Latest Space News
Sun, 17 Nov 2019 23:42:07 +0000
Maj. Gen. Stephen Whiting said the transfer of space traffic management responsibilities can't happen until Commerce gets the necessary resources. SpaceNews.com
Fri, 15 Nov 2019 22:36:16 +0000
The 10-year contract is for operations and support of the Advanced Extremely High Frequency, Milstar and Defense Satellite Communications System constellations. SpaceNews.com
Fri, 15 Nov 2019 18:51:17 +0000
Exos Aerospace said the failed launch of a reusable suborbital sounding rocket last month was caused by a structural failure of the rocket shortly after liftoff. SpaceNews.com
Fri, 15 Nov 2019 12:28:02 +0000
NASA’s inspector general warned in a new report that, because of commercial crew delays, utilization of the International Space Station will drop sharply in 2020 and that NASA runs the risk of losing access entirely by next fall. SpaceNews.com
Thu, 14 Nov 2019 23:52:00 +0000
EchoStar has ordered two tiny S-band satellites from Tyvak Nano-Satellite Systems to jumpstart a low-Earth-orbit constellation using spectrum gained through its October acquisition of IoT startup Helios Wire.  SpaceNews.com
Thu, 14 Nov 2019 22:06:27 +0000
NASA paid Boeing nearly $300 million more than originally planned in its commercial crew contract in part because of agency concerns that the company might drop out of the program, a new report claims. SpaceNews.com
Thu, 14 Nov 2019 21:47:58 +0000
SDA is the new term replacing Space Situational Awareness, according to an Oct. 4 memo from Air Force Space Command. SpaceNews.com
Thu, 14 Nov 2019 20:29:46 +0000
Loft Orbital has raised a fresh $13 million to continue development of a constellation of small satellites purpose-built to carry a mix of payloads for customers who don’t want to fly their own satellites.  SpaceNews.com
Thu, 14 Nov 2019 17:19:54 +0000
With growing bipartisan skepticism that NASA’s current plan to return humans to the moon by 2024 is achievable, members of the House Science Committee used a Nov. 13 hearing to advocate for a different, and arguably more conventional, approach. SpaceNews.com
Thu, 14 Nov 2019 12:04:44 +0000
SpaceX successfully tested Nov. 13 the thrusters used as part of the abort system for its Crew Dragon spacecraft, nearly seven months after a similar test resulted in the loss of another spacecraft. SpaceNews.com
Thu, 14 Nov 2019 04:49:10 +0000
The Senate Commerce Committee approved Nov. 13 a NASA authorization bill introduced a week earlier to extend the life of the International Space Station and support other agency programs. SpaceNews.com
Thu, 14 Nov 2019 01:37:18 +0000
Launcher won its first government funding when the U.S. Air Force awarded the the Brooklyn-based startup $1.5 million to accelerate development and testing of its E-2 rocket engine. SpaceNews.com
Wed, 13 Nov 2019 22:52:54 +0000
Chairman Adam Smith said House-Senate divide is deepening over the establishment of a Space Force SpaceNews.com
Wed, 13 Nov 2019 21:01:43 +0000
Mark Rigolle, CEO of LeoSat, told SpaceNews Nov. 13 that the company laid off all 13 employees — himself included — in August after its earlier investors decided not to fund the company any longer.  SpaceNews.com
Wed, 13 Nov 2019 19:41:33 +0000
Isotropic Systems has completed two-way communications tests of its electronically steered antenna using Avanti’s Hylas-4 satellite. SpaceNews.com
Wed, 13 Nov 2019 17:48:11 +0000
In its ongoing quest to increase launch vehicle production, Rocket Lab has unveiled a new industrial robotic system designed to speed up manufacturing of its Electron rocket. SpaceNews.com
Wed, 13 Nov 2019 17:03:25 +0000
The former chairman of the House aviation subcommittee and adviser to United Launch Alliance argues that all commercial spaceflight companies should support, rather than disrupt, the FAA's ongoing effort to streamline existing launch licensing processes. SpaceNews.com
Wed, 13 Nov 2019 12:56:40 +0000
China launches six remote sensing satellites into orbit with two launches inside three hours from sites in north China. SpaceNews.com
Wed, 13 Nov 2019 11:00:40 +0000
A new study says companies can build, launch and operate constellations to gather global imagery with a resolution of one meter for a fraction of the cost of previous constellations. SpaceNews.com
Wed, 13 Nov 2019 10:29:40 +0000
A NASA official warned that extended delays in finalizing a fiscal year 2020 budget for the agency could have implications for its ability to stay on schedule for returning humans to the moon in 2024. SpaceNews.com
More space news...
19506 cvs - 692 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Senior Process Development Specialist

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:06-01-2011
     Last Modified:06-01-2011 (10:25)
    Job information
     Current job:Senior Process Development Specialist
     Employment Term:Either
     Job location:Own country
     Date available:
     Industry:
     KeywordsIntegral project leader, laser processing expert, product development, materials and metallurgical expert
    CV

     

    OBJECTIVE

    Leading and managing projects solving a wide variety of metallurgical and engineering problems based on 20 years of applied and fundamental research and experience on materials, welding engineering and product development. The optimal position will be one combining management and technical expertise and provide professional growth and opportunities to contribute to a dynamic organization as a Team Leader with expertise in metallic materials and welding engineering advising customers internally and externally on materials choices.

     

    EDUCATION

    Colorado School of Mines, Golden, Colorado

    1995 - 1999

    PhD in Metallurgical and Materials Engineering

    Thesis research: Laser Gas Alloying of titanium compressor blades for military aircrafts of the US Navy. Study chemical and physical aspects as well as the implementation.

    Minor subject: Physics

     

    Delft University of Technology, Delft, The Netherlands           

    1987 - 1994

    Ir. in Material Science

    Thesis research: Physical aspects of the Gas Tungsten Welding arc and the metallurgical behavior of the weld pool using an argon/hydrogen gas mixture as shielding gas.

     

    Professional Training

    NIMO project management institute, Soesterberg, The Netherlands

    2009

    ·      Practical projectmanagement

     

    University of Southampton

    2008

    ·      Electrochemistry, Electrochemical Engineering and Electrochemical

    Technology

     

    Corus, Beverwijk, The Netherlands           

    2001

    Laser operation and safety training: training in laser safety regulations and operational instructions for the Trumpf 4400 W diode pumped laser and Trumpf CO2 laser.

    2002

    Project management course

     

    Morotech Robotics, Tiel, The Netherlands           

    2002

    Robot operations training: programming, safety and operation training of Staubli robots

     

    Delft University of Technology, Delft, The Netherlands           

    2001

    Electron Microscopy: usage of WDX and the scanning options of EDX (electron dot mapping)

     

    Colorado School of Mines, Golden, Colorado

    1996

    Electron Microscopy: extended course in the theory and practice of electron microscopy, including the scanning electron microscope, transmission electron microscope and the scanning transmission electron microscope, as well as the usage of EDX and the analytical techniques of diffraction patterns.

    XPS: analytical techniques and theoretical background

    Auger Spectroscopy: analytical techniques and theoretical background

     

    PROFESSIONAL EXPERIENCE

    Stork Prints BV, Boxmeer, The Netherlands

    March 2008 – current

    Senior Process Development Specialist

    ·      Management of integral project teams

    ·      Responsible for leading and performing research and development projects

    o      Integral Project Leader

    o      Setting up production facilities for new products

    ·      Developmental projects in the field of:

    o      Consumables, such as printing screens and other printing techniques

    o      Electrochemistry

    o      Galvano technology.

    o      Electroforming, plating, sputtering, etching,

    o      Processing of carbon and glass fiber reinforced products

    o      Laser processing

    o      Electro chemical machining

     

    Delft University of Technology, Delft, The Netherlands           

    February 2007 – February 2008

    ·      Researcher at Aerospace Engineering department

    ·      Leading project on acquisition and implementation of Friction Stir Welding

    o      Damage tolerance assessment of Friction Stir Welding

    o      Acquiring friction stir welding equipment and setting up friction stir welding research facilities

    o      Developing research projects with industrial partners

    o      Teaching and supervising PhD students

     

    July-December 1994

    ·      Researcher at Materials Science department

    ·      Project leader for the “Nederlands Instituut voor Lastechniek” (Dutch welding society):

    o      Weldability study of dissimilar aluminum alloys.

     

    Lastechniek, Nederlands Instituut voor Lastechniek, Zoetermeer, The Netherlands           

    2006-2008

    ·      Lid redactieraad vakblad Lastechniek; dit is het vakblad op het gebied van verbindingstechnieken

     

    Netherlands Institute for Metals Research, Delft, The Netherlands           

    1999 – 2007

    ·      Researcher and application engineer embedded in the Joining and mechanical behavior group of the Materials Science department;

    ·      Project leader, supervisor and researcher

    ·      Acquire capital laser welding equipment and setting up complete laboratory and research facilities for laser welding with continuous and pulsed wave Nd:YAG

     

    Colorado School of Mines, Golden, Colorado                                   

    1997 – 1999

    ·      Research Assistant

    ·      Consulting work for:

    ·      Electric Propulsion Laboratory: Study weldability of exotic metals including tungsten, molybdenum and niobium (for aerospace application NASA)

    ·      OEA US: Airbag inflators welding failure analyses

    ·      Furbish and setup laser welding and processing laboratory

     

    1995 – 1997

    ·      Teaching Assistant

    ·      Setting up and supervising of laboratory work for undergraduate students

    ·      Prepare, teach and grade classes

     

    SELECTED PUBLICATIONS AND PRESENTATIONS

    Publications:           

    §       Zadpoor, A. A., Sinke, J., Benedictus, R., Pieters, R., 2008, Mechanical properties and microstructure of friction stir welded tailor-made blanks, Materials Science and Engineering A, vol. 494, pp. 281-290.

    §       H.J.K. Lemmen, R.C. Alderliesten, R.R.G.M. Pieters, R. Benedictus, Fatigue and Damage Tolerance of Friction Stir Welded Joints in Fuselage Structures, 2008, Int. Conf. on Fatigue Damage of Struct. Mat. VII, Hyannis, MA, USA

    §       Pieters R.R.G.M., Goes C., Rietman B. and Richardson I.M., Zinc Transport Phenomena in Laser Welding of Coated Sheet Steel in Overlap Configuration” 6.18 IV-917-06, Commission IV, IIW 2006, Quebec, CA

    §       Gower, H. L., Pieters, R. R. G. M., & Richardson, I. M. (2006). Pulsed laser welding of metal-polymer sandwich materials using pulse shaping. Journal of laser applications, 18(1), 35-41.

    §       Hermans M.J.M., Aa E.M. van der, Pieters R.R.G.M., and Wojtas A.S. (2005). Barkhausen Noise Measurements for Residual Stress Analysis in Welded Dual Phase Steel- the influence of active cooling during welding -5th International Conference on Barkhausen Noise and Micromagnetic Testing, June 2-3, 2005, Netherlands,

    §       Pieters, R. R. G. M., & Richardson, I. M. (2005). Laser welding of zinc coated steel in overlap configuration with zero gap. Science and Technology of Welding & Joining, 10(2), 142-144.

    §       Pieters R R G M, Krasnoperov M Y, and Richardson I M. (2003). Laser welding of high strength steels. In: Applications of lasers and electro-optics. Proceedings, 22nd international congress, ICALEO 2003, jacksonville vol.95. Laser materials processing conference, section A - welding. Paper no. P522. pp.294-303.

    §       Krasnoperov M Y, Pieters R R G M, and Richardson I M. (2003). Solidification features of the thin steel sheets in keyhole welding. In: Applications of lasers and electro-optics. Proceedings, 22nd international congress, ICALEO 2003, Jacksonville vol.95. Laser materials processing conference, section A - welding. Paper no. P509. pp.285-293.

    §       Pieters R.R.G.M. en Liu S., ”Formation of TiN by Laser Gas Alloying (LGA) of Ti-6Al-4V alloy in Nitrogen Atmosphere.” Proceedings Surface Modification of Titanium, The Minerals, Metals & Materials Society.

    §       Onsoien M., Pieters R., Olson D.L. en Liu S., ”Effect of Hydrogen in an Argon Shielding Gas: Arc Characteristics and Bead Morphology.” Welding Journal, Vol. 74, (1995) 10s-15s.

     

    Presentations:

    §       Yearly conference of the International Institute for Welding (IIW), 1999-2006

    §       Conference ICALEO 2006

    §       Conference TMS/ASM, San Diego and Chicago 1998

    §       Conference: American Welding Society, April 1997 and 1998

    §       Conference: ASM/TMS October 1996.

    §       Semi annual conference of ACSEL 1996-1998.

     

    PROFESSIONAL MEMBERSHIPS

    §       American Welding Society (secretary of the student chapter 1996-1997)

    §       The Minerals, Metals & Materials Society

    §       The Laser Institute of America


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2019 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2019 Spacelinks
    Web Analytics