Latest Space News
Fri, 23 Feb 2018 21:31:50 +0000
With few new missions in development, NASA's Mars Exploration Program is shifting towards operations of ongoing missions as well as technology development to support an eventual sample return effort. SpaceNews.com
Fri, 23 Feb 2018 17:53:13 +0000
The Ariane 5 rocket that deviated from its expected flight path Jan. 25 and lost contact with ground control was fed the wrong coordinates, according to the independent commission Arianespace tasked last month to find out what caused the close call. SpaceNews.com
Fri, 23 Feb 2018 01:56:04 +0000
York Space Systems, a Denver startup preparing to mass manufacture small satellites, has completed a key technical review, clearing the way for the November launch of its Harbinger mission. SpaceNews.com
Fri, 23 Feb 2018 00:59:25 +0000
The Air Force Space and Missile Systems Center is leading a sweeping review of how the military acquires technologies. SpaceNews.com
Fri, 23 Feb 2018 00:21:27 +0000
If all goes as planned, NASA’s campaign to pinpoint sources and sinks of atmospheric carbon dioxide will get a major boost early next year with the launch of the Orbiting Carbon Observatory-3, a leftover satellite instrument modified to attach to the International Space Station. OCO-3 is an important precursor to the more ambitious Geostationary Carbon […] SpaceNews.com
Thu, 22 Feb 2018 22:13:45 +0000
NASA's fiscal year 2019 proposal will likely set up another showdown between NASA and Congress regarding the Europa Clipper mission, debating not only when to launch the spacecraft but also how. SpaceNews.com
Thu, 22 Feb 2018 21:20:35 +0000
U.S. Air Force Brig. Gen. Wayne Monteith is a military officer who speaks with the enthusiasm of a startup CEO. “When people say the space business is down, they’re not spending much time down here where I have four launches in a month,” he commented. SpaceNews.com
Thu, 22 Feb 2018 19:35:51 +0000
Air Force leaders are warning the younger generations of airmen to not assume they will have access to GPS or satellite communications. SpaceNews.com
Thu, 22 Feb 2018 16:45:30 +0000
SpaceX on Feb. 22 launched Falcon 9 rocket carrying a Spanish-owned radar-imaging satellite and two demonstration satellites for SpaceX's proposed broadband Starlink broadband constellation.The 9:17 a.m. Eastern launch from Vandenberg Air Force Base in California carried all three spacecraft to low Earth orbit, deploying the PAZ radar satellite 11 minutes after liftoff. SpaceNews.com
Thu, 22 Feb 2018 10:17:21 +0000
A discussion of China at the latest National Space Council meeting took a more nuanced view of the country than is typical in such conversations, seeing the rising space power as a competitor and adversary but also a potential partner. SpaceNews.com
Wed, 21 Feb 2018 23:17:17 +0000
The Army would use small satellites to support tactical imagery needs in the field. SpaceNews.com
Wed, 21 Feb 2018 21:41:25 +0000
Companies that collect data beamed down from small satellites say they expect partnerships and mergers will stem the rising number of new entrants offering ground station services in their market. SpaceNews.com
Wed, 21 Feb 2018 19:46:33 +0000
Vice President Mike Pence and members of the National Space Council approved a series of recommendations Feb. 21 that make modest, and expected, reforms to regulations of commercial space activities. SpaceNews.com
Wed, 21 Feb 2018 17:18:00 +0000
Just as the European masters brought forth a magical period of learning, discovery, invention, fine arts and music 500 years ago, with the advances in the science and technologies proliferating today, we expect a rejuvenation in human space activity in this dawn of the 21st century. SpaceNews.com
Wed, 21 Feb 2018 17:04:37 +0000
For those who have been waiting for the Air Force to shake up its space investment portfolio, the budget request for 2019 was as disruptive as can be expected from the military. SpaceNews.com
Wed, 21 Feb 2018 16:59:51 +0000
The biggest thing since sliced bread might just be a satellite the size of a slice of bread. SpaceNews.com
Wed, 21 Feb 2018 11:23:25 +0000
NASA's vision for lunar exploration includes landing astronauts, from NASA and its partners, on the surface of the moon by the late 2020s, the agency's acting administrator said Feb. 20. SpaceNews.com
Wed, 21 Feb 2018 04:29:31 +0000
In spite of all the safeguards, companies must continually monitor traffic on their global networks to detect attempted or successful penetration and take steps to mitigate the impact of security breaches. SpaceNews.com
Tue, 20 Feb 2018 22:02:12 +0000
Bigelow Aerospace has established a space operations subsidiary whose first task will be to study the market for the company's commercial space stations as it grapples with competition from China and NASA. SpaceNews.com
Tue, 20 Feb 2018 19:50:53 +0000
President Trump's 2019 NASA budget would pull the plug on astronomer's No. 1 priority for the next decade. NASA's former astrophysics chief says Congress should keep WFIRST funded. SpaceNews.com
More space news...
18431 cvs - 1036 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Pre-doctoral researcher

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:28-06-2012
     Last Modified:29-06-2012 (08:47)
    Job information
     Current job:Pre-doctoral researcher
     Employment Term:Temp/Contract
     Job location:Anywhere
     Date available:within a month
     Industry:Satellite Manufacturers and Subcontractors, , , Launch Systems
     KeywordsFPGA, PCB design, Artificial intelligence, VHDL
    CV


    Objectives

    Hardware engineer, FPGA designer, Electrical Engineer. Open for related positions.

     

    Profile

    I received a Diploma of Engineer in Computers, Computing Complexes and Systems, Networks from Moscow Aviation Institute (State University of Aerospace Technologies), Moscow, Russia and Diploma in Theory and Practice of Translation (Languages: English, Russian) from Institute of Foreign Languages of Moscow Aviation Institute. Over the past few years I have acquired a lot of practical skillscontributing few National and European projects, mostly dedicated to hardware development for control systems in National Space Industry. The key strengths that I possess include, but are not limited to more than 2-years practical experience in implementation of control system applications and my striving for continued excellence. I am a good team player and I like to get at the root of problems. The projects that I have participated were of control system applications, smart systems, sensors and signal processing algorithms. I also participated in international evaluation campaigns. Besides, the experiences from studying and working in Russia, The US and The Netherlands have expanded my knowledge of different cultures and languages.

    Education

    2012 – Present Pre-doctoral researcher in Smart systems and hardware intelligent algorithms (INCAS3, The Netherlands)

    2005 – 2011  Diploma of Engineer in Computers, Computing Complexes and Systems, Networks (Moscow Aviation Institute)

    2007 – 2010  Diploma of Linguist-Translator in Theory and Practice of Translation (Moscow Aviation Institute)


     

    Business Roles

    • Pre-doctoral Researcher
    • Electronics Engineer
    • Hardware Design Engineer

     

    Knowledge survey

    Programming Languages

    Verilog;VHDL, SystemC; C; C++, Assembler.

    Operating Systems

    Windows XP Professional, 7 Professional; Linux.
     

    Methods

    Optimization algorithms, digital signal processing, neural network signal processing, SW/ HW co-design, mixed analog-digital design, data protocol design, register-level programming.

    Knowledge survey

    FPGAs; Verilog programming; Hardware neural networks; mixed signal designing; PCB schematic design; PCB lay-out; Block diagram designing; creation of specifications; control-testing algorithms designing; algorithms modeling; Technical and Fundamental Analyses of hardware design; Digital Signal Processing Design, Techniques, and Theory;.

     

    Applications and Tools

    Cadence design tools (Orcad Pspice, Librarian, Design Entry HDL, PCB editor);P-CAD; Autocad;Actel Libero IDE;ModelSim; QuestaSim; Xilinx ISE; Quartus II; Cadence RTL compiler; Multisim; MathCad;MATLAB; MS Office; Visio.

     

    Language

                                            Speak           Write            Read

           Russian                      native             native             native

           English                       fluent             fluent             fluent

           Dutch                         poor(learning)poor(learning)poor(learning)

           German                      poor               poor               poor

     

     

    Project Descriptions

    Period                      :2-2012  -  Present

    Title                          : Hardware neural networks.

    Partners                   :INCAS3, The Netherlands, Assen

    Role                          : Pre-doctoral researcher

    Domain                     :Smart sensor systems

    Objective                 :to study the possible applications of neural networks and adaptive algorithms for sensor systems and future possibility of realization on reconfigurable hardware such as FPGA  .

     

    Description

    This program aims at studying the kinds of algorithms based on neural networks which can require to be implemented in parallel for realizing full potential and computation power of parallel neural networks.  


    Examples of research questions that fall within this category are: (1) Real-time signal processing, (2) Sound sensory system for abnormal data extraction based on hardware (FPGA) neural networks, (3) “Real-time neuromorphic hardware. Thalamo cortical architecture on FPGA for auditory purposes, (4) Neural network for blind source separation based on hardware, (5) Adaptive context-independent hardware sensor system based on neural networks.



    Tasks and activities

    My task was to develop an overview possible nowadays technologies and proposal of the best solutions concerning sensors and sensor systems and, finally, to simulate and implement one of the algorithms for FPGA.  This work contributes an approach for smart signal processing. The approach is novel, it exploits new types of FPGAs and artificial neural networks adopted for hardware.

     

    Results

    I created a complete overview for recent technologies which showed the possibility of optimal implementation neural network on FPGAs and wrote a proposal with the main applications which can be used in INCAS3.  I simulated and tested the Radial basis function neural network, including simulation in MATLAB and then in Modalism, the module is prepared to be implemented for any types of FPGAs.

     

     

    Applied methods, techniques, tools and hardware

     

    Programming Languages    :   M-code;Verilog.

    Operating Systems              :   Windows 7.

    Methods                               :   Register level programming, testbenches.

    Applications and Tools        :   Matlab, ModelSim.

     

     

     

     

    Period                      :4-2011  -  1-2012

    Title                          : Luna-Glob mission

    Partners                   :Scientific technical innovation center “TECHCOM”, Moscow, Russia

    Role                          : Electronics Engineer

    Domain                     :On-board digital computing machine

    Objective                 :Designing FPGAs and PCB layout for on-board digital computing machine

     

    Description:

    The goal of the project was to create on-board digital computing machine for Luna-Glob mission. Luna-Glob mission is a project of researching the moon by launching a satellite there and landing there alunar rover.  The digital computing machine must give instructions to interface adapters and receive digital information from them.

     

    The project considered both creating and improving previous algorithms and data protocols as controlling the spacecraft. Also creating robust FPGA algorithms and electronics included in the machine

     

    Tasks and activities

    In this project I took a role of an Electronics Engineer. I was designing FPGAs and digital and analog hardware as well, created PCB schematic and PCB layout. Also I verified the machine using lab instrumentation. Also in my responsibilities there were included preparing and maintaining specifications.

     

    ResultsI implemented a memory controller and controller of inter-machines interface also improved the communication between modules in machine on FPGA whcich I sped up in 8 times. I verified the project by writing test benches. Also I designed several circuits for matching elements and realized them on PCBs. I tested them by lab instrumentations (Oscillator, Multimetr).

    During this project I gained a lot of practical experience in FPGA (Verilog) programming, PCB schematic and layout  and got some knowledge in design of embedded microprocessors such as 8051 core and Leon 3FT. The project is based on FPGAs from Actel.

     

    Applied methods, techniques, tools and hardware

     

    Programming Languages    :   Verilog, SystemC

    Operating Systems              :   Windows 7.

    Applications and Tools        :   Actel Libero IDE, ModelSim, QuestaSim, Cadence (allegro) design toools

    Algorithms and protocols    :   Analog Design (DC-DC chips, op amps, transistors, etc); Digital Signal Processing Design, Techniques, and Theory;

                                                      Various hardware protocols: SPI, RS232, MIL-STD-1553-Betc; Robust algorithms, redundancy algorithms (Hamming code)

     


    Period                      :           9-2010  -  4-2011

    Title                          :“Phobos-Ground” mission

    Partners                   :Scientific technical innovation center “TECHCOM”, Moscow, Russia

    Role                          :Electronics Engineer

    Domain                     :Control system of “Phobos-Ground” mission

    Objective                 :Designing interface adapters which

     

    Description:

    The goal of the project was to create a control system for “Phobos-ground” mission which provide al control signals from launching to landing in Phobos. This project should have researched the surface of Phobos and return samples of ground.  The interface adapters must convert instructions of digital computing machine to devices such as valves, detectors, sensors etc. and back to the computing machines.

     

    The project considered both creating and improving signal processing algorithms and data protocols on FPGAs

     

    Tasks and activities

    In this project I took a role of an Electronics Engineer. I was designing FPGAs (robust signal processing algorithms and protocols. Also I verified the FPGAs by writing testbenches. Also in my responsibilities there were included preparing and maintaining specifications and developing solutions to meet these specifications.I significantly extended my knowledge of algorithms and data structures, as well as my programmer skills.

     

    Results

    I implemented a few FPGAs working for control of valves, changing an angle of antenna, communication protocols for detectors, ADC, DAC, digital thermometer. I verified the project by writing test benches.  During this project I gained a lot of practical experience in FPGA (Verilog) programming, data protocols and digital signal processing

     

    Applied methods, techniques, tools and hardware

     

    Programming Languages    :   Verilog, C/C++.

    Operating Systems              :   Windows XP.

    Applications and Tools        :   Digital Signal Processing Design, Techniques, and Theory;

                                                      Various hardware protocols: SPI, RS232, Manchester code, SpaceWire; Military standards.

     

     


    Period                      :9-2009  -  4-2011

    Title                          :Communication satellite Yamal 300K

    Partners                   :Centre of innovation researches and developments, Federal State Research Institute “Argon”, Moscow, Russia

    Role                          :Engineer Designer

    Domain                     :Interface unit

    Objective                 :PCB designing of interface unit modules

     

    Description:

    The interface unit of communication satellite Yamal 300K is designed for linking to control blocks as well as to provide computation possibility and digital signal processing.

    The focus was to development of new device which combined the computation power of digital computing machine and interface adapters.

     

    Tasks and activities

    My role was to perform a complete PCB design and then to test the electronics after manufacturing the device. The design cycle included creating the library of eclectronic components (circuits), to model electronic scheme in MultiSim, and then to create n schematic design and complete PCB design. Using lab instruments to test done product. As well as PCB design I was responsible to count the reliability of the device, electrical characteristics and radiation tolerance in theoretical way. During the projects ihad to work with radiation tolerant components meeting military requirements

     

    Results

    On the project I created six of ten modules and successfully tested them as well. During the project I got a great experience in analog and digital designing, simulation as well as learned two design packages for PCB design. I also gain a lot of theoretical knowledge in electronics and electrotechniks and radition aspects which could effect on the correct work of device.

     

     

    Applied methods, techniques, tools and hardware

     

    Operating Systems              :   Windows XP Professional

    Skills                                    :   Analog Design (DC-DC chips, op amps, transistors, etc); radiation tolerance counting; counting of reliability.

    Applications and Tools        :   Cadence design tools (Orcad Pspice, Librarian, Design Entry HDL, PCB editor),P-CAD, Autocad, MultiSim.

     


    Period:           1-2010  - 3-2011

    Title                          :Development of the module simulator of external relations for checkout equipment adapter interface on FPGA from Actel Company.

    Partners                   :Moscow Aviation Institute (State University of Aerospace Technologies), Moscow, Russia and Centre of innovation researches and developments, Federal State Research Institute “Argon”, Moscow, Russia

    Role                          :Student

    Domain                     :Computers, Computing Complexes and Systems, Networks

    Objective                 :Development of the module which provide the computation power for control checking hardware.

     

    Description:

    Devices designed in the aerospace industry must have guarantees of efficiency. There is a need to check them on the Earth. For this purpose developed control-checking test equipment (CCTE) is designed for automatic control performance of the object and measuring its parameters in the manufacture, testing and maintenance. CCTE should allow not only to carry out the control of individual devices, the adapter interface (AI) at the incoming inspection, acceptance, preliminary and periodic testing, but also to provide emulation of the on-board equipment when working with interface devices. AI provides a computational resource for solving tasks of controlling an engine system, information exchange devices, instruments and sensors.

     

    Tasks and activities

    In the Diploma project it was developed a module of simulator for AI. A simulator is a compact device that can easily dock with AI and be placed in the same space with the AI during the thermal, thermal vacuum, and other types of tests. The developed module of the simulator combines all the necessary means for testing AI and based on FPGA.

    FPGA consists of the following blocks:

    1) The controller of commands designed to receive the command of words, words of data from an on-board digital computer and issuing the response data words and status;

    2) A programmable memory controller (EEPROM) to implement the SPI-interface of a EEPROM chip. EEPROM is used to determine the rate of exchange on RS232 and to keep some data;

    3) The controller WIRE is an implementation of 1-WIRE interface of digital temperature sensor.

    4) Code Wagner Transmitter designed for creation data packets from the data buffer to the serial interface. It is used to verify operation of the code Wagner receiver, implemented in AI;

    5) Wagner code receiver designed to receive data via the serial interface and recording the results of the reception, as well as to control the buffer of received packets. It is designed for in-device-testing of the Wagner transmitter module;

    6) The switch controller which provides the control of keys;

    7) Telemetry controller designed to receive power states of devices, electro-pneumatic valves, relays and commands sent by AI.

     

    Results

    Each controller is implemented using hardware description language Verilog on ProAsic3 from

    Actel. Also analogue matching elements were developed. In the work Schematic and PCB designs are done. The proposal of the work was published in the Journal was presented on the conference (see next).

    Applied methods, techniques, tools and hardware

     

    Programming Languages    :   Verilog

    Operating Systems              :   Windows 7.

    Applications and Tools        :   P-CAD, Actel Libero IDE, Visio.

    Miscellaneous

    Invited talks

    • December 2010 “Features of translation from English to Russian and back in manufacturing of aircrafts” at conference organized by Russian Aircraft Corporation “MIG” and Moscow Aviation Institute (Russia, Moscow);
    • September 2010 “Modern technologies of control systems, automatics and information processing”,(Alushta, Russia)

     

    Publications:

     

    September 2010

    Magazine: “Modern technologies of control systems, automatics and information processing”.

    Transactions of 19th international scientific and technical workshop.

    Topic: “Design of control-checking hardware on the base of programmable logic integrated circuits from Actel.”

     

    Awards:

    December 2010

    Competition: "The best young specialist” in Federal State Research Institute “Argon”, Moscow, Russia

    Topic: "Adoption of modern design environments"

    Place: Price-winner

     

    Language Programs:

    Cultural exchange programm –summer 2008 and 2009 (The USA, New Jersey)

     

    References upon request

     

    Hobbies

    • American Football
    • Basketball
    • Cultures
    • Languages


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics