Latest Space News
Tue, 13 Apr 2021 14:43:02 +0000
York Space Systems has learned a lot from operating its first production-model spacecraft in orbit for two years. The biggest takeaway, though, has been the need to automate satellite handling on the ground. SpaceNews
Tue, 13 Apr 2021 13:58:34 +0000
Space will command nearly 45 percent of the $1.9 billion Korea Aerospace Industries (KAI) has set aside for a broader five-year growth plan. SpaceNews
Tue, 13 Apr 2021 13:00:36 +0000
Astrobotic has signed a contract with SpaceX for the launch of its Griffin lunar lander, carrying a NASA lunar rover, on a Falcon Heavy in 2023. SpaceNews
Tue, 13 Apr 2021 13:00:17 +0000
Slingshot Aerospace won a $1.2 million contract to develop software to help Space Force satellite operators visualize missile detection and warning. SpaceNews
Tue, 13 Apr 2021 08:33:43 +0000
A Long March 7 rocket has arrived at China’s coastal Wenchang spaceport to facilitate the Tianzhou-2 supply mission to a soon-to-launch space station module. SpaceNews
Tue, 13 Apr 2021 06:00:28 +0000
Orbital Sidekick announced a $16 million Series A funding round April 13 led by Singapore investment giant Temasek that clears the way for the company to complete development of its first constellation of hyperspectral imaging satellites. SpaceNews
Tue, 13 Apr 2021 03:06:44 +0000
A test flight of Blue Origin’s New Shepard suborbital vehicle, scheduled for as soon as April 14, will be a dress rehearsal for long-awaited crewed flights. SpaceNews
Mon, 12 Apr 2021 21:54:43 +0000
SDA is seeking feedback on vendors' ability to support a homogeneous constellation design. SpaceNews
Mon, 12 Apr 2021 20:32:45 +0000
DARPA selected Blue Origin and Lockheed Martin to develop competing spacecraft concepts for a demonstration of nuclear thermal propulsion. SpaceNews
Mon, 12 Apr 2021 20:19:19 +0000
Northrop Grumman’s MEV-2 satellite servicer successfully docked April 12 with Intelsat’s in-orbit 10-02 spacecraft. SpaceNews
Mon, 12 Apr 2021 20:02:00 +0000
The Atlantic Council released a new report that calls on the United States and allies to advocate for new global rules for safe operations in outer space.  SpaceNews
Mon, 12 Apr 2021 19:54:30 +0000
L3Harris Technologies and Raytheon Intelligence & Space won NASA contracts to carry forward studies of next-generation imagers for the National Oceanic and Atmospheric Administration (NOAA) Geostationary and Extended Orbits satellites. SpaceNews
Mon, 12 Apr 2021 11:30:17 +0000
The United Arab Emirates doubled the size of its astronaut corps April 10 with the selection of two new astronauts, including the first woman, who will train at NASA starting later this year. SpaceNews
Mon, 12 Apr 2021 08:00:37 +0000
German launch services provider Exolaunch is developing a line of eco-friendly space tugs called Reliant, designed to clean up debris after sending satellites to custom orbits. SpaceNews
Sat, 10 Apr 2021 21:03:13 +0000
NASA announced April 10 it was postponing the first flight attempt of the Ingenuity helicopter on Mars by at least three days after detecting a problem during a final pre-flight test. SpaceNews
Sat, 10 Apr 2021 10:56:08 +0000
DARPA awarded a $22 million contract to General Atomics to design a small nuclear reactor for space propulsion. SpaceNews
Fri, 09 Apr 2021 15:56:04 +0000
The White House released a first look at its budget proposal for fiscal year 2022 that includes an increase in funding for NASA, particularly Earth science and space technology programs. SpaceNews
Fri, 09 Apr 2021 14:05:23 +0000
Japanese camera maker Nikon has acquired a controlling stake in U.S. startup Morf3D, an aerospace supplier that has produced 3D-printed hardware for Boeing satellites and helicopters. SpaceNews
Fri, 09 Apr 2021 11:45:58 +0000
A Soyuz spacecraft carrying two Russian cosmonauts and one American astronaut arrived at the International Space Station April 9, a few hours after its launch from Kazakhstan. SpaceNews
Fri, 09 Apr 2021 00:16:49 +0000
The new chief executive of OneWeb says the company is still pursuing some kind of navigation capability for its broadband satellite constellation, although a full-fledged service may have to wait until a second-generation system. SpaceNews
More space news...
20228 cvs - 498 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Research Engineer

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:26-05-2011
     Last Modified:26-05-2011 (06:41)
    Job information
     Current job:Research Engineer
     Employment Term:Temp/Contract
     Job location:Anywhere
     Date available:within a month
     Industry:
     KeywordsGNC spacecraft development dynamics and control
    CV

    OBJECTIVE

     

    Perform technical engineering work in the field of dynamics and control with a leading company in the space industry.

     

     

    EMPLOYMENT HISTORY

     

    January 2011 to May 2011

    McGill University, Montreal, Canada

    Course Instructor, Mechanical Engineering

    ·         Course instructor for MECH 262, Statistics and Measurement Laboratory.

    ·         Developed curriculum and delivered three lectures per week related to measurement and experimentation. I am also responsible for the coordination of nine experiments performed by the students in the laboratory, which involves supervising a team of six teaching assistants.

     

    June 2009 to Present

    Canadian Space Agency, St. Hubert, QC

    Research Engineer

    ·         Research engineer with the Control Group of the Space Science and Technology department.

    ·         I am currently the project lead for mission planning for a formation flying nanosatellite project, JC2Sat. This involves developing and testing control algorithms for autonomous formation flying using differential drag as the only actuation. An advanced orbital simulation developed in Matlab/Simulink is used to assess the formation flying performance expected on orbit.

    ·         I am also a member of the attitude determination and control team for the JC2Sat mission. This involves studying the dynamics behaviour of the satellite attitude using a Simulink model, as well as testing the flight hardware. I am responsible for demonstrating a hardware-in-the-loop simulation as part of the satellite development process.

     

    June 2007 to February 2009

    Tokyo University, Tokyo, Japan

    Research Engineer

    ·         Research engineer with the Intelligent Space Systems Laboratory at Tokyo University.

    ·         My work focused on developing and testing satellite components for small-scale satellite development. This included an extensive vibration analysis of an optical lens-boom to be installed on an earth imaging satellite. The vibration analysis includes theoretical modeling and experimental system identification. The portable experimental system was tested during micro-gravity experiments I conducted during high-altitude parabolic flights.

    ·          I was also a member of the attitude determination and control system team for the Nano-Jasmine satellite. This work focused on developing a high precision control system for the satellite using reaction wheels and magnetic torque actuators, and star trackers and gyro sensors.

     

    September 2002 to April 2006

    McGill University, Montreal, Canada

    Teaching Assistant

    ·         Worked as a teaching assistant for ten mechanical engineering courses including Mechanics I (Statics), II (Dynamics) and III (Vibrations), Dynamics of Systems and Mechanical Laboratory.

    ·         Duties included substitute lecturing, instructing weekly tutorials, grading exams and laboratory reports, and supervising experiments.

     

    September 1999 to December 2001

    University of Victoria, Canada

    Teaching Assistant

    ·         Worked as a teaching assistant for six mechanical engineering courses including Machine Dynamics, Fluid Mechanics and Dynamics.

    ·         Duties included giving tutorials, grading assignments and tests, and supervising experiments.

     

    May to September 1998

    Imperial Oil, Calgary, Canada

    Project Manager

    ·      Directly managed three small-scale oil and gas field projects (< $500 K) at Imperial Oil’s Norman Wells reservoir development in the Northwest Territories.

    ·      I was responsible for managing the budget, schedule, and quality of the work according to Imperial Oil’s project implementation protocol, which involved site visits and project reviews with contractors and management.

     

    September 1997 to April 1998

    Imperial Oil, Calgary, Canada

    Reservoir Engineer

    Supervisor: Steve Brown

    ·      As a junior member of Imperial Oil’s Norman Wells’ reservoir asset management team, I worked with reservoir engineers and geologists to improve the production performance of the Norman Wells, NWT, oilfield. My first project involved a thorough study of the waterflood performance of the mainland portion of the reservoir.

    ·      As a result of the analysis, a fracture network was mapped and regions were identified where the waterflood was not effective in advancing the oil reserves. I selected two infill drilling locations and assisted with development of a drilling project. The results of my analysis were used with a reservoir simulation to obtain production predictions, and the economic impact of the proposed infill wells was estimated. I authored a project proposal and presented it to the asset management committee who granted approval for the $2M drilling program.

     

     EDUCATION

     

     

        September 2002 to November 2006

          Doctor of Philosophy, Mechanical Engineering

          McGill University, Montreal, QC

          Supervisor: Meyer Nahon

          Dissertation Title: Dynamics and Control of a Multi-Tethered Aerostat Positioning System                               

    ·          I performed a detailed analysis of an aerial positioning system which included extensive dynamics modeling and experimental investigations. The response of the multi-tethered aerostat system was predicted using a lumped-mass dynamics model subject to turbulent wind input. The model was validated by comparing the estimated behaviour to measurements of a scaled experimental system.

    ·          The performance of the system was enhanced through the design and implementation of a feedback control system. The controllers were tested on the experimental system and demonstrated high precision positioning capabilities. The dynamics model was used to develop and study advanced optimal control strategies.

    ·          The experimental phase of the project was a joint collaboration with the NRC’s Herzberg Institute for Astrophysics located in Penticton, B.C. I worked alongside several senior engineers and contributed to the development, testing and operation of the $1 million facility.

         

          September 1999 to January 2002

          Masters of Applied Science, Mechanical Engineering

          University of Victoria, Canada

          Supervisor: Meyer Nahon

          Thesis Title: Dynamics Modeling and Conceptual Design of a Multi-Tethered Aerostat

                                    System       

    ·         My thesis research project involved analyzing and developing a novel aerostat positioning system. I developed a dynamics model of the system and also designed an experimental testing facility. The design of the experimental system included choosing an aerostat with desired aerodynamic properties, selecting high-performance cables, and developing an advanced motion control system for the tether winch system. Simulations of the dynamics model provided the design specifications through an iterative optimization process. The aerodynamic behaviour of a tethered aerostat was analyzed by performing a linear stability analysis using the dynamics model.

     

          September 1994 to April 1999

          Bachelor of Applied Science, Mechanical Engineering

          University of Calgary, Canada

        ·          Graduated with internship honours after completing the requirements of the internship

                 program.

    ·          Design project was a combustion chamber of an engine for a diver propulsion vehicle.

     

     

    HONOURS AND AWARDS

     

     

    International Symposium on Space Technology and Science, Hamamastu, Japan

          ·         1st place in Control System Design Contest, ¥30 000 (2008)

              

    McGill University

      ·         McGill Major Graduate Scholarship, $15 000 (2005 to 2006)

     

    le Fonds Quebecois de la Recherche sur la Nature et les Technologies

    • Doctoral Research Scholarship (FQRNT, B2), $20 000 (2004 to 2005)

    Natural Science and Engineering Research Council of Canada

    • Postgraduate Scholarship (PGS-B), $21 000/yr (2002 to 2004)

    Professional Memberships

     

     

    APEGGA, Association of Professional Engineers, Geologists and Geophysicists of Alberta – registered as a professional engineer as of May 2010

          AIAA, American Institute of Aeronautics and Astronautics – member since 2002

          CASI, Canadian Aeronautics and Space Institute – member since 2010

     

     

    Languages

     

    English: mother tongue

    French: read at an upper-intermediate level, write, speak and comprehend orally at an intermediate level

    Japanese: write, read, speak and comprehend orally at a lower-intermediate level

    Spanish: read, speak and comprehend orally at a lower-intermediate level

     

    PUBLICATIONS 

     

    Journal Articles

    Lambert, C., Ng, A., Kumar, B., Hamel, J-F., Implementation and Performace of Formation Flying Using Differential Drag, submitted to the AIAA Journal of Guidance, Control, and Dynamics, January 2011.

    Lambert, C., Ng, A., Nakamura, Y., Horiguchi, H., Inter-Satellite Separation Mechanism for the JC2Sat Formation Flying Mission, in press AIAA Journal of Spacecraft and Rockets, 2011.

    Chakravarty, M.M., Broadbent, S., Rosa-Neto, P., Lambert, C.M., Collins, D.L., Design, Construction, and Validation of an MRI-Compatible Vibrodactile Stimulator Intended for Clinical Use, Journal of Neuroscience Methods, Vol. 184, No. 1, pp. 129-135, October 2009.

    Lambert, C., Nahon, M., Chalmers, D., Implementation of a Multi-Tethered Aerostat Positioning System with Feedback Control, ASME/IEEE Transactions on Mechatronics, Vol. 12, No. 1, 2007.

    Lambert, C., Nahon, M., Chalmers, D., Gilardi, G., Cable Control of an Aerostat Platform – Experimental Results and Model Validation, AIAA Journal of Guidance, Control, and Dynamics Vol. 30, No. 2, 2007.

    Lambert, C., Nahon, M., Chalmers, D., Study of a Multi-Tethered Aerostat System – Experimental Observations and Model Validation, AIAA Journal of Aircraft, Vol. 43, No. 4, pp. 1182-1189, 2006.

    Nahon, M., Lambert, C., Chalmers, D., Bo, W., Model Validation and Performance Evaluation for the Multi-Tethered Aerostat Subsystem of the Large Adaptive Reflector, Experimental Astronomy, Vol. 17, No. 1-3, pp. 163-175, 2004.

    Lambert, C., Nahon, M., Stability Analysis of a Tethered Aerostat. AIAA Journal of Aircraft, Vol. 40. No. 4, pp. 705-715, 2003.

    Buckham, B., Nahon, M., Seto, M., Zhao, X., Lambert, C., Dynamics Simulation of a Towed Underwater Vehicle System, Part I: Model Development, Ocean Engineering, Vol. 30, No. 4, pp. 453-470, 2003.

    Lambert, C., Nahon, M., Buckham, B., Zhao, X., Seto, M., Dynamics Simulation of a Towed Underwater Vehicle System, Part II: Model Validation and Turn Maneuver Optimization, Ocean Engineering, Vol. 30, No. 4, pp. 471-485, 2003.

    Nahon, M., Gilardi, G., Lambert, C., Dynamics and Control of a Radio Telescope Receiver Supported by a Tethered Aerostat, AIAA Journal of Guidance, Control, and Dynamics, Vol. 25, No. 6, pp. 1107-1115, 2002.
     


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2021 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2021 Spacelinks
    Web Analytics