Seeking a challenging and technically oriented position in order to provide diversified instrumentation, calibration, and metrology knowledge and experience to make a positive contribution towards advancement of the company.
Work Summary and Duties
Calibration Engineer - United Space Alliance Shuttle Calibration Lab, KSC, FL 1997- 07/ 2011
Developed, validated, and documented end to end testing processes for mechanical and electromechanical Instrumentation, measuring and test equipment, analytical, safety, diagnostic instruments, transducers, and transmitters.
Evaluated specifications, performed system component research and total design of test process. Initiated procurement of standards with justification, created detailed calibration procedures including pictures, drawings, safety requirements and personal protective equipment. Evaluated test results using statistics and control charts, Assessed downstream impacts of process measurement errors, and out of tolerance conditions. Also determined measurement uncertainty/ reliability, and monitored traceability. Conducted problem solving/ troubleshooting, and continual process improvement. Created work and preventative maintenance instructions and conducted training. Estimated the economics of instrument repair vs replacement. Audited Lab processes for compliance with safety requirements, operating procedures, and quality assurance plan. Advised customers regarding proper use of equipment and new equipment purchases. Provided engineering oversight for precision clean lab operations.
Chemical Waste Handler - United Space Alliance, KSC 2007- 07/2011
Point of contact for the handling/disposal of hazardous wastes generated in the Calibration Lab. Ensured chemicals/ containers were properly labeled and stored. Managed / inspected chemical storage sites and maintained inspection logs, verified chemicals wastes/ containers were properly labeled and disposed of per EPA and DOT regulations. Conducted safety inspections and initiated correction action. Managed POL storage cabinets to maintain compliance with NASA and company safety operating procedures.
Mechanical Calibration Lab Lead – United Space Alliance, KSC 2000 - 2004
Coordinated Lab work scheduling, directed technician’s assignments, and other activities to meet customer needs and comply with company operating procedures. This was in addition to above Calibration Engineering duties.
Calibration Technician – The Bionetics Corp, Shuttle Calibration Lab, KSC 1990 - 1997
Tested and calibrated mechanical and electromechanical measuring and test equipment, performed troubleshooting, and assisted Engineering in procedure development. Majority of work was with flowmeters, pressure gages and transducers, torque, and force.
Instrumentation and Control (I&C) Technician 1985 - 1990
Subcontractor for The Multi-Amp Corp, Dal., Tx in the calibration labs at Crystal River (FL) and Beaver Valley (PA) nuclear power plants. Calibrated a variety of test equipment and process instrumentation as well as developed calibration procedures.
Test Equipment Inventory Controller and Calibration Technician 1983 – 1985
Tracked inventory location of all test equipment at various Multi-Amp jobsites around the country, generated recalibration orders. Also, calibrated and troubleshot test equipment and wrote cal procedures at the Multi-Amp Corp. plant in Dal., TX.
Education Bachelor of Science, Industrial Technology, Ohio University, 1981
Instrumentation Systems (EETC2245) – BCC Institute for Space Technology. 1994
Intro to Statistics (STA2023) - BCC Institute for Space Technology. 1995
Industrial Electronics -Cleveland Institute of Electronics, 1985
Additional Training Flow Measurement by EG&G Flow Technology, 1995
Liquid Flow Measurement /Gas Flow Measurement by Flow Dynamics Co., 1992
Uncertainty Analysis Principles and Methods by Quametec Institute of Measurement Technology, 2008.
Measurement Uncertainty Analysis Using PMAP by Excel Partnership, 2001.
Metcal Procedure Development by The Fluke Corporation, 2007.
Basic and Advanced Metcal Procedure Development by On Time Support, Inc., 2008.
Increasing Personal Effectiveness by Employee Development Systems, Inc., 2010.
Certifications ASQ Certified Calibration Technician, 2010.
Awards/ Recognition Received NASA Space Flight Awareness Honoree, 1996.
Selected to mentor a UCF Engineering coop student.
Skills Well versed in MS Word, Excel, Access, Outlook. Maximo work scheduling software and Fluke Metcal calibration software suite. Participated in LS6 and 5S projects. Also experienced in pc assembly/ repair and possess mechanical aptitude and skills.
Security Clearance NACI Certification (National Agency Check with Inquiries).
References Available Upon Request.
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!
2021 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
|6 months - Silver||1950 euros||convert|
|12 months - Gold||3200 euros||convert|
If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at email@example.com. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing firstname.lastname@example.org. Accounts found not to be in compliance will be deleted.