Latest Space News
Fri, 17 Aug 2018 02:34:20 +0000
The space industry outsider nominated to become NASA deputy administrator said he would focus on acquisition reform and adapting NASA to a “new role” with commercial partners if confirmed by the Senate. SpaceNews.com
Thu, 16 Aug 2018 21:48:01 +0000
A proposed standard announced at a conference last week seeks to provide the same launch flexibility for larger smallsats currently enjoyed by cubesats. SpaceNews.com
Thu, 16 Aug 2018 21:28:17 +0000
An audit by the Defense Department’s inspector general office found security cracks in the supply chain of four critical military space programs. SpaceNews.com
Thu, 16 Aug 2018 21:25:38 +0000
Canadian remote sensing company UrtheCast says it has sufficient resources to cover the $20 million purchase of analytics firm Geosys from U.S. dairy giant Land O’Lakes. SpaceNews.com
Thu, 16 Aug 2018 17:34:03 +0000
Millennium Space Systems was founded in 2001 and has approximately 260 employees. It has developed satellites ranging from 50 kg to more than 6,000 kg. SpaceNews.com
Thu, 16 Aug 2018 12:00:22 +0000
SSL, a company known for building communications satellites and spacecraft systems, will help the U.S. Air Force Space and Missile Systems Center define its next generation of protected military communications, the Maxar Technologies company announced Aug. 16. SpaceNews.com
Thu, 16 Aug 2018 09:20:11 +0000
The commercial spaceflight industry has been enjoying success both on and off the launch pad this year. SpaceNews.com
Thu, 16 Aug 2018 05:05:34 +0000
Descartes Labs announced Aug. 15 a partnership with Airbus to feed high resolution global imagery into its geospatial data platform. The Sante Fe, New Mexico-based startup also completed beta testing of its cloud-based “data refinery,” and added weather data. SpaceNews.com
Thu, 16 Aug 2018 00:21:09 +0000
International mistrust in space could become a bigger problem as the commercial space industry continues to grow and demand a peaceful environment to do business. SpaceNews.com
Wed, 15 Aug 2018 22:55:18 +0000
NASA says an Aug. 14 test of an engine for the Space Launch System was a success despite an unspecified “facility issue” that caused the test to end early. SpaceNews.com
Wed, 15 Aug 2018 18:18:44 +0000
ESA is pushing European industry to continue innovating and finding efficiencies even after Vega C’s introduction in 2019 and Ariane 6’s debut in 2020. SpaceNews.com
Wed, 15 Aug 2018 18:13:20 +0000
China will launch its Chang’e-4 lander and rover mission in December in what will be the first ever attempt at a soft landing on the far side of the moon, authorities said Aug. 15 SpaceNews.com
Tue, 14 Aug 2018 23:33:39 +0000
NASA has done a good job implementing the recommendations of its latest planetary science decadal survey despite past budget problems, but needs to improve some programs, a recent report concluded. SpaceNews.com
Tue, 14 Aug 2018 22:04:46 +0000
The Air Force will use “rapid procurement authorities” in this program and is targeting the first next-generation OPIR launch in 2023. SpaceNews.com
Tue, 14 Aug 2018 21:57:09 +0000
The Pentagon's Joint Oversight Requirements Council will be briefed this fall on potential solutions to a major national security vulnerability: hypersonic weapons that fly into space at supersonic speeds and descend back down to Earth directly on top of targets. SpaceNews.com
Tue, 14 Aug 2018 13:42:54 +0000
Chinese private launch vehicle maker OneSpace has secured $43.6 million in Series B financing as the company looks to its first orbital launch near the end of 2018. SpaceNews.com
Tue, 14 Aug 2018 00:32:25 +0000
Exos Aerospace, a Texas company developing a reusable suborbital rocket, now plans to carry out a first flight of its vehicle in late August as it sets its sights on a follow-on orbital vehicle. SpaceNews.com
Mon, 13 Aug 2018 19:50:09 +0000
Viasat is still working on a medium-Earth-orbit satellite constellation idea revealed almost two years ago, but has not finalized what that system would look like, Mark Dankberg, CEO of Viasat, said Aug. 9. SpaceNews.com
Mon, 13 Aug 2018 03:47:45 +0000
At the annual SMI MilSatCom Conference in 2017, Army Major General Pete Gallagher, former CENTCOM/J6, shared a vignette about U.S. forces fighting ISIS in the CENTCOM Area of Responsibility. SpaceNews.com
Sun, 12 Aug 2018 19:19:58 +0000
Griffin: "The bumper sticker version of my job is that I don’t have anything to do with anything that the Defense Department is currently buying. " SpaceNews.com
More space news...
18754 cvs - 833 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Sr. Electronics Engineering Technician

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:03-08-2012
     Last Modified:03-08-2012 (08:09)
    Job information
     Current job:Sr. Electronics Engineering Technician
     Employment Term:Permanent
     Job location:Anywhere
     Date available:immediately
     Industry:Satellite Manufacturers and Subcontractors
     Keywords30+ years in the manufacturing/assembly of satelite harnesses, Printed circuit board, chassis assemblies and integration and test . Worked with system engineers in generating harness design drawings and schematics using visio and vesys drawing programs, a
    CV

    CAREER OBJECTIVES

           A position with a high-tech electronics firm, using state-of-the-art technology that desires my experience and expertise to assist in their goals for the future.

     EXPERIENCE

          Thirty + year’s professional experience and expertise in the manufacture and development of state-of-the-art  hardware and circuitry for a wide variety of applications. Manufactured a number of flight and non-flight, prototype high-speed, high-density micro-computer boards, computer systems and both flight and non-flight cable and harness  assemblies.  Qualified to provide expert quality control of any related product line. Experienced in the development and quality of Space Flight products. Certified in high reliability solder and inspection applications.

          Experienced in Spacecraft integration and test, development and implementation of manufacturing cable and harness drawings, work instruction/certlog using a varity of software.  

          Supported Launch site activities for various NASA flight Projects.

     CLEARANCE: Supplied upon request

     EMPLOYMENT HISTORY

    Sept. 1, 2011 to July 31 2012     COMTECH AEROASTRO, Ashburn, Virginia

    Sr. Electronics Eng. Tech - Fabricate both Flight and non-Flight harness and cable assemblies. Solder Printed Wiring Boards, small electronic and RF sub-assemblies. Manufacturing in process inspection, cross train Jr. level technicians, review and help develop manufacturing process and Integration and test. Installed BGA components.  NASA Certificate required. 8739.2, 8739.3 & 8739.4

    Developed and generated EGSE, flight and non-flight Spacecraft harness assembly  drawings using Visys and Visio software.

    May 2011 to Aug. 31, 2011            AEROTEK (temp agency)

    Sr. Electronics Tech (Contract to Comtech AeroAstro). - Fabricate/install and integrate spacecraft Flight and non-flight cable/harness assemblies. Ability to read schematics, wiring diagrams and assembly instruction. Work well with engineering instructions. Harness design using Visys and Visio to generate harness and cable drawing. Use Excel to generate parts list and wire list.

    Nov., 1997 to May 2011                     ATK SPACE Formally SWALES AEROSPACE Beltsville, Md.

    ASSY- TECH 10 - Fabricate Flight Spacecraft Bus harnesses and cables. Non-flight cables and GSE. Fabricate/Wire chassis assemblies, P.C. boards, Transformers, coils, heaters and thermistor, from wire list, board and wiring diagrams and schematics.  Incorporate engineering changes and rework, all in accordance with NASA specifications for Flight and Non-flight assemblies. Help Engineering with Space flight harness design, Develop and generate harness assembly dwg's using Auto sketch, Visio and RSD (Routed systems Designer 6.0). Help generate and develop work instructions / certlogs for several Flight and non-flight Programs. Perform Parts Master functions for engineering group using Cost Point as needed. Also act as lead Electronics tech for most flight projects/programs. Help other techs with technical issues and fabrication needs. Projects worked on Include: PGT- crew aids pistol grip tools, New Horizons, LRO, TacSat, Secchi, HST/WFC3, HST/Cats, HST/MPT, JWST, SOFIA, etc.

                    Assembly integ tech 6 - Tac Sat 3 Project

                    Fabricate / install/ integrate Flight Spacecraft Bus and solar array  harnesses. Incorporate Engineering changes into Flight harness and instrument sub-assemblies. Worked/cross trained JR engineer in generating drawings and Certlogs/work instructions.

                    Lead Harness tech – Themis Project.

    Duties included working close with Primary project engineers in the Design and Development of Flight Harnesses and Dwgs, certlogs/work instruction. Fabricate, Instruct/train other technicians in fabrication of flight S/C Bus harnesses, non-flight cables/harnesses and flight and non-flight sub-assemblies. Performed Quality in process inspection and production control activities. Perform Milliohm/continuity and High pot testing of all harnesses/cables. Install flight harnesses onto flight structure.

    Lead harness Tech – Swift XRT project

               Duties included working close with Primary project engineers in the   Design and Development of Flight Harnesses and Dwgs, certlogs/work instruction. Fabricate flight instrument harnesses, wire S/C bus and electronics box thermal system and sub-assemblies. Other duties include Quality in process inspection and production control activities. Perform Milliohm/continuity and High pot testing of all harnesses/cables. Install flight harnesses onto flight structure. 

     Lead Aerospace Technician - EO-1 project

    I & T technician lead on the Earth Observing-1 (E.O-1) New Millennium Program. Responsibilities include Support of all I & T launch activities at VAFB, California. Harness design and development. Harness drawing development and control. Fabrication and test all flight harnesses, heater and thermistors using general hand tools and precision test measurement equipment, such as High-Pot tester (Cirrus 1000+H), megohm meter, Valhalla Milliohm meter and digital Multimeters. Other responsibilities include managing and cross training all cable manufacturing and test technicians working on E.O-1. Other duties include interfacing with customers and engineers on technical issues and perform general management duties. Worked several projects for Goddard Space Flight Center in Surface Mount Technology, development and repair (including 25 mil ultra fine line parts). Worked as Lead harness tech on VCL-MBLA Project. Responsibilities include fabrication and development of flight harness per customer instructions. Oversee and instruct assembly personal on assembly applications and instructions.  Wire chassis and P.C. boards from wire list, board and wiring diagrams and schematics. Wire wrapping, incorporate engineering changes and Rework. Testing of flight and non-flight cables. All in accordance with Customer and NASA specifications for Flight and Non-flight assemblies.

    July 27, 1992 to 1997              JACKSON & TULL Seabrook, Md.

    Lead Electronics Technician - Lead Technician, for Cable and Printed Circuit board fabrication departments. Responsibilities include Fabrication of PCB’s using the latest in Surface Mount Technology, Cable and Harness assemblies, Wire chassis and P.C. boards from wire list, board and wiring diagrams and schematics. Wire wrapping, incorporate engineering changes and Rework. Testing of flight and non-flight cables. All in accordance with Customer and NASA specifications for Flight and Non-flight assemblies. Assist in the Training and Managing of all PCB and Cable manufacturing personnel. Interface with customers and engineers on technical issues. And general management duties.  Projects worked on Include: TRW’s - SSTI (Small Spacecraft Technology Initiative) spacecraft HST (Hubble Space Telescope)/NICMOS (Near-Infrared Camera and Multi-Object Spectrometer), HST/STIS (Space Telescope Imaging Spectrograph),  HST/FGS (Fine Guidance Sensor, HST/SADE (Solar Array Drive Electronics), HST/DIU (Data Interface Unit), HST/SSR (Solid State Recorders), HST/ESTR (Engineering/Science Tape Recorder), HST/AME (Actuator Motor Electronics). E.O.S Project, etc. Equipment used to accomplish all tasks is: TMS 90 label system, cirris 2000 Hi-pot tester, HP 4338A milliohm and multi-meters, Novastar 16P wave soldering machine and Vitronics 500S Forced/Convection Soldering Oven, Fancort semi pneumatic lead forming press using universal forming tool FA 2684 for both standard and fine mil-pitch packages. O.K Industries BGA-2000/SMW-2000 series convection preheater, BGA & Fine Pitch Micro Placer, PI-70 manual Pick-and-place for SMT, and general hand tools and soldering irons for assembly.

     1989 - 27, July 1992               EER Systems Corp. Seabrook, Md.

    Electronic Technician - Integration and Test Technician on the Extreme Ultraviolet Explorer Project (EUVE). Responsibilities are fabrication and testing of all flight harnesses using general hand tools and precision test measurement equipment, such as High- Pot, Milliohm and digital Multimeters, Oscilloscopes etc., Assisted test engineers in commanding and recording all data, monitor and record all measurements of all instruments on EUVE payload. Supporting engineers with documentation and drawing updates using a wide range of computer packages.  Supported all launch activities at KSC/CCAFS (Kennedy Space Center/Cape Canaveral Air force Station) for the EUVE Payload Module, activities include post ship integration and testing. Finalize and prepare payload for flight readiness and close out. Performed stray Voltage checks and Armed all EUVE payload module EED's. Fabrication of Printed Circuit Boards, Cable assemblies wire chassis, wire wrapping, and incorporating engineering changes and rework. Ability to read and interpret wiring diagrams, assembly drawings, schematics and other related documents is essential to perform and complete assigned tasks. Performs Pre inspection of all assemblies to ensure proper compliance with NASA, NASA certified NHB.5300.4 (3A-1)(3G)(3H).

     1/1989 to 1989 P/T (Job Shop) PULSE Inc. Beltsville, Maryland

    Electronic Technician - Fabricated Printed Circuit Board, cable and chassis wiring and assemblies. Performed wire wrapping, Using schematics and assembly drawings.

     3/87 to 1/89                                            IDEAS Inc. 10741 Tucker St. Beltsville, Md. 20705

    Assembler A - Fabricated P.C boards, Transformers, coils and cables. Wire chassis and P.C. boards from wire list, board and wiring diagrams and schematics. Other tasks performed include wire wrapping, incorporate engineering changes and rework. all in accordance with NASA specifications for Flight and Non-flight assemblies. NASA Certified NHB5300.4(3A-1) Flight Projects worked on Include: GRO Compel, GRO Egret, BBXRT, COBE, Space station, Shoot, AESE

    86 to 3/87                                            FAIRCHILD SPACE Co. Germantown, MD.

    Assembler Technician A - Developed Prototype and limited Production type hardware on very densely populated and complex assemblies in accordance with NASA and Fairchild Workmanship specifications. Read and interpret wire list and schematics, generate engineering changes, perform lap joints and reflow soldering. Test Rework NASA Certified NHB5300.4 (3A-1).

     1981 to 1986                                       U.S. DESIGN CORPORATION 4311 Forbes Blvd. Lanham, Md. 20706

    Group leader, Supervisor (ACT) - Group Leader, Supervisor of Advanced Products, Supervised Printed Circuit assembly, Mechanical assembly, wave solder and Machine shop. Generated Engineering changes. Additional duties included employee training, programming of computer chips, quality control, stuffing components, and hand soldering of P.C. boards, cable assemblies and harness. Also responsible for all Prototype introductions to production levels. Tools used to accomplish these goals include a multi-master Programmer(M3016A) Pro-log Prom Programmer (M910A: w/pm 9075A, 9037 MMI generic Pal Development System (SD 20/40, Amistar CI 750 Dip Inserter, T & B Auto Feed Lugger and Bench Press, AMP Pneumatic Crimp tools, Ansley and Amp Hand tools.

     1980 to 1981                                       TECH SERV - Beltsville, Md. 20705

    P.C Assembler/Test & Rework Tech. - Assembled, Tested, and reworked RF Receivers. Use of Oscilloscope for testing and setting all frequencies.

     1980                                                       PACE Inc. - Laurel, Maryland .

     Wiring technician/ Electronic Assembler

     1979 - 1980                                          HEKIMIAN LABS Inc. - Gaithersburg, Maryland

                                                                     P.C. Assembler / Inventory Control Clerk.

      EDUCATION:

     NASA STD Certified to - 8739.1, 8739.2, 8739.3, 8739.4 - ongoing 

     Routed Systems Designer 6.0 – 2006 – C of T

    Laurel Senior High - Diploma received - 1976

     Art Instructional School - received Certificate - 1977

     Seminar for Basic Supervision - Certificate

     Comtech AeroAstro – NASA-STD-8739.2, .3

    Swales Aerospace / ATK Aerospace - NASA-STD-8739.1, .2, .3, .4

     Fairchild Space Flight Co. - NHB5300.4 (3A-1) - Certificate

     Goddard Space Flight Co. - NHB5300.4 (3A-1) (3A-2) - Certificate

        - NHB5300.4 (3G) (3H) - Certificate

     Jackson & Tull - NHB5300.4 (3A-2),(3G),(3H),(3M) - Cert.

                 - MIL-STD-1686 - Cert.

     Howard Community College - Electronic/Telecommunication Technology – ongoing

     

     AWARDS/HONORS

     Letter of recommendations – Comtech AeroAstro

     Managers Award – Comtech AeroAstro

     Peer Award – Comtech AeroAstro

    Letter of Appreciation - NASA - VCL project (Swales)

     Letter of Appreciation - U.S Design Corporation

     Letter of Recommendation - U. S Design Corporation

     Letter of Recommendation - Fairchild Space Company

     Certificate of Appreciation - EER Systems Corporation

     COBE Group Award - NASA - Ideas Inc.

     AESE Award - NASA - Ideas Inc.

     EUVE Group Award - NASA

     Flight Systems & Servicing Project Award - HST/NASA

     HST Group and Team Award – NASA

     EO-1 Group Award – NASA - Swales Aerospace

     SWIFT Group Award – NASA

     THEMIS Group and Team Award – NASA

     

     COMPUTER SKILLS

    Systems/Packages - Orcad, Dbase Plus, III, Gem, Wordperfect 5.0, Microsoft windows, (Microsoft Word,

    Excel, Project, Power Point.), Fox Pro for windows, Designer 3.1, Auto Cad Light RSD – Routed systems Designer 6.0,

    Visio, Auto Sketch , Visys.


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics