Latest Space News
Fri, 16 Feb 2018 21:45:19 +0000
NASA has certified the current version of the SpaceX Falcon 9 to launch some categories of science missions, a milestone needed for the upcoming, but delayed, launch of an astronomy spacecraft. SpaceNews.com
Fri, 16 Feb 2018 19:38:53 +0000
Eutelsat Chief Executive Officer Rodolphe Belmer is taking a contrary view on short-term capacity leases and the explosive growth of video streaming — two disruptive video trends causing angst among satellite operators with substantial television broadcast business. SpaceNews.com
Fri, 16 Feb 2018 15:20:41 +0000
The U.S. Air Force and Aerojet Rocketdyne are working to revise an agreement to support development of the company's AR1 rocket engine, as questions continue about the engine's long-term future. SpaceNews.com
Thu, 15 Feb 2018 23:05:27 +0000
The president of the Canadian Space Agency said he is taking a "wait and see" approach to NASA's plans to end funding of the International Space Station in the mid-2020s, citing the lack of detail. SpaceNews.com
Thu, 15 Feb 2018 22:38:59 +0000
NASA’s topline budget will be flat for the foreseeable future — which means an effective decrease in real dollar funding for the agency. As a result, President Trump may see his moon plans come crashing down to Earth. SpaceNews.com
Thu, 15 Feb 2018 20:09:54 +0000
Satellite hardware and network builder Gilat of Israel, seeking to interest cellular operators in expanding their reach by satellite, is pressing forward with a strategy of building the entire network for them in exchange for multi-year commitments to pay for the service. SpaceNews.com
Thu, 15 Feb 2018 18:33:42 +0000
The Air Force creating a budget line for small launch is a “very good thing for the industry,” said Steve Nixon, vice president of strategic development at Stratolaunch. SpaceNews.com
Thu, 15 Feb 2018 17:31:01 +0000
Fleet operator ViaSat’s newest satellite could lose around 15 percent of its intended throughput due to an antenna problem discovered after launch. SpaceNews.com
Thu, 15 Feb 2018 09:34:06 +0000
A United Nations committee reached agreement last week on nine guidelines intended to reduce the risk of collisions in space and other harmful space activities. SpaceNews.com
Wed, 14 Feb 2018 19:25:22 +0000
Federal Communications Commission Chairman Ajit Pai wants his agency approve SpaceX’s 15-month-old application to serve the U.S. with its proposed megaconstellation. SpaceNews.com
Wed, 14 Feb 2018 18:17:22 +0000
U.S. intelligence report: “Russia and China aim to have nondestructive and destructive counter-space weapons available for use during a potential future conflict.” SpaceNews.com
Wed, 14 Feb 2018 11:27:31 +0000
The fiscal year 2019 budget proposal for NOAA restores an earlier schedule for two future polar-orbiting weather satellites that faced potential delays last year. SpaceNews.com
Tue, 13 Feb 2018 23:21:14 +0000
Stymied by extended regulatory delays, Planet is planning to remove a ground station it built in Canada if it does not receive a government license for it by June. SpaceNews.com
Tue, 13 Feb 2018 23:19:33 +0000
An initial look at the budget documents released on Monday reveals that spending on space is up only modestly but that priorities appear to be shifting. SpaceNews.com
Tue, 13 Feb 2018 23:06:28 +0000
In a Feb. 13 solicitation, the Air Force announced it will “conduct a full and open competition” for the production of 22 GPS 3 satellites. SpaceNews.com
Mon, 12 Feb 2018 22:26:43 +0000
“We are in a more dangerous security environment than we have seen in a generation,” said Maj. Gen. John Pletcher, the Air Force budget director. SpaceNews.com
Mon, 12 Feb 2018 17:15:39 +0000
The Trump administration is offering $19.6 billion for NASA in its fiscal year 2019 request, while seeking to cancel a flagship astronomy mission and end NASA funding of the International Space Station in 2025. SpaceNews.com
Mon, 12 Feb 2018 16:31:08 +0000
Satellite fleet operator SES on Feb. 12 announced that CEO Karim Michel Sabbagh will be leaving the company April 5, exactly four years after assuming the position. SpaceNews.com
Mon, 12 Feb 2018 15:25:56 +0000
DARPA, which has a checkered history of supporting development of new launch vehicles, is planning to start a competition offering prizes for responsive launch systems. SpaceNews.com
Sun, 11 Feb 2018 18:05:54 +0000
NASA's fiscal year 2019 budget proposal will include plans to end funding for the International Space Station in 2025, but leaves open the possibility of handing part or all of the station over to private operators. SpaceNews.com
More space news...
18412 cvs - 1029 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Aerospace Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:04-07-2012
     Last Modified:08-07-2012 (08:17)
    Job information
     Current job:Aerospace Engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:within 3months
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, , , Launch Systems, Business Services
     KeywordsIntelligent and team-oriented Aerospace Engineer with a strong educational background and proven talent through numerous notable projects applying extensive mathematical, design and computer knowledge. Expertise with the interpretation of technical engine
    CV
    AEROSPACE ENGINEER
     
    Aerospace | Mechanical | Automotive
     
    Intelligent and team-oriented Aerospace Engineer with a strong educational background and proven talent through numerous notable projects applying extensive mathematical, design and computer knowledge. Expertise with the interpretation of technical engineering specifics and flexible and pro-active support of flight engineering and operational procedures. Able to analyze and strategize from a group perspective and streamline solutions with clarity and enthusiasm.
     
    EDUCATION
     
    Master of Science in Aerospace Engineering | San Jose State University | San Jose, CA (GPA 3.2/4.0) – 2012
    Bachelor of Technology in Aerospace Engineering | Amrita Viswa Vidyapeetham | Coimbatore, India (GPA 6.8/10) – 2011
     
     
     
    CORE FOCUS
     
    * Computer Aided Design
    * Low Speed Aerodynamics
    * Fluid/Aerodynamics Concepts
    * Finite Element Concepts
    * Mechanical Design/Analysis
    * Solid Mechanics
    * Electric Aircraft Design
    * Finite Element Analysis
    Technology: CAD/ CFD/ Structural Analysis Software (PRO -E, SOLID WORKS, CATIA, GAMBIT/ FLUENT, ESI CFD, HYPERMESH/ABAQUS, MSC NASTRAN/PATRAN); Intermediate Certification in CATIA V5
     
     
    PROJECT EXPERIENCE
     
     
    Analysis of Ballistic Impact on Composite Plates
    Modeled a projectile and composite plate in HYPERMESH. Kevlar 29–epoxy and Kevlar 49–epoxy materials, 2-d shell elements were used for modeling. The edges of the plate were fixed. AK-47 bullet was used as the projectile. The steel bullet was modeled with 2-d solid elements and input with a projectile velocity of 700 m/s. The stress/failure analysis was performed on the composite plate at five different ply orientation angles using the ABAQUS solver
     
    Analysis of Ribs and Spars of an Aircraft Wing
    Ribs and spars of a two-seater general aviation aircraft were designed in CATIA and stress analysis was performed in MSC NASTRAN/PATRAN. The shape of the rib was based on an NACA 0012 airfoil. The rib structure was optimized; cut-outs and flanges were optimized based on the stress analysis results. An I-beam spar was used to provide concentration to key loading points and due to maximum bending resistance to weight ratio
     
    Design, Manufacture and Analysis of a Finite Wing
    A finite wing was constructed with wood out of an NACA 23018 airfoil with no sweep. Wind tunnel tests were performed on the wing at different angles of attack. The results were compared with the CFD results
     
    Design, Manufacture and Analysis of an Aircraft with Maximum Payload Capabilities 
    A model aircraft with maximum payload capabilities was designed and constructed using wood. A surface flow visualization was performed in a low speed wind tunnel with a flow speed of 30 m/s. Flow data was measured using pivot tubes that were set up throughout the surface of the model and compared with the CFD results obtained from GAMBIT/FLUENT 
     
    Sonic Boom Mitigation by Aircraft Nose Cone Modification
    The sonic boom intensities of five different axisymmetric aircraft nose geometries were studied through analytical method and CFD analysis. The nose geometry was modeled using SOLID WORKS. The CFD analysis was performed using ESI CFD to find geometries of lesser deflection angles producing a relatively lesser sonic boom
     
    CFD Analysis of Airflow within the Front Wheel Cavity of Automobiles
    2-d and 3-d flow analyses of front wheel cavity of a car were performed using GAMBIT/FLUENT with a rotating boundary condition specified for the wheel. Results indicated drag produced is proportional to the size of the cavity
     
    Design of a 4-Seat General Aviation Electric Aircraft
    Designed a 4-seat general aviation electric aircraft with a maximum range of 800 Km. The aircraft is powered by an electric power system that comprises of a battery driven electric motor-propeller system. The aircraft has a takeoff weight of 1750 kg, and a cruise speed of 200 km/hr
     
    Design of an Aerial Firefighting Vehicle
    Designed an aerial firefighting vehicle that will replace the fleet of aircraft currently in operation. It is a twin engine amphibious aircraft with a twin tail boom empennage that is designed to carry a payload of 12,500 lbs. This will enable the aircraft to carry 1,200 gallons of water or fire retardant
     
    CFD Analysis of a Subsonic Joined Wing Aircraft
    A joined wing aircraft was modeled in SOLID WORKS. The analysis was performed using ESI CFD in 3 stages; wing tips, wings and interaction between wing and fuselage. The results were obtained to verify increased aerodynamic performance, increased wing structure support, high maneuverability and STOL ability
     
    CAD Design & Analysis Projects – CATIA V5 
    * Harley Davidson wheel design
    * Motorized can crusher – Design, Motion Analysis and Optimization
    * Machine Gun – Design, Motion Analysis, FEA and Optimization


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics