Latest Space News
Thu, 18 Jan 2018 08:17:07 +0000
Sending data to and from different spots on Earth is big business for satellite operators, but Cloud Constellation sees a lucrative opportunity to offer satellites as the ultimate cloud storage solution for sensitive data. SpaceNews.com
Thu, 18 Jan 2018 00:54:25 +0000
There are many valid critiques of U.S. President Donald Trump’s new direction for NASA. Few, if any, would be new. But Russian government officials saw an opportunity for domestic attention and took a stab at it. SpaceNews.com
Wed, 17 Jan 2018 22:55:38 +0000
SpaceX reiterated at a congressional hearing Jan. 17 that its Falcon 9 rocket performed as expected on its most recent launch, despite swirling questions about the potential failure of the classified Zuma mission. SpaceNews.com
Wed, 17 Jan 2018 22:13:32 +0000
“What are we going to do about deterrence in space?” That is a question the administration should answer in the new strategy, said CSIS analyst Todd Harrison. SpaceNews.com
Wed, 17 Jan 2018 18:56:26 +0000
As the two companies developing commercial crew systems reiterated that they were on schedule to carry out test flights later this year, a government analysis of schedules concluded those vehicles may not be certified to carry NASA astronauts until late 2019 or early 2020. SpaceNews.com
Wed, 17 Jan 2018 16:03:18 +0000
With no budget deal in sight to avert a Friday government shutdown, a visibly frustrated Mac Thornberry, chairman of the House Armed Services Committee — and a vocal champion of bigger military budgets — called out his congressional colleagues for putting political agendas ahead of national security SpaceNews.com
Wed, 17 Jan 2018 12:12:59 +0000
Effective Space, a U.K.-headquartered company developing spacecraft to extend the life of communications satellites, announced Jan. 17 that it has signed its first contract with an undisclosed customer. SpaceNews.com
Wed, 17 Jan 2018 00:07:31 +0000
The Air Force will establish a three-star vice commander of Air Force Space Command to be located in the national capital region. SpaceNews.com
Tue, 16 Jan 2018 22:38:34 +0000
Virgin Orbit, which expects to debut the air-launched LauncherOne rocket by summer, signed a contract Jan. 16 with GomSpace to send eight nanosatellites into orbit next year to track airplanes and ships. SpaceNews.com
Tue, 16 Jan 2018 22:11:26 +0000
European launch provider Arianespace expects to conduct just 23 more Ariane 5 launches before the next-generation Ariane 6 becomes its primary rocket. SpaceNews.com
Tue, 16 Jan 2018 12:00:24 +0000
The new president of Canadian space technology company MDA says he sees opportunities for growth both within the country and beyond, while maintaining the company’s Canadian roots as part of a larger, and increasingly American, company. SpaceNews.com
Mon, 15 Jan 2018 20:44:32 +0000
The SBIRS satellites are equipped with powerful scanning and staring infrared sensors that collect data for use by the U.S. military to detect missile launches. SpaceNews.com
Mon, 15 Jan 2018 18:55:15 +0000
The plan is to shift the current ground software architecture to an open-systems platform that the Air Force would own and update with new technology as it becomes available. SpaceNews.com
Mon, 15 Jan 2018 12:00:22 +0000
The successful launch of an Indian Polar Satellite Launch Vehicle (PSLV) Jan. 11 marked not just the return to flight of the rocket but also major achievements for several of the companies with payloads on board the vehicle. SpaceNews.com
Fri, 12 Jan 2018 21:37:32 +0000
China Great Wall Industry Corp. landed a new satellite order Jan. 11 on the back of a bilateral meeting between Chinese and Cambodian officials that included an agreement to increase trade between the countries. SpaceNews.com
Fri, 12 Jan 2018 20:43:46 +0000
An independent safety panel recommended NASA not certify SpaceX’s commercial crew system until the agency better understands the behavior of pressure vessels linked to a Falcon 9 failure in 2016. SpaceNews.com
Fri, 12 Jan 2018 15:58:11 +0000
Virgin Galactic conducted its first test flight of its SpaceShipTwo suborbital vehicle in more than five months Jan. 11 as the company prepares to begin powered test flights of the vehicle. SpaceNews.com
Fri, 12 Jan 2018 14:55:04 +0000
The PSLV lifted off from the Satish Dhawan Space Centre at 10:59 p.m. Eastern and placed into orbit a Cartosat 2 imaging satellite and 30 secondary payloads. SpaceNews.com
Fri, 12 Jan 2018 12:09:38 +0000
Rocket Lab announced Jan. 11 it plans to make another attempt to launch its Electron small rocket on its second mission later this month. SpaceNews.com
Thu, 11 Jan 2018 22:59:37 +0000
Pentagon officials on the Zuma space mission: 'We're not going to be able to give you any more information' SpaceNews.com
More space news...
18327 cvs - 1027 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Process Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:12-11-2012
     Last Modified:09-03-2014 (04:06)
    Job information
     Current job:Process Engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:within 3months
     Industry:Satellite Manufacturers and Subcontractors, Launch Systems, Consulting/Engineering Services, Space Tourism
     KeywordsAvcoat, Heatshield, NASA Orion, Lockheed Martin, Re-entry Vehicles, space, 3D CAD Design • Manufacturing • Good Leadership Skills Microsoft Office Suite • Data Analysis • Cost Saving Projects • Strong organization skills Interpersonal/Team ski
    CV

    Mechanical engineer with excellent manufacturing and design capabilities.  Great communication and networking skills which will save Wyman Gordon over a million dollars a year.  High success rate in cost saving projects and cost effective solutions.  Commended for hard work, communication skills, and ability to work well in high pressure situations.  A willing and quick learner enthusiastic to jumpstart career in the space exploration  industry.

     

    3D CAD Design • Manufacturing • Good Leadership Skills

    Microsoft Office Suite • Data Analysis • Cost Saving Projects • Strong organization skills

    Interpersonal/Team skills • Development of Manufacturing and Assembly Processes • Ability to multi-task

    Experience

    Wyman-Gordon, Grafton, MA                                   2013-Present

    Process & Continuous Improvement Engineer (Weld, CNC, Stockcutting, Raw Material Conversion, Industrial Etching, and Open Die Forge)

    Sole engineer of six different departments while reducing costs and improving manufacturing processes throughout the facility.   Analyzed data acquired to perform design and manufacturing changes.  Participate in material review board meetings to determine cause and develop viable corrective actions.

    • Implement a 3D scanning system that will reduce rework by a third, saving over a million dollars a year.
    • Designed communication system for the forge presses that reduced waiting time to a fourth of the time saving over a hundred thousand dollars a year
    • Averted multiple parts destined to be scrap by creating and executing rework instructions effectively

    Design Engineer

    Special project assignment to help design land based turbines for GE.  Designed analyzed stress on pre-heat treat machine shapes, forging dies, test plans, and special tooling for the project.  Quickly executed a design for quote forging that minimized the material significantly under the expected amount.

    Textron Defense Systems, Wilmington, MA                                            2012-2013

    Engineering Co-Op

    Improved and designed parts of the manufacturing process for the thermal protection system in the NASA Orion Program.  Determined the fastest and most cost effective way to perform steps of the manufacturing process. 

    • Created a cost effective method to classify Avcoat (main component of the heat shield)
    • Tested and developed the abasing process and equipment for the Heat Shield using a new, undeveloped vacuum blasting system

    Wyman-Gordon, Grafton, MA                                                     2011-2012
    Engineering Co-op

    Designed and modified forging parts, processes, and dies per the product engineer’s request.   Prepared and analyzed simulations for part yield and stress analysis.

    • Created and designed a tail wing forging for Boeing from start to finish, analyzing simulations to determine any modifications and improvements

    Education

    University of Louisville, JB Speed School of Engineering- Louisville, KY                                                                 

    Pursuing a Master of Science in Engineering Management                                        2015

    Northeastern University, College of Engineering- Boston, MA                                       

    Bachelor of Science in Mechanical Engineering Candidate                                           2013

    Research

    Northeastern University Laboratories

    • Determined the best method for repairing broken honeycomb on the hull of ships
    • Calculated the ideal mixture for creating wood composite flutes by brittleness and yield strength

    Skills

    Applications: Solidworks, Minitab, Edgecam CNC Software, Datamyte, Microsoft Office: Word, Excel, Powerpoint.

    CAD:  Certified in Solidworks, Catia

    Community Service

    Alternative Spring Break                                                                                                                                         

    • Leader of a group to donate furniture to the poor through the charity A Wider Circle  

    Oxford Associates                                    

    • Assisted in facility renovations for men with drug and alcohol addictions

    Interests & Hobbies

    • Strong interest in space exploration, flight and transportation engineering advancements
    • Enjoy snowboarding, exercising, playing sports, watching movies, and searching for career opportunities


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics