Extensive hands-on Engineering experience in RF
Security Clearance, Top Secret: TS/SCI/PKI with Polygraph.
Senior Electronics Technician. Oct 2009 to April 2013
Contracting at SAIC on QRC/Hilton Head. Sensitive projects for Fort Meade.
Built Tested and troubleshoot prototypes and Deliverable units. Solder SMT fine pitch components. Used Anechoic chamber to characterize antenna patterns. Order Lab Supplies.
reverse engineering as needed. Order components as needed for projects.
Senior Electrical Engineer. May 2007 to July 2009
Assigned to a team to develop a new brass board. The new product will be used for biological chemical detection. Testing new concepts, soldering and fabrication. Ordering components as needed. Keeping a Lab notebook and stocking Lab as needed. Also troubleshooting as needed.
Built prototypes, which were successfully tested at an approved Lab for chemical detection.
Associate Hardware Engineer. April 2006 to Nov 2006
Responsible for Hardware Lab and all aspects of LX 2 scanner used to analyze cell towers.
Find component substitutes that are RoHS compliant. Solder SMD components as needed.
Test and Troubleshoot using Oscilloscopes, Signal Generators, Network Analyzer, RF Probe,
Spectrum Analyzers, RF Power Meter, DVM’s and Lab Power supplies. Order Lab Supplies
Senior Technician, Engineering. Jan 2005 to March 2006
Layout PC BD using P-Cad, as well as Schematic Capture for prototypes. Tested and did troubleshooting as needed on electronic analog and RF Boards. Operated a Pick and Place machine and Probe stations. Solder SMD parts, fine pitch.
Johns Hopkins University APL
Engineering Assistant, Space Dept. SER, Communication Lab. March 2002 to Jan 2005
Tested and tuned prototypes, as needed, for spacecraft designs on New Horizons, Stereo and, Messenger.
Used Cadence OrCad to capture schematics and layout printed circuit boards. Soldered Surface Mount Devices and parts and fine pitch; performed tests and made necessary changes to meet design goals of the prototypes. Ordered engineering kits and components as needed for projects. Plotted data and write overview of performance. Types of designs are primarily RF. Designed and built test equipment for flight circuits and ground support equipment using frequencies up to 8 GHz. Responsible for all aspects of the Engineering Lab, including equipment calibration. Worked Satellite tracking station 60-foot dish for the MSX spacecraft. Fabricated RF Cables and Harnesses as needed for environmental testing, Thermal Vacuum and Vibration are typical test.
Senior Electronics Technician Advanced Engineering Development Group. 1998 to June 2001
Layout from Schematics, printed circuit boards using CAD program, Protel. Export Gerber files to X Y milling machine. After making Board, solder SMD parts and test performance and make necessary changes to meet design goals. Order engineering kits and components as needed for projects. Plot data and write overview of performance. Types of designs were RF. Purchased all required equipment and assembled a test station for fiber optic modulator evaluation.
LOCKHEED MARTIN CORP. SPACE DIV.
Senior Technician RF, Communications/Engineering Technician 1989-1998
Assigned to Manufacturing Test after transferring from the Engineering Department. Tested, tuned, aligned and trouble shoot to component level Satellite Receivers, Transmitters SSPA‘s, linearizer TWTAs, and tuned microstrip for performance specifications. Frequency range up to 20 GHz. Also responsible for the building and testing of prototypes for design reviews. Assisted with the design of special test equipment to include noise figure, phase noise, group delay, and spurious harmonic radiation, IMD, NPR, BER and EMI. Also performed Auto testing using computer to control testing and Environmental testing such as thermal vacuum and vibration per customer requirements. Some test equipment utilized included HP 8510 Network Analyzer, Spectrum Analyzer, Signal Generators, and Oscilloscopes. Assisted Jr. Technicians with troubleshooting and setups.
ICI AMERICAS INC., AEROSPACE DIV.
Valley Forge, Pa.
Senior Electronic Engineer 1984-1988
Product engineer for D/Tech electronic article surveillance systems, which operated from 900 MHz to 1800 MHz. Responsible for all aspects, such as assembly procedures. Design of new or improvement of existing products, such as audible alarms, power supplies and displays. Have taped artwork for PC boards. Worked closely with our development engineering to transfer new products into production Drawings as needed for product lines. Also worked with field service
group on new products. Made all necessary drawings as required. Reviewed incoming inspection reports, worked with purchasing as needed to find an alternate vender or improve lead time/cost, managed final test area, three technicians and all test procedures and ECN's as needed. Used Microsoft Office as needed.
RCA (GE) ASTRO SPACE DIV.
Engineering Technician, Receiver Design Group 1983-1984
Helped on development of 17/12 GHz. Communication Receiver used on DBS Satellite. Did lab testing grafts of data on computer and tuning and alignment of prototypes also helped with production units into manufacturing. Organized design review data for pubs. Built special test equipment as needed for manufacturing. ESD, NASA Soldering, Mate-De-mate, Clean Room cert
TELEDYNAMICS DIV. UNITED TECHNOLOGY CORP.
Fort Washington, PA
Design Engineer, RF Group 1973-1983
Developed and improved new products and improved existing procedures. Tested and aligned prototypes to meet requirements of customer's specifications, such as IRIG. Products included telemetry transmitters and receivers in the 2.2-2.3 GHz. S-band; frequency synthesizer at 110MHz; and power amplifiers up to 50 Watts.
Transferred products through to manufacturing. Some programs worked on included Lockheed Trident, Rockwell's Space Shuttle, Martin Marietta's Titan III, the Navy's Anti-Submarine System, and IR Video Type Transmitter used on the Air Force Maverick Missile.
NORDEN, DIVISION UNITED TECHNOLOGY CORPORATION
Engineering Aide, Research and Development, Video System 1968-1969
Tested and built many prototype electronic circuits. Worked with engineers on F111 aircraft, heads-up display system prototype, and setting up necessary test equipment. Did trouble-shooting as needed. Worked on the development of the Super Sonic Transport avionics heads up display system.
PHILADELPHIA WIRELESS TECHNICAL INSTITUTE, Philadelphia, PA
Associate Radio Engineering 1968
INTERNATIONAL CORRESPONDENCE SCHOOLS, Scranton, PA
Diploma TV/Electronics 1973
RADIO RELAY EQUIPMENT REPAIR, Keesler AFB, Mississippi, USAF
Certificate Radio Relay and Special Course on Modulation/time division 1969
Cadence Training School, Sunnyvale CA.
Diploma OrCad Layout and Capture. 2004
UNITED STATES AIR FORCE 1969-1973
Radio Relay Equipment Repairman
Operated and maintained tropospheric scatter systems and microwave systems; diagnosed and solved problems using troubleshooting techniques; frequency multiplexing; teletype and transmitting and receiving equipment from up to 2 GHz range.
Co inventor on a Miniature Ionization Source. This is Patent pending.
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!
2020 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
|6 months - Silver||1950 euros||convert|
|12 months - Gold||3200 euros||convert|
If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at email@example.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing firstname.lastname@example.org. Accounts found not to be in compliance will be deleted.