Latest Space News
Fri, 19 Sep 2014 09:23:00 +0100
A team of technicians and engineers at Lockheed Martin [NYSE: LMT] has successfully mated together the large system and propulsion modules of the first GOES-R series weather satellite at the company’s Space Systems facilities near Denver, Colorado. The Geostationary Operational Environmental Satellite-R series (GOES-R) is NOAA’s next-generation geostationary weather satellites. The system module of the A2100-based satellite houses more than 70 electronics boxes that comprise the three major e...
Fri, 19 Sep 2014 09:23:00 +0100
Ariane Flight VA220 Preparation activity is underway with Ariane 5 Flight VA220’s ISDLA-1 co-passenger at the Spaceport’s S5C facility in French Guiana. Pre-launch payload processing is moving into full swing for Arianespace’s next Ariane 5 flight, with the mission’s ISDLA-1 telecommunications satellite now undergoing preparations for a targeted October 16 liftoff from French Guiana. To be orbited for two long-standing Arianespace partners – Intelsat and DIRECTV – the high-powered ISDLA...
Thu, 18 Sep 2014 23:00:00 +0100
MacDonald , Dettwiler and Associates Ltd. ("MDA" or the "Company") ( TSX:MDA ), a global communications and information company, today announced that its UK subsidiary has received authorization to proceed from the European Space Agency (ESA) for the development and construction of a Ka band Data Relay terminal flight model for use on the ESA Columbus module of the International Space Station (ISS). The contract is expected to total approximately 14 million euros , and is planned to finalize bef...
Thu, 18 Sep 2014 22:10:00 +0100
Under a new contract with the U.S. Air Force, PlanetiQ LLC will provide an adaptable on-orbit platform for hosting U.S. government payloads as a subcontractor to Millennium Engineering and Integration Company. PlanetiQ, which plans to launch the first commercial constellation of weather and climate satellites, and Millennium are partnering under a contract awarded by the Air Force Space and Missile Systems Center (SMC) through its Hosted Payload Solutions program. The multi-award contract is wor...
Thu, 18 Sep 2014 21:58:00 +0100
NASA has exercised an option to extend a contract with Barrios Technology Ltd. of Houston to provide support to International Space Station activities at NASA's Johnson Space Center in Houston . The cost-plus-award-fee and incentive-fee contract modification increases the overall value of the contract by $83 million to almost $154.5 million . With the extension, the contract now ends Sept. 30, 2016 . Products and services provided under the current contract support mission and program inte...
More space news...
14791 cvs - 551 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • Quick CV Search

    CV: Mechanical Designer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:29-12-2009
     Last Modified:29-12-2009 (04:53)
    Job information
     Current job:Mechanical Designer
     Employment Term:Permanent
     Job location:Own country
     Date available:immediately
     Industry:Satellite Manufacturers and Subcontractors
     KeywordsMechanical designer and or checker for all of antenna products for satelite manufactureing and assembly
    CV

     

                                                              SUMMARY
     Over 40 years experience in the design, checking and detail of mechanical and electro-mechanical devices for commercial and military applications. Including 23 years in the design of antenna systems and hardware for satellite assemblies and 10 years in the design of RF housings and Printed Circuit Boards. Designs included:
     
    Feed Horns         Diplexers       Beam Forming Networks        Reflectors         Waveguide
    Composite Tower Structures    Aluminum Die Castings    Aluminum Investment Castings
    RF Printed Circuit Boards        Analog & Digital Printed Circuit Boards
     
    COMPUTER EXPERIENCE
    7 Years  = Prime Medusa Cad Software on a Prime Medusa Workstation.
    14 Years = SDRC IDEAS Version 12 Software on a HP Terminal using UNIX
    2 Years   = Pro-E Wildfire Mechanical 3D modeling with Interlink on a Dell Computer
    7 Years   = Windows 2003, and Windows XP on a IBM and Dell Computer
     Microsoft Office (Word, Excel, Power Point, MS Scheduler, Visio, MS Project)
     11 Years    = PDM System (Parts Lists and releasable documents)
     
                                                  Professional Experience
     
    Harris Corporation- Melbourne, Fl                  2007 – 2009
     
     Designer and Design / Drafting Checker,
     Designed and Detailed vibration fixtures for multiple programs, consisting of
    Welded and machined assemblies and restraints for reflectors. Checked other Designer Drawings for form, fit and function, ASME Y.14 and MIL-STD-100.
    Coordinated with procurement for the purchase of parts and hardware. Interfaced with Machine Shops in the manufacturing process. All using Harris Drafting and Design Standards, ASME Y14.5 and MIL-STD-100. 
     
    Lockheed Martin Commercial Space –Newtown, Pa
    (Formerly Martin Marietta, GE, RCA)                 1983 – 2006
     
    Senior Design Engineer and Checker of Antenna Payload for Satellite Systems.
    Duties included design and checking of feed networks, various microwave components, tower structures, and reflectors for Form, Fit and Function ASME Y.14 and MIL-STD-100.
    Tower and reflectors—designed using composite materials, such as Kevlar and Graphite bonded to a honeycomb structure.
    Feed Networks—Consisting of various types of aluminum waveguide components designed with formed and or cast bends, and machined flanges.
    Microwave components—Power Divider Networks, Beam forming networks, feed horns, diplexer, and various other components for K-Band, C-Band applications. All of which where manufactured using CNC , EDM, or electro-formed manufacturing processes.
     
    Supervisor of Design Engineers—for 10 years of my employment where spent in the supervisory role. My duties included, scheduling projects, Manpower Reports, Oversee Design development, and detail drawing supervision. Development of time saving and cost cutting procedures. Writing of personnel revues and creating a matrix for raise considerations. Also in charge of hiring direct or sub-contractor personnel when needed
     
     
                                                         Other Experiences
                                Direct or Sub-Contract for the following Corporations
                                -Electro-Nite Co.
                                -ITT Nesbitt Corp.
                                -Jerrolds Electronics Corp.
                                -Univac Corp.
                                -General Electric Corp.
                                -Honeywell Corp.
                                -Microcom Corp.
                                -Fairchilds Space and Defense Corp.
                                -General Atronics Corp. (Div. Of Magnavox)
                                -Commadore Computers Corp.
                                -Ayden Controls.
     
    Range of Duties performed included:
    -Design of Electrical/Mechanical Packaging of Military Communication Equipment.
    -Consisting of Die Castings, Investment Castings, and R.F. Printed Circuit   Boards.
    -Design Layout of Micro-Circuits, and aluminum housings used for Missile Guidance Systems.
    -Design of CATV Equipment including Die Cast Housings, RF Printed Circuit Boards.
    -Design of Rack and Panel Equipment including P.C. Boards layed out from logic diagrams.
    -Design of Air Conditioning Equipment including sheet medal housings, electrical controls, and refrigeration piping.
    -Design electrical package for laser scanner and receiving equipment.
    -Design of plastic housing manufactured for injection molding process used for the manufacture of the Commadore 64 Computer System.
    -Liaison between Manufacturing and Design Engineering Department for equipment manufactures in the United States, Japan, China, and Germany.
    .
     
     
    EDUCATION
    Frankford High School, Major: Mechanical Drawing                  Graduated 1968
     
    MILITARY     
    Army National Guard….Army Corp of Engineers….Honorable Discharge.           1970 - 1976     


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
     
    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
     
    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 
     
    Pricing starts at €400 (approx £350 or US$550 - use the convert tool for an exact conversion) for one month unlimited job postings and CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and CV database access for one year at less than €250 per month!
     
    2014 Pricing Structure (excluding VAT):
    1 month - Discovery 400 euros convert
    3 months - Bronze 1050 euros convert
    6 months - Silver 1800 euros convert
    12 months - Gold 2950 euros convert
     
    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.
     
    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
     
    VAT:
     
    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
     
    Support:
     
    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.
    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
     
    Warning:
     
    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.
     
    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
     
    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted in the absence of an email.
    Bookmark and Share
    Terms & ConditionsCopyright ©2014 Spacelinks