Latest Space News
Thu, 20 Feb 2020 00:25:55 +0000
The “United States Space Force Vision for Satellite Communications” was approved by Gen. John Raymond on Jan. 23. SpaceNews.com
Wed, 19 Feb 2020 23:20:35 +0000
Spaceflight Industries’ decision to sell its rideshare launch services company, Spaceflight, to two Japanese firms will benefit both Spaceflight and its parent company, executives of the two companies say. SpaceNews.com
Wed, 19 Feb 2020 22:56:13 +0000
China launched a Long March 2D rocket from its inland Xichang launch center Wednesday, marking a return to activity following the Chinese New Year. SpaceNews.com
Wed, 19 Feb 2020 21:48:29 +0000
The Colorado Springs Chamber & EDC kicked off a $350,000 national public relations campaign. SpaceNews.com
Wed, 19 Feb 2020 20:14:47 +0000
Lockheed Martin says it lost $410 million on the first three commercial satellites built on its new LM2100 platform, including the JCSAT-17 satellite Arianespace launched Feb. 18 on an Ariane 5 rocket. SpaceNews.com
Wed, 19 Feb 2020 14:46:43 +0000
The head of NOAA’s space weather office used a recent hearing to caution that a failure of an aging spacecraft in the next few years could leave the agency “hurting a little bit” in its ability to monitor solar activity. SpaceNews.com
Wed, 19 Feb 2020 01:55:21 +0000
With just a week before the first scheduled launch in DARPA’s responsive launch competition, the agency is tweaking the rules to allow the sole remaining company to perform both launches from the same spaceport. SpaceNews.com
Tue, 18 Feb 2020 23:57:21 +0000
Arianespace completed its third launch of the year Feb. 18, sending a Japanese communications satellite and a South Korean weather satellite into geostationary transfer orbits.  SpaceNews.com
Tue, 18 Feb 2020 20:11:09 +0000
Radio-frequency-mapping startup Kleos Space on Feb. 18 said it received a $3.4 million loan from Dubai-based Winance to keep the company “well funded” while it awaits the launch of its first satellites.  SpaceNews.com
Tue, 18 Feb 2020 17:41:36 +0000
Space Adventures announced Feb. 18 that it has an agreement with SpaceX to fly a dedicated Crew Dragon mission that would send four space tourists on a mission to a relatively high Earth orbit. SpaceNews.com
Mon, 17 Feb 2020 22:11:05 +0000
In a recent SpaceNews Op-ed, Louis Friedman, co-founder and executive director emeritus of The Planetary Society, argues that the U.S. should pursue “a policy more directed to Mars and away from commercial participation. With all due respect to Friedman, I totally disagree. Focusing NASA programs on distant (in space, time, and money) goals can only ensure that U.S. space policy remains empty talk with no action. SpaceNews.com
Mon, 17 Feb 2020 21:16:20 +0000
Blue Origin formally opened a factory Feb. 17 that the company plans to use to produce engines both for its vehicles and for United Launch Alliance’s Vulcan rocket. SpaceNews.com
Mon, 17 Feb 2020 21:05:51 +0000
Intelsat has abandoned plans to order a one-for-one replacement for the Intelsat-29e satellite that failed last year and will rely instead on leased capacity, a borrowed satellite, and the newly ordered Intelsat-40e spacecraft to fill a coverage gap over North and South America.  SpaceNews.com
Mon, 17 Feb 2020 18:57:13 +0000
SpaceX completed its fifth dedicated Starlink launch Feb. 17, successfully sending 60 satellites into low Earth orbit while missing what would have been the company’s 50th booster recovery.  SpaceNews.com
Sun, 16 Feb 2020 20:46:33 +0000
China has quietly rolled out a new Long March 7A rocket at a coastal launch site in preparation for launch of a ‘technology verification satellite’. SpaceNews.com
Sun, 16 Feb 2020 14:42:14 +0000
The Commerce Department is once again requesting a large budget increase for its Office of Space Commerce in order to work on space traffic management activities after Congress rejected a similar request last year. SpaceNews.com
Sat, 15 Feb 2020 22:00:44 +0000
A Cygnus cargo spacecraft launched Feb. 15 carrying more than three tons of supplies and experiments for the International Space Station. SpaceNews.com
Sat, 15 Feb 2020 14:20:10 +0000
NASA awarded a contract to Rocket Lab Feb. 14 for the launch of a cubesat mission that will serve as a precursor for the agency’s planned lunar Gateway. SpaceNews.com
Fri, 14 Feb 2020 22:55:11 +0000
As Astra prepares for its first orbital launch attempt, the company is setting expectations accordingly and taking the long view towards its goal of frequent, low-cost access to space. SpaceNews.com
Fri, 14 Feb 2020 19:30:37 +0000
DirecTV’s Spaceway-1 satellite has been retired to a graveyard orbit 500 kilometers above the geostationary arc, eliminating the risk of the malfunctioning satellite exploding in an orbit populated by active satellites.  SpaceNews.com
More space news...
19620 cvs - 571 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Satellite Mechanical and Thermal Architecture Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:28-09-2012
     Last Modified:28-09-2012 (03:24)
    Job information
     Current job:Satellite Mechanical and Thermal Architecture Engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:immediately
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, , , Launch Systems, Business Services
     KeywordsSpace System Engineer, Project Management, Team Leader, Mechanical and Thermal Architecture, Testing, System Engineering, Requirement Management, Space Mission and Operation Analysis and Design, Concurrent Design CDF, End-to-End System Performance Evaluat
    CV

    DETAILED TALENT RESUME

    Aerospace Engineer

    Space Missions & Systems Analysis and Design

     

    Skills area

    *      Aerospace Engineering

    *      System Engineering

    *      Complex Space Project Requirements Analysis and Management

    *      Space Systems and Sub-systems Design and Modeling (Concurrent Design and Multidisciplinary Optimization)

    *      Mechanical and Thermal Architecture

    *      Space System Performances Evaluation and Simulation

    *      Space Mission and Operations Analysis and Design

    *      Launch Systems Trade-off

    *      Space Structure Mechanical Testing and Verification

    *      AIT/AIV

    *      Quality

    *      Project Management

    *      Providers Management

    *      Commercial Development

    *      Technical and Commercial Requirements Analysis for new Company’s Business

     

     

    Interventions

    *      Space System Engineer: Mechanical and Thermal Architect

    *      Space System Engineer: Design and Technical Management

    *      Space System Engineer: Missions, Operations and Systems Analysis and Design

    *      Test Engineer

    *      Aerospace Technical and Commercial Development Engineer

    *      Aerospace Quality Engineer

    Technical domains

    *      Mechanical and Thermal Architecture

    *      Space System and Sub-system Analysis and Design

    *      Space Missions and Operations Analysis and Design

    *      System Engineering

    *      AIT/AIV

    *      Structural Verification: Stress Corrosion Cracking Test, Metallographic Analysis, Tensile Test, Fractography

     

    *      CAD/CAO: SolidWorks, Rinocheros, CATIA V5, 3DVIA, Google SketchUp

    *      Mechanical Analysis: Nastran/Patran

    *      Numerical Computing, Modeling and Simulation: Matlab/Simulink, Scilab, Octave, Derive

     

    *      Operating Systems : windows, Mac OS, Linux

    *      Office: MS-Office (Word, Excel, Power Point), Open Office

    *      Project Management: Open Project, Open Workbench, Redmine, DeliveriZ

    *      Requirement Management : IBM DOORS, 3SL CRADLE

     

    *      Programming Language : C, C++, UML

    *      Configuration Management : ModeFRONTIER (MDO), MS Visio

     

    *      Space Software Tools : AGI STK, ESA STA, NASA GMAT, JAQAR Astrodynamics, ESA CDF/OCDS-IDM tool, CNES CDF-IDM tool

     

    Experience

    Thales Alenia Space (Cannes, France)

    External Consultant (CEST, Design Office Altran, Cannes, France)

    <6 months (current mission)>

    Position:                          Satellite Mechanical and Thermal Architecture Engineer

    Main Activities:              1. SWOT Program (Ph. A): Mechanical and Thermal Architecture Design 

                                               2. CERES Program: Support to Mechanical and Thermal Architect

                                               3. ExoMars Program: BOP/Drogue Interface Test Management

    #         Objectives:

     

    1.   SWOT Program (Oceanographic Satellite – Phase A)

    -    System Level Mechanical and Thermal Trade-off

    -    Satellite Platform Vs Payload Feasibility Study

    -    CAD/CAO General Satellite Configuration and Equipment Internal/External Accommodation Analysis

    -    Satellite Platform Structural Design according to System, AIT and Launcher Specifications 

    -    CAD/CAO Activities Coordination and Management

    -    Mechanical Analysis Coordination and Management

    -    Satellite Mass Budget and MCI (Masse, Centering, Inertia) Study

    -    Platform/Payload Interface Design

    -    Support to Development Plan definition 

     

    2.   CERES Program (French Defense Satellite)

    -    Support to Satellite Configuration Trade-off

    -    Satellite Mass Budget and MCI (Masse, Centering, Inertia) Study

    -    Support to General Satellite Configuration Definition and Equipment Internal/External Accommodation

    -    Description Document

     

    3.   ExoMars Program (Mars Exploration Mission)

    -    Implementation and Coordination of the Structural Strength Verification Activities of the BOP/Drogue Parachute Interfaces

     

     

     

    #         Achievements:

     

    1.   SWOT Program

    -    Mechanical and Thermal Trade-off among the prospected existing Satellite Platforms (PF GokTurk/MK-2, PF Prima/S1, PF S3, SpaceBus based PF)

    -    External Thermal Flow Calculation on Satellite

    -    Evaluation and Comparison of the Thermal Dissipation Capabilities of the prospected Platforms

    -    Coordination of the Thermal Analysis

    -    Impact Analysis of the various Solar Arrays Configurations on Satellite Mass Budget and MCI

    -    Optimum Internal and External Accommodation of the Satellite Equipment for some Satellite Configurations (Flight and Launch Configuration)

    -    Instruments, sensors and antennas Field of View (FoV) analysis

    -    Definition of Payload and Platform Allowed Volumes

    -    CAD/CAO Preliminary Modeling

    -    Coordination of the detailed CAD/CAO Modeling

    -    Detailed Structural Design of the Dedicated SWOT Satellite Platform based on a CFRP Central Tube issued by the SpaceBus heritage

    -    Detailed Structural Masse Budget definition

    -    Detailed MCI definition for some Satellite Configurations

    -    Detailed Payload/Platform Mechanical Interface Design

    -    Detailed Platform/Launcher Mechanical Interface Design  

    -    Detailed Propulsion System Support Design  

    -    Coordination of the Mechanical Analysis

    -    Analysis and interpretation of the Mechanical Analysis Results (Modal Analysis, Dynamic Analysis, Quasi-static Analysis of the Global Satellite, the Solar Arrays and the Payload)

    -    Participation at the Thales Alenia Space CDF (Concurrent Design Facilities) sessions as Mechanical and Thermal Architecture Engineer

    -    Project Management of the externalized activities performed at Altran Design Office (CEST) in the frame of the SWOT project and Coordination of the Engineering Team (CAD/CAO, Mechanical and Thermal Activities) 

    -    Technical Notes and Presentation (English) production

    -    Structure Development Plan Definition

    -    Structure Description Document

     

    2.   CERES Program

    -    CAD/CAO Modeling Activities Coordination and

    -    Support to Internal and External Equipment Accommodation

    -    Support to general Configuration Design

    -    Support to the definition of the Fairing Accommodation

    -    Mass Budget and MCI Definition for the prospected Satellite Configurations

    -    Description Document production

     

    3.   ExoMars Program (Mars Exploration Mission)

    -    Implementation and Coordination of the Structural Strength Verification Activities of the BOP/Drogue Parachute Interfaces

    -    Specimen Design

    -    Tool Test Interface Design

    -    Activities Planning

    -    Coordination of the Specimens and Tool Interface CAD/CAO Design

    -    Coordination of the external Providers (Specimens and Tool Interface Part manufacturing)

    -    Test Documentation Production

    #         Technical background:

    -    Mechanical and Thermal Architecture

    -    CDF (Concurrent Design Facilities)

    -    Testing

    -    Project Management

     

    -    Software tools: Catia V5, 3DVIA, Google SketchUp, DeliveriZ, Open Workbench, MS Office (Excel, Word, Power Point), CDF-IDM CNES


     

    Elecnor-Deimos Satellite Systems (Madrid, Spain)

    Position:                          Space System Engineer

    Main Activities:              Deimos-2 Project (Earth Observation Satellite, LEO): System Design, Providers activity Coordination, System and Sub-Systems Performances Analysis and Simulation, Flight and Ground Segment Mission and Operations Analysis and Design

    #         Objectives:

    -    Support to Deimos-2 Project Technical Management

    -    Providers Activities Piloting and Verification (for Flight and Ground Segment)

    -    Requirement Definition and Validation

    -    Requirement Management

    -    System Engineering

    -    End-to-End Flight and Ground Segment Performances Analysis

    -    Sub-systems Performances Analysis

    -    Definition and Analysis of t-he Flight and Ground Segment Operations 

    -    Implementation of an Optical Satellite Design Method (at System Level) 

    -    Support to Performances Simulation Implementation (End-to-End)

    -    Support to Elecnor-Deimos Satellite System Company Development

    #         Achievements:

    -    Definition of the high and low level requirements (Mission and System Requirements, Sub-System Specifications) and of the associated validation methods

    -    Requirements Management

    -    Impact Analysis of each Satellite Sub-systems Performances on the Flight and Ground Segments Design and overall Performances (Impact of the AOCS, TC/TM, Mass Memory Performances on the S/C and GS Operations)

    -    Military Specifications System Impact Analysis

    -    Analysis of the Impact on the Satellite Design and Performances due to an Auxiliary Payload

    -    Performed Analysis: Link Budget, Data Flow Analysis, Earth Observation Payload Performances Evaluation, deltaV Budget, AOCS Performances Vs Payload MTF, Satellite Components Duty Cycle Analysis, Power Budget and Profile Analysis.

    -    System Level Definition and Analysis of the Flight and Ground Segment Operations (LEOP, CAL/VAL, Mission Planning, Single and Multi-pointing Image Acquisition, TC/TM, Payload Data Downloading, Payload Data Processing, Orbit Correction and Maintenance Maneuvering, Collision Avoidance Maneuvering, End-to-end Operations)

    -    Support to Payload Image Data On-board Recording and Recovery Procedures

    -    Image Data Lost Estimation according to Operations and TC/TM and C&DH Performances       

    -    Support to detailed TC/TM Operations Design

    -    Support to AIT/AIV Planning

    -    Implementation of a Observation Satellite Concurrent Design Methodology

    -    End-to-End Providers Activities Coordination  and Verification (Partner Providers Identification, Offer Evaluation, Trade-off, Negotiation and Purchasing)

    -    Analysis and Validation of the Results issued by the Flight Segment Providers Activities (Mechanical Analysis, Thermal Analysis and Thermal Testing)

    -    Piloting of the Flight Segment Providers Mechanical Analysis and Testing Activities 

    -    Verification and Validation of the Satellite Design at System Level

    -    Verification and Validation of the FDIR/FMECA Analysis

    -    Identification of the Tool and the Methodology needed to perform the Thermal Analysis (ESATAN/ESARAD Environment)   

    -    Participation at the System Design Review (SDR) and at the Preliminary Design Review (PDR) of the Flight and Ground Segments

    -    Participation at the Deimos-1 Operation Planning, Satellite Control and Image Data Processing Workshop: Performing of TC/TM Upload/Download Operations, Mission Planning and Image Computing (Deimos-1 Ground Station, Valladolid, Spain)  

    -    Responsible for the activities of Software Survey and Evaluation needed to support the Company Development

    #         Technical background:

    -    System Engineering

    -    Requirement and Test Management

    -    Systems and Sub-Systems Analysis and Design

    -    Space Mission and Operations Analysis and Design

    -    Mechanical and Thermal Architecture

    -    Commercial Negotiation and Purchasing

     

    -    Software tools: Matlab, Scilab, STK-6/9, Savoir, ESA CDF-IDM tool, 3SL-CRADLE (»DOORS), MS Office (Excel, Word, Power Point), Redmine


     

    ARES S.r.l. - Safety, Management, Design (Casale Monferrato, Italy)

    < January 2011 – Mars 2011 (3 months)>

    Position:                          Aerospace Engineer

    Main Activities:              Support to Technical and Commercial Management to Develop the Aerospace Business of the Company

    #         Objectives:

    -    Support to Aerospace Project Management

    -    Contribution to Commercial Development in the Aerospace Business

    -    Support to Quality Management of the Company’s Clients

    -    Educational Support Production

    #         Achievements:

    -    Implementation of Training Project concerning the Aerospace Rules and Standards  in collaboration with Lufthansa Lufthansa Technik (Scope Statement Document, Technical and Economical Offer, Project Development Plan, Project Planning, GANTT)

    -    First Contact and Commercial Call to potential Clients

    -    Support to Quality Management and Certification

    -    Quality Auditing

    -    Support to Aeronautical Certification for Flight School and Maintenance Company

    #         Technical background:

    -    Aeronautical Quality and Certification

    -    Quality Management

    -    ISO 9001, 9100

    -    EASA Parts 21, M, 145, 66,147

    -    Commercial Development

    -    Project Management

    -    Education

     

    -    Software tools: MS Office (Excel, Word, Power Point), Open Project

     


     

    Bertin Technologies (Montigny-le-Bretonneux, France)

    Position:                          Space System Engineer (Internship + Engineer)

    Main Activities:              Space Mission and System Analysis and Design

    #         Objectives:

    -    Mission Analysis and Systems Design of a Hybrid Propelled Upper Stage Launcher Technological Demonstrator (ORPHEUS) in the frame of the CNES’s PERSEUS Project

    -    Space Mission and System Analysis and Preliminary Design

    -    Multidisciplinary Design Optimization (MDO) 

    -    Student Activities Management

    #         Achievements:

     

    1.   Project PERSEUS (Macro-projet ORPHEUS and HADES)

    -    Mission and System Requirement Definition of the ORPHEUS (Hybrid Propelled OTV Technological Demonstrator) Project

    -    Comparative Analysis and Preliminary Design (Trade-off) among different Earth Observation/Scientific  Missions (SSO, LEO, MEO) and Interplanetary Missions (Lunar Mission) in the frame of the definition of the ORPHEUS Demonstration Mission

    -    Feasibility Analysis

    -    Development of Mission Analysis Tools (Scilab and Excel Environments) validated through STK, GMAT and other Space Trajectory Commercial Tools

    -    Lunar Mission Analysis and Design (Optimal Trajectory, deltaV Budget, Optimal Lunar Transfer and Injection Maneuvers)

    -    Analysis and Design of a Scientific Mission in the Van Allen Belt (Optimal Trajectory, deltaV Budget, Optimal Transfer Maneuvers)

    -    S/C to G/S Contact Windows Analysis

    -    Preliminary Operations Design

    -    Spacecraft Configuration Trade-off

    -    Preliminary Design (Phase 0) of the ORPHEUS Technological Demonstrator (Sizing and Design of all the Spacecraft Subsystems: Structure & Mechanisms, Thermal Control System, Hybrid Propulsion System, Power System, AOCS, TC/TM, C&DH)

    -    Development of Software Tools for the Spacecraft’s Sub-Systems Design and Sizing (Scilab and Excel Environments) 

    -    Hybrid Propulsion System Detailed Sizing and Design (Nozzle Design, Tank Design, etc.)

    -    Detailed Performance Evaluation of the Hybrid Propulsion System (Available deltaV, Thrust Profile, Oxydant/Fuel Ratio, Isp)

    -    TC/TM Subsystem Performance Evaluations (Download/Upload Data Capabilities, Link Budget)

    -    ORPHEUS Mechanical and Thermal Architecture

    -    Spacecraft Shielding Design

    -    Van Allen Belt Radiation Estimation and Spacecraft Sub-Systems Impact Analysis

    -    Mass Budget and MCI Definition

    -    ORPHEUS Preliminary CAD/CAO Modeling

    -    Perseus Launcher Preliminary Configuration CAD/CAO Modeling

    -    Launcher System Trade-off for ORPHEUS (Piggy-back Payload)

    -    Implementation of a Multi-Disciplinary Optimization Process to design a Sounding Rocket in the frame of the Spacecraft Design Multi-Software Platform HADES.

    -    Coordination of the Activities of some Students involved in the PERSEUS Project

    -    Intervention to PERSEUS Seminar (Paris, France): Presentation of the ORPHEUS Mission and Design

    -    Participation at the CNES Sounding Rockets Launch Campaign (La Courtine, France) 

    -    Scope Statement Document, Requirement Documents, Technical Notes and Presentation (French and English) Production

    -    Article writing « ORPHEUS – ORbital demonstrator Project with Hybrid rocket Engine for Upper Stage nanosat launcher – Mission Analysis & Preliminary Design », Presented at the Symposium PERSEUS (2009) and at the « 7th PEGASUS-AIAA Student Conference (Polytechnic University of Turin, Italia) » (Avril 2011)

    -    University Final Project Production based on ORPHEUS Mission and System Analysis and Design

     

    2.   Project ALDEBARAN (Launcher System)

    -    Support to the Launcher System Design

    -    Launcher Parachute System Sizing

    -    Preliminary CAD/CAO Modeling of the Launcher

    -    Writing of ppt Presentations (English)

     

    3.   Project ExoMars

    -    Mission Requirements Analysis of the Rover

    -    Writing of the Technical Offer for ESA

    #         Technical background:

    -    Space Mission and System Analysis and Design

    -    Launcher System Design

    -    Hybrid Propulsion System Design

    -    Mechanical and Thermal Architecture

    -    Multi-disciplinary Optimization

    -    CAD/CAO

     

    -    Software tools: Scilab, Rinocheros (CAO), modeFRONTIER, MS Office (Word, Excel, Power Point), C, AGI STK-8, ESA STA, NASA GMAT, JAQAR Astrodynamics

    YES-3 Project – ESA & Politecnico di Torino (Italy)

    Position:                          Polytechnic University of Turin YES-3 Student Team Leader

    Main Activities:              ESA YES-3 (Young Engineer’s Satellite Project)

    #         Objectives:

    -    YES-3 Satellite Mission and System Preliminary Design

    #         Achievements:

    -    Solar Sail Feasibility Study and Preliminary Mission and System Design

    -    Inflatable Re-entry Capsule Feasibility Study and Preliminary Mission and System Design

    -    Intervention at the « Workshop ESA – Young Engineer’s Satellite Project (YES 3) – 1st Hellenic European Student Space Science and Technology Symposium » in Patras, Greece (October 2006)

    #         Technical background:

    -    Space Mission and System Analysis and Design

    -    Student Activities

    -    Team Work

    -    ESA Standard ECSS

     

    -    Software tools: MS Office (Excel, Word, Power Point)


     

    European Space Agency, ESA-ESTEC (Noordwijk, Hollande)

    < Internship Mars 2005 – August 2005 (5 months)>

    Position:                          Aerospace Structural Test Engineer (Internship)

    Main Activities:              Stress-Corrosion Cracking (SCC) testing on riveted joints for space application (ISS-Columbus)

    #         Objectives:

    -    Evaluation of the Effects of the Stress-Corrosion Cracking (SCC) on the Riveted Aluminum Joints used for the ISS-Columbus Module Structural Assembly

    #         Achievements:

    -    Implementation and Performing of the SCC Test

    -    Specimens Instrumentation

    -    Tensile Test

    -    Metallographic Analysis

    -    Fractography Analysis using the Electronic Microscope (SEM)

    -    Reporting Activities (ESA format)

    -    University Final Project Report 

    #         Technical background:

    -    Laboratory Activities (Chemistry and Mechanics)

    -    Mechanical Testing

    -    Quality

    -    ESA Standard ECSS

     

    -    Software Tools: MS Office (Word, Excel, Power Point)

    -    Laboratory Tools: Scanning Electron Microscope (SEM), Optical Microscope, SCC Testing Machine, Tensile Test Machine

     


        

    Training

    *      October 2010   Master Degree of Aerospace Engineering, Politecnico di Torino (Turin, Italy)

     

    *      A.A 2007/08      ERASMUS Project: 3rd Year at the French Engineering School ISAE-ENSICA (Toulouse, France) – Specialization: Space Systems

     

    *      July 2006          Bachelor Degree of Aerospace Engineering, Politecnico di Torino (Turin, Italy) – Specialization: Aircraft Maintenance EASA Part 66

     

    *      July 2002        High School Leaving Certification in Air Navigation, Aeronautic Technical Institute I.T.A. «F. Baracca » (Novara, Italy)

     

    *      2001               Private Pilot License (PPL), Aero-club « N.S.I. Palli » (Casale Monferrato, Italy)  

     

     

    Languages

    *      Italian              Mother Tongue

     

    *      English            Fluent         

     

    *      French               Fluent

     

    *      Spanish             Advanced


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2020 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2020 Spacelinks
    Web Analytics