RELEVANT EXPERIENCES DETAIL
2015 - Rocket Lab USA
Test/research engineer on the Electron Launcher program. 3 months project in expatriation.
The American company RocketLab USA has the objective of opening access to space: it develops an innovative concept of space launcher, Electron.
It allows to launch satellites for very competitive cost. Electron allows to respect commitments of cost and launch frequency. The flight of the prototype of Electron is scheduled for 2016. Electron is the first prived launcher to go on the moon, under contract with the american company Moon Express and NASA.
Objectives: Experimental Research Flight. Study scientifically the behavior of the launcher during its flight. Includes cryogenic topics. This work consists in defining all the measurements to be done during the flight and develop the sensing system to do it.
Method: Work in the vehicle team composed of 15 people, mainly anglophone.
Results: study of concept of the experimental research flight and design of the sensing system
* RocketLab: http://www.rocketlabusa.com
2014 - von Karman Institute Project
Partnership with Hydra-Fab and the NATO in the context of a Diploma Course project. 11 months project.
Objectives: development of a method to optimize performances & reliability of control algorithms for extremely nonlinear systems. Application case: hydraulic tilting unit of Bombardier & Virgin high speed trains.
Method: experimental characterization of the tilting system. Research of an innovative solution applicable in an industrial context.
Results: development and validation of the prototype of an algorithm to control the hydraulic tilting system.
* von Karman Institute for fluid dynamics: https://www.vki.ac.be/index.phpoption=com_content&view=category&layout=blog&id=13&Itemid=47
2012 - von karman institute project for the European Space Agency (ESA)
Cassini-Huygens is a spatial spacecraft jointly realized by the NASA, ESA and ASI. In june 2012, the ESA has delivered a contract named ‘‘Huygens Performance Validation and Lessons learnt’’. The spin direction of the Huygens probe during the subsonic phase of the entrance in the Titan atmosphere was not the one expected. One task of the ESA contract aims to understand this problem. 5 months project.
Objectives: clearly identify the reasons of the unexpected probe spin rotation. It will give a feedback for the future spatial exploration missions. Project in collaboration with one engineer and one doctor of the aerospace department of the von Karman Institute.
Method: problem analysis with a rational approach (by the equations). Formulation of plausible assumptions. Validation by tests in the wind tunnel of the von Karman Institute. These tests are made on the scale 1 prototype of the Huygens planetary probe.
Results: my work in this project has been advanced to the problem analysis with the equations. The results of this work will be used by one engineer of the von Karman Institute to continue the project. This project was extremely fascinating.
* Nasa - Cassini-Huygens : http://www.nasa.gov/centers/jpl/missions/cassini.html
2012 - Engineer studies final project
« Office National d’Études et de Recherches Aérospatiales», ONERA Lille center
Feasibility of a lift measurement on a nano drone artificial wing inspired by insects : ONERA Remanta project. 5 months project made in the military-measurement-hydrodynamics-diversification unit.
Objectives: to characterize the aerodynamic performances of a latest generation of a biomimetic wing, particularly the lift and drag forces (order of magnitude: micro-Newton). Project in collaboration with a doctor in mathematics, mechanical engineer, researcher at ONERA.
Method: test bench development and optimization for the wings characterization. The test bench is financed by the EADS foundation. Measurement technology calibration. Processing algorithms development and validation. Problematics analysis. Interpretation of results..
Results: carrying out of the test on the prototype to evaluate its aerodynamics. Result curves generation. Project overview to organize a test programme on a variety of prototypes.
2008 - Higher Technician in Mechanical Engineering. Canada Quebec - hydrep.inc
Training course in a 50 people industrial company specialized in fluid mechanics (hydraulics). 10 weeks project.
Objectives: design and manufacture part of the piloting system of a milling unit fabricating turboreactor rotor blades.
Method: to study the concept design method in the project’s fluid and solid mechanics problems.
Results: participation to the implantation of the system at Pratt & Whitney’s Montreal.
2007- Higher Technician in Mechanical Engineering. France - LH Aviation
Catia V5 modeling of the LH-10 Ellipse, innovative plane prototype. 6 months project. 20 people.
Objectives: to create a 3D plane model, with the Catia software. To generate the production drawing and to get a numerical model. It offers a possibility of simulating of the aircraft system. Studied in collaboration with the chief engineer.
Method: work implemented in the studies and methods team. Assessed overall problem, suggested numerical model.
Results: first drawing sets contracted. Dynamic study, with the model, of the aerodynamic compensator implanted in the horizontal plane.
* LH-Aviation : http://www.lhaviation.com/
2007- Technology university degree studies Final project - Canada Quebec- Hydrep.inc
Study of a mechanical power transmission implanted in the hydraulic tilting system of Hydrep.inc. 10 weeks project.
Objectives: to redesign a mechanical power transmission device subjected to severe cyclic loads where dynamic of collision intervenes.
Method: to study cyclic mechanisms which lead to the device destruction. To take into account those criteria in the design.
Results: new device defined. Proposition of a test bench procedure which permits the lifetime validation.
Born and raised in Africa: 18 years, Niger, Congo, Gabon and Madagascar
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!
2021 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
|6 months - Silver||1950 euros||convert|
|12 months - Gold||3200 euros||convert|
If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at email@example.com. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing firstname.lastname@example.org. Accounts found not to be in compliance will be deleted.