I was employed by Grove Resources Solutions Inc. (GSRi) to close the Radiation Belt Storm Probes (RBSP) program under Johns Hopkins University Applied Physics Laboratory. My primary experience is with Lockheed Martin Space Systems Company as a Senior Hardware Engineer. I started work at Lockheed Missiles & Space on the D5, Trident II development Program as a Parts Engineer. This development included evaluating design requirements imposed on the Harris design teams in the form of Source Control Drawings (SCD's). As development progressed, these SCD's were revised to implement design changes. My technical responsibilities included testing parts received in both the development manufacturing phases of the D5 Program. In cases of failure analysis, I used both my knowledge of the application and the IC design to determine the failure causes. My technical responsibilities included testing parts received in both the development manufacturing phases of the D5 Program. In cases of failure analysis, I used both my knowledge of the application and the IC design to determine the failure causes. There were cases where test limits had to be relaxed resulting in a SCD revision. My responsibility then shifted to technically justifying the relaxed test limits by proving that the change would not impact the reliability and performance over the mission life of the system.
After the successful development and progression into manufacturing, I moved from the Sunnyvale Missiles & Space division to the Palo Alto Advanced Technology Center where I worked on three NASA programs. This experience in development, testing and procurement laid a firm foundation for the transfer to the Palo Alto Advances Technology Center. I used this SCD experience in parts selection for the NASA programs. I also used my procurement sources that I developed to meet the immediate delivery schedule imposed by the contract. I returned to the Sunnyvale facility where I was the Parts Engineer for the Airborne Laser Program (ABL), Mobile User Objective System (MUOS), and the P734 Program. I’m also chaired the Anomaly Event Review Board (AERB) that oversaw Parts Materials and Processes (PMP) item reviews that are introduced by actual or potential anomalous conditions concerning PMP.
My technical experience in design development and failure analysis combined with procurement experience qualifies me for the Applications Engineer. I look forward to discussing my specific experience in an interview.
Extensive electrical engineering background, including evaluation and implementation of design requirements. Experienced in hardware and software test and analysis to determine reliability and verify performance over component and system life cycle. Also experienced in failure investigation and analysis of data required to determine root cause. A self-starter with demonstrated willingness to accept new responsibilities. Currently hold DoD Secret Clearance.
LOCKHEED MARTIN SPACE SYSTEMS COMPANY 1984 - 2009
Associate Engineer Sunnyvale, CA (1984 – 1985)
Research Engineer Sunnyvale, CA (1985 – 1997)
Hardware Engineer, Sr. Sunnyvale, CA (1997 – 1988)
Research Engineer, Sr. Palo Alto, CA (1988 – 1996)
Electronics Engineer, Sr. Sunnyvale, CA (1996 – 1997)
Hardware Engineer, Sr. Sunnyvale, CA (1997 – 2009)
Grove Resource Solutions Inc. (GRSi)/Johns Hopkins University Applied Physics Laboratory
Component Engineer Laurel, MD (2010)
Parts Engineer in Support of Multiple Programs
· Mobile User Objective System (MUOS): Perform Engineering oversight of parts selection for design of program Space and Ground segments. Disposition Government Industry Data Exchange Program (GIDEP) failure reports (Alerts and Problem Advisories) and Mission Success Bulletins (MSBs).
· Airborne Laser (ABL) Hard Wire Abort System (HWAS): Perform Parts Engineering functions during design and development phase. Disposition GIDEP failure reports MSBs.
· P734 (Classified Program): Review and approve Engineering Data Packages. Disposition. GIDEP failure reports and MSBs.
Sitting Member of Anomaly Experience Review Board (AERB)
Evaluate and Disposition. GIDEP failure reports and MSBs from Mission Success with respect to common parts and material not associated with any Program. Provide analysis in support of Stock Sweep requests from Quality Assurance.
Perform database searches to determine parts usage by Program. Notify Programs of the need to evaluate possible risks associated with parts usage based on GIDEP and MSB documents.
Electronics Engineer, Sr. Sunnyvale, CA
Assisted A2100 Worked with Central Engineering to close delinquent open items form the A2100 Critical Design Review (CDR).
Acquired knowledge and skills to program Field Programmable Gate Arrays (FPGA) as required to satisfy scheduled delivery dates for multiple Programs, including A2100, HIRDLs, SXI and INCUBATOR.
Research Engineer, Sr. Palo Alto, CA
Coordinated with System Designers to produce Specification Control Drawings (SCD) used in the design and fabrication of custom Linear and Digital Integrated Circuits.
Directed the implementation and of the automatic tester, LTX, automated test sequence software.
Research Engineer Sunnyvale, CA
· TRIDENT II :Fleet Ballistic Missile design, development and deployment.
· Assisted in Program development by authoring SCD documents associated with Radiation Hardened Linear and Digital microcircuits.
· Monitored microcircuit performance during in-flight missile tests.
· Performed test data analysis to trace the X-9 flight test failure root cause to a Linear Switching Regulator fault. Assisted Parts Engineering with development of Corrective Action by running software simulations.
University of California, Berkeley, CA
BS Electrical Engineering and Computer Science
AWARDS & CERTIFICATES
Department of Navy Reliability, Maintainability and Quality Assurance Award 1990
For development of Inspection Criteria for Hybrid Integrated Circuits.
Lockheed Martin Productivity Improvement Program, Superior Team Performance Award
For efforts to resolve Flight Control Electronic Package Failures
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs.
2022 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at email@example.com. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing firstname.lastname@example.org. Accounts found not to be in compliance will be deleted.