Latest Space News
Sun, 17 Nov 2019 23:42:07 +0000
Maj. Gen. Stephen Whiting said the transfer of space traffic management responsibilities can't happen until Commerce gets the necessary resources. SpaceNews.com
Fri, 15 Nov 2019 22:36:16 +0000
The 10-year contract is for operations and support of the Advanced Extremely High Frequency, Milstar and Defense Satellite Communications System constellations. SpaceNews.com
Fri, 15 Nov 2019 18:51:17 +0000
Exos Aerospace said the failed launch of a reusable suborbital sounding rocket last month was caused by a structural failure of the rocket shortly after liftoff. SpaceNews.com
Fri, 15 Nov 2019 12:28:02 +0000
NASA’s inspector general warned in a new report that, because of commercial crew delays, utilization of the International Space Station will drop sharply in 2020 and that NASA runs the risk of losing access entirely by next fall. SpaceNews.com
Thu, 14 Nov 2019 23:52:00 +0000
EchoStar has ordered two tiny S-band satellites from Tyvak Nano-Satellite Systems to jumpstart a low-Earth-orbit constellation using spectrum gained through its October acquisition of IoT startup Helios Wire.  SpaceNews.com
Thu, 14 Nov 2019 22:06:27 +0000
NASA paid Boeing nearly $300 million more than originally planned in its commercial crew contract in part because of agency concerns that the company might drop out of the program, a new report claims. SpaceNews.com
Thu, 14 Nov 2019 21:47:58 +0000
SDA is the new term replacing Space Situational Awareness, according to an Oct. 4 memo from Air Force Space Command. SpaceNews.com
Thu, 14 Nov 2019 20:29:46 +0000
Loft Orbital has raised a fresh $13 million to continue development of a constellation of small satellites purpose-built to carry a mix of payloads for customers who don’t want to fly their own satellites.  SpaceNews.com
Thu, 14 Nov 2019 17:19:54 +0000
With growing bipartisan skepticism that NASA’s current plan to return humans to the moon by 2024 is achievable, members of the House Science Committee used a Nov. 13 hearing to advocate for a different, and arguably more conventional, approach. SpaceNews.com
Thu, 14 Nov 2019 12:04:44 +0000
SpaceX successfully tested Nov. 13 the thrusters used as part of the abort system for its Crew Dragon spacecraft, nearly seven months after a similar test resulted in the loss of another spacecraft. SpaceNews.com
Thu, 14 Nov 2019 04:49:10 +0000
The Senate Commerce Committee approved Nov. 13 a NASA authorization bill introduced a week earlier to extend the life of the International Space Station and support other agency programs. SpaceNews.com
Thu, 14 Nov 2019 01:37:18 +0000
Launcher won its first government funding when the U.S. Air Force awarded the the Brooklyn-based startup $1.5 million to accelerate development and testing of its E-2 rocket engine. SpaceNews.com
Wed, 13 Nov 2019 22:52:54 +0000
Chairman Adam Smith said House-Senate divide is deepening over the establishment of a Space Force SpaceNews.com
Wed, 13 Nov 2019 21:01:43 +0000
Mark Rigolle, CEO of LeoSat, told SpaceNews Nov. 13 that the company laid off all 13 employees — himself included — in August after its earlier investors decided not to fund the company any longer.  SpaceNews.com
Wed, 13 Nov 2019 19:41:33 +0000
Isotropic Systems has completed two-way communications tests of its electronically steered antenna using Avanti’s Hylas-4 satellite. SpaceNews.com
Wed, 13 Nov 2019 17:48:11 +0000
In its ongoing quest to increase launch vehicle production, Rocket Lab has unveiled a new industrial robotic system designed to speed up manufacturing of its Electron rocket. SpaceNews.com
Wed, 13 Nov 2019 17:03:25 +0000
The former chairman of the House aviation subcommittee and adviser to United Launch Alliance argues that all commercial spaceflight companies should support, rather than disrupt, the FAA's ongoing effort to streamline existing launch licensing processes. SpaceNews.com
Wed, 13 Nov 2019 12:56:40 +0000
China launches six remote sensing satellites into orbit with two launches inside three hours from sites in north China. SpaceNews.com
Wed, 13 Nov 2019 11:00:40 +0000
A new study says companies can build, launch and operate constellations to gather global imagery with a resolution of one meter for a fraction of the cost of previous constellations. SpaceNews.com
Wed, 13 Nov 2019 10:29:40 +0000
A NASA official warned that extended delays in finalizing a fiscal year 2020 budget for the agency could have implications for its ability to stay on schedule for returning humans to the moon in 2024. SpaceNews.com
More space news...
19506 cvs - 692 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Safety and Mission Assurance Engineer

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:03-02-2012
     Last Modified:03-02-2012 (03:40)
    Job information
     Current job:Safety and Mission Assurance Engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:immediately
     Industry:
     KeywordsIn space industry for 25+ years. Very familiar with NASA requirements. Supported Space Shuttle Program
    CV

    U.S. Citizen

     

    Professional Experience:

     

    • 25+ Years of experience in Safety and Mission Assurance (S&MA) that include

    Quality Assurance, Quality Engineering, Configuration Control, Product Safety, Reliability, and Maintainability functions.

     

    Experience includes:

     

    • Design and Implemented project base S&MA architect that provides cost effective system, consistency in quality approach without jeopardizing the quality and safety of the deliverables.

     

    • Quality Inspection, Quality Engineering, Procurement Quality Engineering, Receiving Inspection, Design Analysis, Reliability Assurance, Safety Engineering (Hazard Analysis), Failure Modes and Effects Analysis (FMEA), Critical Item List (CIL), and Interface Control Documents (ICD).

     

    • Design and implement Nondestructive Examination / Nondestructive Inspection (NDE/ NDI) and Welding procedure to maintain certification to American Society of Non-Destructive Testing (ASNT) and NASA 410.

     

    • Configuration Management of more than 500K procured parts for External Tank (used for Space Shuttle Program).

     

    • Establish and maintain as designed, as planned and as built data system.

     

     

    Trained in ISO 9000, AS9100 requirements, Six Sigma principles, Earned Value Management (EVM), Kaizen – Value Stream Mapping (VSM) activities and lean manufacturing.

     

    Represented Lockheed Martin as a charter member of NASA Process Control Focus Group for Space Shuttle Program.

     

    7 Years of experience in Manufacturing Engineering Function.

     

     

    Education:              BS Mechanical Engineering    (May 1972)

     

     

     

    Work Experience:

     

    Company:    Jacobs Technology          From: February 2005 to Present

     

    Aerospace contractor for NASA Johnson Space Center (JSC) facility operation and flight productssupporting Space Shuttle Project.

     

    • From:        June 2011 to Present

                           

    ·Function:            S&MA   Chief Engineer                 

     

                Responsibilities:

     

    • Provide technical guidance to all disciplines of S&MA.
    • Provide technical requirements and guidance to new projects.
    • Collaborate with the customer and establish critical quality

    Requirements.

    • Review technical requirements of projects and provide S&MA inputs that includes cost and requirements.
    • Collaborate with engineering discipline and the customer for anomaly resolution, failure Investigations and analysis, determining root cause and establishing corrective actions.
    • Implement, maintain and provide technical guidance for NDE/NDI and weld processes and requirements.

     

    • From:        September 2008 to June 2011

     

    ·Function:           Manager,

     

    Operations Planning and Controls

     

    S&MA Chief Engineer Welding and Nondestructive Testing /Inspection    

     

    Responsibilities:

                           

    • Provide technical support to all new projects.
    • Coordinate and identify S&MA requirements.
    • Coordinate SE & I requirements with Asset Management and S&MA.
    • Plan resources to support new projects and maintain department budget.
    • Implement, maintain and provide technical guidance for NDE/NDI and weld processes and requirements.

     

    From:        Feb. 2006 to Aug.  2008

     

    ·Function:           Manager,

     

    Quality Engineering, Quality Assurance,

    Procurement Quality, Receiving Inspection, Electrical, Electronic, Electromechanical (EEE) parts and analysis  and Government Industry Data Exchange Program (GIDEP)                                            

     

    Responsibilities:     

     

    • Design, Develop, Implement and Manage activities of Quality Assurance functions in an efficient, disciplined and cost effective manner.

     

    From:        Feb. 2005 through Feb. 2006

               

    ·Function:            Manager,

     

    Configuration & Data Management (Facility and Flight Product)

     

    Responsibilities:     

     

    • Design, Implement and manage the activities of Configuration & Data Management functions in an efficient, disciplined and cost effective manner.
    • Maintain facility configuration of more than 50 different facilities at NASA Johnson Space System (JSC).

     

     

    Company:    Lockheed Martin Space Systems Company, Michoud Operations                     

     

    From: February 1981 to February 2005

     

     Contractor for fabrication, assembly and test of External Tank for Space Shuttle.

     

    From:                    3- 95 through Feb. 2005

     

                                                               

    ØFunction:       Senior Manager,      Procurement Quality Engineering

     

    Responsibilities:           

     

    • Manage procurement engineering of more than 500 K parts for External Tank for Space shuttle Program.
    • Assure that each product is fabricated and tested to current design requirements and configuration control is maintained.
    • Manage the activities of Procurement Engineering supporting product assurance in assuring all design requirements are complied with and process control is maintained throughout the fabrication and test phase.
    • Establish and maintain the system that facilitated reconciliation of all products from as-designed, as planned and as built.

     

     

    From:        1-93 through 2-95

                                                                           

    ØFunction:       Chief  ,           Problem Analysis & Assessment

     

    Responsibilities:           

     

    • Resolution of In-Flight Anomalies (IFA), Post Flight Analysis, Flight Readiness Review, Material Review Board, and Supplier Corrective Action.
    • Analyzed and coordinated resolution to Repetitive Nonconformance Analysis and the ALERT.

     

     

     

    From:       3-90 through 1-93

               

    ØFunction:      Staff ,  Quality & Reliability Assurance Engineer

     

    Responsibilities:           

     

    • Design analysis of External Tank hardware.
    • Coordinate integration of Loads, Thermal, Structure, Grounding for electrical systems with manufacturing and quality inspection, providing technical assistance and participating in testing all electrical systems tests that satisfies End Item Specification (EIS) and requirements.
    • Support for resolution of technical problems and implementation of new Reliability Assurance systems that included close loop system verification of FMEA, CIL & Hazards.

     

    From:              2-85 through 3-90

               

    ØFunction:      Group Leader ,         Quality Assurance Engineering

     

    Responsibilities:           

     

    • Investigate solve and coordinate engineering related issues, coordinate System Engineering and Integration (SE & I) requirements with Manufacturing (Welding, Mechanical Installation, Electrical fabrication, installation and test, Thermal Protection System (TPS) application and Test). 
    • Collaborate with test engineers in testing of External Tank that included Hydro Test of Liquid Oxygen (Lox) Tank, Pneumatic Testing of Liquid Hydrogen (LH2) Test including loading in X-Y-Z Direction, Testing of electrical harnesses and testing all system test utilizing fact analyzer.
    • Collaborate with manufacturing and quality inspection to assure tank and component cleanliness including Liquid Oxygen (Lox) Compatibility, and maintain clean after fabrication of External Tank.
    • Testing of Thermal Protection System (TPS)

     

    From:                    2-81 through 2-85

               

    ØFunction:       Quality Assurance Engineering

     

     

    Responsibilities:   

     

    • Perform Quality engineering functions related to review of engineering drawings to assure compliance to Product Assurance and customer requirements. 
    • Perform Quality Engineering/Planning functions related to review of

    Manufacturing Process plans to assure compliance with

    engineering requirements & insertion of inspection requirements.

     

     

    Following responsibilities were in addition to Quality Control Manager (1977 through 1981) for Chemetron and Buckeye Fire Systems Philadelphia and North Carolina respectively.

     

    Other Qualifications:

     

    • Industrial Engineering, Plant Lay out & Time & Motion Study (1977 through 1978), Machine shop Supervisor with Chemetron fire Systems and Buckeye fire Systems (1977 through 1981), Manufacturing Engineering Manager with Buckeye Fire Equipment (1980 through 1981).      

    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2019 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2019 Spacelinks
    Web Analytics