Latest Space News
Fri, 24 May 2019 21:46:28 +0000
An ability to get on contract quickly and a price far lower that other companies were key factors in NASA’s decision to award a contract to Maxar Technologies for the first element of the lunar Gateway, the Power and Propulsion Element (PPE). SpaceNews.com
Fri, 24 May 2019 20:28:47 +0000
The filings show SpaceX sold all but $18.8 million of the shares available between the two rounds. The company raised $1.022 billion in total. SpaceNews.com
Fri, 24 May 2019 15:23:28 +0000
Boeing has completed ground testing of the thrusters for its CST-100 Starliner commercial crew vehicle, nearly a year after a setback in earlier testing of those thrusters. SpaceNews.com
Fri, 24 May 2019 15:04:26 +0000
Fifty-eight years ago, almost to the day, President Kennedy declared what was, at the time, a bold national goal: To send a man to the moon within a decade, and “return him safely to Earth.” The greatest challenge of Apollo was not the former, but the latter. SpaceNews.com
Fri, 24 May 2019 12:46:52 +0000
In the days since the May 3 release of the Air Force’s formal call for proposals for the National Security Space Launch Phase 2 Launch Service Procurement, new squabbles have arisen as bidders scrutinize the final solicitation for anything that might tilt the competition in a rival’s favor. SpaceNews.com
Fri, 24 May 2019 11:22:58 +0000
A former space industry executive who joined NASA to guide its revamped lunar exploration strategy has left the agency after just a month and a half. SpaceNews.com
Fri, 24 May 2019 03:49:33 +0000
The rocket took off from Cape Canaveral, Florida at 10:30 p.m. Eastern, and deployed the satellites into a low Earth orbit a little over an hour later. SpaceNews.com
Thu, 23 May 2019 23:01:45 +0000
The SASC bill makes the commander of Air Force Space Command also the commander of the U.S. Space Force for the first year. SpaceNews.com
Thu, 23 May 2019 22:38:44 +0000
As is often the case with procurement reforms Congress imposes on DoD, the devil is in the implementation. And lawmakers now worry that DoD may be overusing Section 804 in programs where skipping tests and reviews could be problematic. SpaceNews.com
Thu, 23 May 2019 22:38:05 +0000
Is it time for the Navy to turn over the Mobile User Objective System to the Air Force? The House Appropriations Committee is calling on the leaders of the services to consider such a move. SpaceNews.com
Thu, 23 May 2019 22:23:07 +0000
Ground stations in Ohio and Oregon mark the first two of a planned 12 stations spread out globally to enable communication with satellites, allowing operators to downlink data such as imagery and weather. The stations also enable operators to control their satellites. SpaceNews.com
Thu, 23 May 2019 18:47:56 +0000
NASA has selected Maxar Technologies to develop the first element of its lunar Gateway, the Power and Propulsion Element, for launch in late 2022. SpaceNews.com
Thu, 23 May 2019 12:39:30 +0000
A Long March 4C rocket carrying the Yaogan-33 reconnaissance satellite failed following its May 23 liftoff, Chinese state-run media confirmed. SpaceNews.com
Thu, 23 May 2019 12:13:45 +0000
The NewSpace sector is expected to grow from a $350 billion global industry in 2018 to a trillion dollar one by 2040, according to a Morgan Stanley report. Given these forecasts it is not clear how the market will expand, will there be more mergers and acquisitions, initial public offerings, initial coin offerings or just companies remaining private? SpaceNews.com
Thu, 23 May 2019 05:54:43 +0000
NOAA’s Satellite and Information Service is requesting nearly $17.3 million in 2020 funding for a series of initiatives to explore the potential contributions of new data partnerships, small satellites and advanced technologies. SpaceNews.com
Wed, 22 May 2019 22:43:02 +0000
Olis Robotics is working to demonstrate the application of its autonomy software for NASA, the Air Force and others space customers to support internal and external space servicing, assembly, manufacturing and operational concepts,” said Blaine Levedahl, Olis Robotics’ U.S. government programs director. SpaceNews.com
Wed, 22 May 2019 22:03:03 +0000
Blue Origin, Northrop Grumman and United Launch Alliance have filed 'motions to intervene' in the lawsuit filed by SpaceX against the U.S. government SpaceNews.com
Wed, 22 May 2019 21:40:16 +0000
With congressional funding and industry support, nuclear thermal propulsion technology is making progress for potential use on future NASA deep space missions, although how it fits into the agency’s exploration architectures remains uncertain. SpaceNews.com
Wed, 22 May 2019 21:04:29 +0000
Hawkeye 360, a company flying a constellation of small satellites to map radio frequency signals, announced a partnership May 22 with Windward, a company focused on maritime risks, to offer customers insights on the maritime environment. SpaceNews.com
Wed, 22 May 2019 20:30:41 +0000
Although NASA’s Mars Laser Communications Demonstration never flew, the project proceeded far enough to establish a price for terminals to relay data for the Mars Telecommunications Orbiter: $90 million. SpaceNews.com
More space news...
19240 cvs - 788 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Design engineer

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:18-12-2011
     Last Modified:18-12-2011 (03:03)
    Job information
     Current job:Design engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:immediately
     Industry:Civil Agencies/International Organizations, Consulting/Engineering Services
     KeywordsProjects: Boeing 737,747-8, 767, 777, 787 (Propulsion Systems, SNCRC Sustain, Strut&Nacelle); Bombardier Learjet 85, Gulfstream G650, KAMOV 226T (helicopter). I’m able to deal with CATIA V4/V5 (including modules: Part Design, Sketcher, Assembly Design,
    CV
    Personal information

    Date of birth

    October, 15th, 1981

    Citizenship status

    Russia

    Potential citizenship

    Bulgaria

    Address

     Moscow, Russia

    Note

    require sponsorship to work in the United States and Canada

              

    Education

    Secondary

    Start / finish

    September 1988 / June 1994

    Name of educational institution

    Secondary school №1of Primorsk

    Faculty

    Deepened study of the ukrainian language

     

    Start / finish

    September 1994 / June 1999

    Name of educational institution

    Regional multiple-discipline ukrainian-bulgarian lyceum of Primorsk

    High

    Start / finish

    September 1999 / February 2006г.

    Name of educational institution

    NationalAerospace Universitynamed after N.E. Zhukovsky "KhAI"

    Faculty

    The faculty of space-rocket techniques

    Speciality

    Aviation and cosmonautics

    Status / qualification

    Master's degree / research engineer

    High

    Start / finish

    October2009 / March 2010.

    Name of educational institution

    The state Academy of preparation of heads and experts of investment sphere GASIS Moscow

    Faculty

    Professional retraining and improvement of professional skill of heads and experts in the field of economy and managements.

    Speciality

    Management and marketing

    Status / qualification

    The expert of management and marketing

    Courses

    Start / finish

    June2010 / September 2010г.

    Name of educational institution

    SEO «Training center A.F.Konto»

    Faculty

    The faculty of accounting and tax assessment

    Speciality

    Accounting and tax assessment

    Status / qualification

    Specialist of accounting and tax assessment

    Courses

    Start / finish

    June2010 / September 2010г.

    Name of educational institution

    SEPO «International Financial Academy»

    Faculty

     Finance

    Speciality

    Financial management

    Status / qualification

     Financial manager

    Courses / trainings

    Start / finish

    September 1994 / June 1999

    Name of educational institution

    Regional multiple-discipline ukrainian-bulgarian lyceum of Primorsk

    Faculty

    Study of foreign languages

    Language

    Bulgarian

    Level

    Base (read / translate with dictionary)

     

    Start / finish

    February 14th 2007 / May 11th 2007

    Name of educational institution

    Dialog - Lingvobusiness, the school of foreign langauges, Moscow, Russia 

    Faculty

    Study of foreign languages

    Language

    English

    Level

    Pre-ntermediate

     

    Start / finish

    September 15th 2007 / December 24th 2007

    Name of educational institution

    British College Of Banking And Finance, Moscow, Russia

    Faculty

    Study of foreign languages

    Language

    English

    Level

    Intermediate

    Courses / trainings

    Start / finish

    April 10th 2008 / July 24th 2008

    Name of educational institution

    Tom's House School, Moscow, Russia

    Faculty

    Study of foreign languages

    Language

    English

    Level

    intermediate (with gradientof upper-intermediate level)

     

    Start / finish

    October13th 2006 / till now.

    Name of educational institution

    Center of the technical education "Boeing-Russia"  

    Faculty

    Increases in the qualification

    Training

    Miscellaneouses courses of increasing engineering qualification CAD / CAM designing and collective work and organization work  process (including Lean Thinking (LT), CMMI)

     

    EXPERIENCE

    Start / finish

    September 2007 / October 2006

    Juridical  name of company

    Antonov Aeronautical Scientist/Technical Complex (Antonov ASTC), Kyiv

    Department / profession

    DD-72, Department of fuselage / design engineer

    Official responsibilities

    • detailed 3D modeling of airplanes parts;

    • positioning and coordination parts in assembly;

    • managing of groups of technicians;

    Got experirence of modeling process organization, position and coordination; also got experience of working in integrate design systems; took participation in design accompaniment during building and testing of parts of airplanes and in development of technical proposition, technical condition, requirements specification, notification of modification design documentations on new and modificated parts of airplanes also.

     

    Start / finish

    October 2006 / Dec 2011

    Juridical  name of company

    The PROGRESSTECH Group of Companies, Moscow

    Department / profession

    2.2.4, Spirit sustaining programs, STRUT / design engineer

    Official responsibilities

    Full-time placement that included investigation, analysis and solution of manufacturing issues while assembling and installing units and structure modules.

    • Problems investigation and prior analysis;

    • Technical documentation development using custom tools;

    • Coordination of a project flow process with the group of design engineers, stress engineers and other responsible members of other company located in the USA;

    • Liaison maintaining while being a representative on the Spirit Aerosystems Co (Wichita, USA);

    • Creating work instructions about optimization of process.

    • Projects: Boeing 737,747-8, 767, 777, 787 (Propalsion Systems, SNCRC Sustain, Strut&Nacelle); Bombardier Learjet 85, Gulfstream G650, KAMOV 226T (helicopter).

    • Experience of direct participation in introduction of systems LEAN (VSM, 5S, TQM).

    - Assist team leader and design team by executing engineering and technical design tasks.
    - Coordinate technical tasks and develop, change and modify CATIA v5 MBDs, IRMs, and ERMs.
    - Conduct IVT sessions and other functions within Catia v5 & Enovia.
    - As part of the team work with designers, engineers and stress team to develop design concepts, mechanical system/ layouts and have experience and knowledge of composite primary and secondary structure.
    - Report daily to the management, customers, team leader and weekly to Engineering Enterprise management on progress made and status to technical assignments and work packages.

     

    Additional information

    Visa

     

    Computer skills

    Advanced user - Windows XP, good knowledge - UNIX.

    Personality

    Logical-Sensory Extratim

    Passions and interests

    Informational and know how (innovation) technology, traveling, sport, music, self-education and self-improving, aviation.

     

     

    Business trips

    1. from 12.01.08 to 12.24.08, USA, Wichita, KS - Spirit Aerosystems  
    2. from 01.12.09 to 02.11.09, USA, Wichita, KS - Spirit Aerosystems
    3. from 05.21.09 to 07.31.09, USA, Wichita, KS - Spirit Aerosystems 
    4. from 08.10.10 to 24.12.10, USA, Wichita, KS - Spirit Aerosystems 

    Recommendation

    Leo Howell, Spirit manager.

         

    PS:

     

    All my responsibilities I can divide into following parts:

    -       Investigation:

    • Full-time placement that included investigation, analysis and solution of manufacturing issues while assembling and installing units and structure modules using REDARS, PSDS, BDMs, PDM, Catia, change requests (CNs, QNs, CARs, EPIs, ELREs, PRRs, etc.).

    • Analysis of the technical task for the project and of labor expenses.

     

    -       Implementation:

    • Creating details, assemblies, installations using Catia V4/V5.

    • Creating drawings.

    • Conduct Full set of technical documentation such as Bill of Material through the life cycle until release, etc.

    .• As part of the team work with designers, engineers and stress team to develop design concepts, mechanical system/ layouts and have experience and knowledge of composite primary and secondary structure.

    • Checking implemented packages.

     

    -       Re-presentation:

    • On-site representation (Wichita, KS): coordinate and facilitate communication between Russian and American design groups. Responsibilities include: Present engineering proposals on manufactory requests for customer review, coordination and approval. Create work statements and establish schedule for the work packages, track the approval process up to release. Getting together new assignments, provide initial investigation and transfer to Moscow team.

    • Taking part in IPT reviews, meeting, teleconferences.

     

    -       Improvement:

    • Development of work process.

    • Organization of development and the development of systematic management on the executing of project (standard works of project).

    • LEAN transformation.

     

    -       Project supporting:

    • Prepare reports and charts on current work process, development and supporting the status table of project.

    • Coordination of a project flow process with the group of design engineers, stress engineers and other responsible members of other company located in the USA

    • Host weekly teleconferences to coordinate activities between Progresstech team and Spirit focal engineer.

    • Production support, develop solutions and presentations on manufactory requests for production and fleet aircrafts. Responsibilities include: documentation update to solve manufacturing and engineering issues, manage bill of material within PDM etc.

    • Control of obtaining initial data of project from the customer, checking urgency for the project, conducting the acquaintance of the engineers of working group with the input information.

    • Quality control of the output documentation of the project.

    • Realizing of the transfer of the output documentation of the project.

    • Conducting the analysis of the observations of customer and organization and if necessary the elimination of these observations.

    • Conducting the analysis of the observations of those revealed with the internal checking and the observations of the customer.

    The projects I’ve took part are:

    1. Boeing:

    -       SNCRC Sustain(that’s mean Strut, Nacelle, & Composite Responsibility Center) – it is Propulsion department of Inlet / Fan Cowl / Thrust Reverser / Strut structure: 737, 747, 747-8F, 767, 777 airplanes. 

    Responsibilities include (not limited):

    • Work with scanned mylar drawings (create ADCNs, transfer mylar to 3D), crate both 2D and 3D digital model within CATIA and bill of material in PDM environment. Bring old structure requirements in compliance with current design practices and technology.

     

    -       787 Pylon Systems & Structure Design:

    • Deliverables include work description, layout, and production data sets using CATIA-v5 CAD systems. Additional responsibilities include coordination with various production and engineering departments on overall design requirements.

    • Develop, change and modify CATIA v5 MBDs, IRMs, ARMs and ERMs.
    • Conduct IVT sessions and other functions within Catia v5 & Enovia.

     

    -       Bombardier Learjet 85:Flight Control Surface Direction_Elevator, Aileron, Rudder.

    • Creating the detail/assy/instl and drafts and corrected some geometry according standards (fasteners locations, edge margin, etc) and engineering requests.

     

    Gulfstream G650:Rib 534, Left hand, Right hand symmetrical.

    • Revising the geometrical parameters of features according change request documents.

     

    -       KAMOV 226T (helicopter): bottom of the cab and middle fuselage.

    • Making changes in the structure of the bottom frame the cockpit and fuselage middle of the Ka-226T using Catia V5 tools.

     

    -       Antonov AN148:

    • Rear baggage hatch construction of AN-148 airplane using CADDS5, Catia V5, AutoCAD, Solidworks systems.

    • Team leading (4 technicians).

     

     

    I’m able to deal with CATIA V4/V5 (including modules: Part Design, Sketcher, Assembly Design, FT&A, Generative Shape Design), Teamcenter PDM, ENOVIA LCA, IVT, FlyThru/EPIC, DIOL, BRIDGE, GD&T and of cource MS Office (including Project, Share Point, etc), UNIX, OS Mac.

    Experience in introduction of LEAN systems (VSM, 5S, TQM, brainstorming).


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2019 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2019 Spacelinks
    Web Analytics