Latest Space News
Fri, 23 Feb 2018 21:31:50 +0000
With few new missions in development, NASA's Mars Exploration Program is shifting towards operations of ongoing missions as well as technology development to support an eventual sample return effort. SpaceNews.com
Fri, 23 Feb 2018 17:53:13 +0000
The Ariane 5 rocket that deviated from its expected flight path Jan. 25 and lost contact with ground control was fed the wrong coordinates, according to the independent commission Arianespace tasked last month to find out what caused the close call. SpaceNews.com
Fri, 23 Feb 2018 01:56:04 +0000
York Space Systems, a Denver startup preparing to mass manufacture small satellites, has completed a key technical review, clearing the way for the November launch of its Harbinger mission. SpaceNews.com
Fri, 23 Feb 2018 00:59:25 +0000
The Air Force Space and Missile Systems Center is leading a sweeping review of how the military acquires technologies. SpaceNews.com
Fri, 23 Feb 2018 00:21:27 +0000
If all goes as planned, NASA’s campaign to pinpoint sources and sinks of atmospheric carbon dioxide will get a major boost early next year with the launch of the Orbiting Carbon Observatory-3, a leftover satellite instrument modified to attach to the International Space Station. OCO-3 is an important precursor to the more ambitious Geostationary Carbon […] SpaceNews.com
Thu, 22 Feb 2018 22:13:45 +0000
NASA's fiscal year 2019 proposal will likely set up another showdown between NASA and Congress regarding the Europa Clipper mission, debating not only when to launch the spacecraft but also how. SpaceNews.com
Thu, 22 Feb 2018 21:20:35 +0000
U.S. Air Force Brig. Gen. Wayne Monteith is a military officer who speaks with the enthusiasm of a startup CEO. “When people say the space business is down, they’re not spending much time down here where I have four launches in a month,” he commented. SpaceNews.com
Thu, 22 Feb 2018 19:35:51 +0000
Air Force leaders are warning the younger generations of airmen to not assume they will have access to GPS or satellite communications. SpaceNews.com
Thu, 22 Feb 2018 16:45:30 +0000
SpaceX on Feb. 22 launched Falcon 9 rocket carrying a Spanish-owned radar-imaging satellite and two demonstration satellites for SpaceX's proposed broadband Starlink broadband constellation.The 9:17 a.m. Eastern launch from Vandenberg Air Force Base in California carried all three spacecraft to low Earth orbit, deploying the PAZ radar satellite 11 minutes after liftoff. SpaceNews.com
Thu, 22 Feb 2018 10:17:21 +0000
A discussion of China at the latest National Space Council meeting took a more nuanced view of the country than is typical in such conversations, seeing the rising space power as a competitor and adversary but also a potential partner. SpaceNews.com
Wed, 21 Feb 2018 23:17:17 +0000
The Army would use small satellites to support tactical imagery needs in the field. SpaceNews.com
Wed, 21 Feb 2018 21:41:25 +0000
Companies that collect data beamed down from small satellites say they expect partnerships and mergers will stem the rising number of new entrants offering ground station services in their market. SpaceNews.com
Wed, 21 Feb 2018 19:46:33 +0000
Vice President Mike Pence and members of the National Space Council approved a series of recommendations Feb. 21 that make modest, and expected, reforms to regulations of commercial space activities. SpaceNews.com
Wed, 21 Feb 2018 17:18:00 +0000
Just as the European masters brought forth a magical period of learning, discovery, invention, fine arts and music 500 years ago, with the advances in the science and technologies proliferating today, we expect a rejuvenation in human space activity in this dawn of the 21st century. SpaceNews.com
Wed, 21 Feb 2018 17:04:37 +0000
For those who have been waiting for the Air Force to shake up its space investment portfolio, the budget request for 2019 was as disruptive as can be expected from the military. SpaceNews.com
Wed, 21 Feb 2018 16:59:51 +0000
The biggest thing since sliced bread might just be a satellite the size of a slice of bread. SpaceNews.com
Wed, 21 Feb 2018 11:23:25 +0000
NASA's vision for lunar exploration includes landing astronauts, from NASA and its partners, on the surface of the moon by the late 2020s, the agency's acting administrator said Feb. 20. SpaceNews.com
Wed, 21 Feb 2018 04:29:31 +0000
In spite of all the safeguards, companies must continually monitor traffic on their global networks to detect attempted or successful penetration and take steps to mitigate the impact of security breaches. SpaceNews.com
Tue, 20 Feb 2018 22:02:12 +0000
Bigelow Aerospace has established a space operations subsidiary whose first task will be to study the market for the company's commercial space stations as it grapples with competition from China and NASA. SpaceNews.com
Tue, 20 Feb 2018 19:50:53 +0000
President Trump's 2019 NASA budget would pull the plug on astronomer's No. 1 priority for the next decade. NASA's former astrophysics chief says Congress should keep WFIRST funded. SpaceNews.com
More space news...
18431 cvs - 1036 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Mechanical Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:17-06-2012
     Last Modified:17-06-2012 (02:36)
    Job information
     Current job:Mechanical Engineer
     Employment Term:Either
     Job location:Anywhere
     Date available:immediately
     Industry:
     Keywords
    CV

    A result oriented Mechanical Engineer with 3.5+ years of professional and academic experience, who is self motivated for continued learning of new technologies and apply skills to anticipate and solve design & development challenges.

     

    IT PROFICIENCY:

    Ø  CAE – ANSYS- Workbench (FLUENT, CFX), ANSYS-FEA, GAMBIT, ICEM.

    Ø  CAD Software- PRO-E, Solid Works, Autodesk-Inventor

    Ø  Project Management – Primavera, MS Projects

    Ø  Others – MS Office, Windows, Linux, MATLAB

     

    EDUCATIONAL BACKGROUND:

    1.  Sept. 2010 - Sept. 2011

    The University of Sheffield, UK

    MSc. Adv. Mechanical Engineering with Merit

    Modules:   Computational Fluid Dynamics (CFD), Aerodynamics, Aero-structures & Aircraft Systems, Technology Strategy & Business Planning, Condition Monitoring.

     

    Research Project:

    “Effect of Transition Model on Numerical Simulation of Unmanned Combat Air Vehicle (UCAV) Pitch Divergence.”

     

    External aerodynamics and pitch divergence phenomenon associated with UCAV-1303 design has been analysed under this project. CFD simulation methodology using Turbulence and transition modelling has been developed under this research.

    Ø  Reynolds-Averaged Navier–Stokes turbulence and transition modelling was carried out to analyse aerodynamics associated with aircraft exterior designs.

    Ø  3-D geometry creation, High fidelity 3-D Structured Computation Grid was generated by ANSYS- GAMBIT. CFD simulation is been carried out using ANSYS-FLUENT.

    Ø  Validated CFD results with Wind Tunnel experimental results to optimise design and CFD simulation process.

    Ø  Secured Distinction in research work.

     

     Group Project:

    “CFD Simulation for Wind Farm Siting in Complex Terrain”

     

    CFD Methodology for Turbulence modelling for aerodynamics associated with wind farm siting at complex terrain has been developed under this project. ‘WindSim’ commercial software was studied to simulate this real world problem to finalise wind turbine locations in order to maximise turbine efficiency.

     

    2.  Jul. 2004 - May. 2008

    The University of Pune, India

    B.Eng. Production Engineering with Merit

    Main Modules:, Thermo & Fluid mechanics, Manufacturing processes, Operational research, Metallurgy, Material forming, Machine design, Reliability, Robotics.

     

    Academic Project:

    “Performance Evaluation of Boiler Tube Configuration for Enhanced Heat Transfer using CFD Techniques”

    This project has been completed at Thermax India Ltd, India. Thermax India Ltd is leader in Boiler and HVAC industry.  The key objective of this project was redesigning of Bobcock & Wilcox (B&W)boiler in order to optimise heat transfer efficiency using CFD technique.

    Ø  I developed boiler tube configurations using Pro-E Wild fire 3.0 which further discretised using 3-D Hybrid mesh with commercial software ANSYS-ICEM.

    Ø  Laminar and Turbulence CFD simulation of boiler tube configurations is performed to analyse Heat transfer. Commercial software ANSYS-CFX is used for this research.

    Ø  Results verified with experiments carried out in the laboratory.

     

    EMPLOYMENT HISTORY:

    1.  January 2012 –  June 2012

    SEaB Energy Ltd

    Design & Development Engineer

     

    SEaB Energy Ltd. works in Renewable Energy sector for Anaerobic Digestion System. I worked as a Design and Development Engineer managing design and R&D activities. My responsibilities include:

    Ø  R&D activities including CAE analysis for anaerobic digestion system multi phase fluid, fluid control equipments, FEA analysis of tanks and structures.

    Ø  Development of technical specifications & design documents including GA drawings, P & IDs, detailed engineering drawings, drawings for manufacturing.

    Ø  Documentation and product development activities.

     

    2.  June 2008 – Aug. 2010

    Vulcan Engineers Ltd, India

    Project Design Engineer

     

    Vulcan Engineers Ltd. is owned by an Italian group – Terruzzi Fercalx SPA. I worked as a Project Engineer managing design and manufacturing activities involved in Lime Kiln, & Autoclave Turn-Key projects. My responsibilities include:

     

    Ø Development of technical specifications & quality management program to ensure quality and efficiency of the product. I developed PFD, GA and detailed engineering drawings for manufacturing of wide range of products such as hydraulic & pneumatic systems, conveyor systems, centrifugal fans, air-condition & ventilation, bag filters etc.

    Ø Thermal analysis of refractory lining & insulating materials and thermal power management of the plant.

    Ø  Tools & Techniques used are MRP, Six Sigma tools, CPM, Primavera, Auto-CAD, FMEA techniques, ASME Code, ISO 9001:2000, ISO 16000.

     

    3.  June. 2007- Apr. 2008

    Thermax India Ltd. India

    Design Engineering Trainee

      

    I worked as a part of an Innovation & New Product Development Team during Industry year responsible for redesigning of B&W boilers for industrial and commercial applications. My responsibilities as an intern included:

     

    Ø  Design and development of bespoke products in boiler industry, CFD and FEA simulation of newly developed boiler systems and structures to analyse for heat transfer, resolving fluid flow issues & structural analysis of B&W boilers.

    Ø  Tetra, Hexa and prism meshing of Fluidised Bed Combustor Boiler designs, Simulation result analysis for the same  using PRO-E, ANSYS-ICEM, ANSYS-CFX.

    Ø  Preparation of detailed technical reports & documentations.

     

    SKILLS PROFILE:

    Project Management: At Vulcan I worked on multiple projects simultaneously by prioritising my tasks to meet project deadlines.

     

    Team Working: I have worked as part of professional & academic multinational teams and learnt to communicate effectively & adapt working style to meet the team goals.

     

    Problem Solving & Quick Learning: At Thermax, I redesigned boilers assessing cost benefits and manufacturing feasibility with product features as desired by customer. I have also worked on numerous product selection programs for Lime Kiln showing flexibility to work in any environment and adopting to the new environment quickly.

     

    Communication: I consistently liaised and negotiated with customer, vendors and company’s management for problem assessment, redesigning & technical assessment the product & project execution respectively.

     

    REFERENCES:

    Will be provided on request.


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics