Latest Space News
Thu, 14 Dec 2017 16:57:56 +0000
SpaceIL, the Israeli team in the Google Lunar X Prize competition, says it needs to raise $7.5 million in less than a week in order to complete its lander and retain its launch contract. SpaceNews.com
Thu, 14 Dec 2017 11:00:27 +0000
NASA’s Dawn mission to the main asteroid belt, granted a second extended mission earlier this year, will end later next year after a final set of close-up observations of the dwarf planet Ceres. SpaceNews.com
Thu, 14 Dec 2017 01:59:27 +0000
Lockheed envisions many uses for artificial intelligence in space, such as being able to quickly detect changes in satellite performance and in the environment. SpaceNews.com
Wed, 13 Dec 2017 18:53:09 +0000
The Senate Commerce Committee advanced the nomination of Barry Myers to be the next administrator of NOAA to the full Senate despite concerns by the committee’s Democrats about potential conflicts of interest. SpaceNews.com
Wed, 13 Dec 2017 10:08:47 +0000
A Japanese company planning a series of robotic missions to the moon announced Dec. 13 that it has raised more than $90 million in one of the largest Series A funding rounds for any emerging space venture. SpaceNews.com
Wed, 13 Dec 2017 08:47:31 +0000
Blue Origin said it carried out a successful test flight of a new version of its New Shepard suborbital vehicle Dec. 12. SpaceNews.com
Wed, 13 Dec 2017 04:06:57 +0000
Arianespace performed its eleventh and final launch of the year today, sending four Galileo European navigation satellites into medium Earth orbit. SpaceNews.com
Tue, 12 Dec 2017 20:39:55 +0000
The new decadal survey for Earth science research will likely be unveiled in early January, slightly later than previously planned. SpaceNews.com
Tue, 12 Dec 2017 20:17:22 +0000
The U.S. Federal Communications Commission on Dec. 5 okayed the first part of a satellite-servicing mission Orbital ATK’s Space Logistic subsidiary has with Intelsat, saying the servicing vehicle can execute “rendezvous, proximity operations, and docking with the Intelsat-901” satellite while in a graveyard orbit. SpaceNews.com
Tue, 12 Dec 2017 17:20:18 +0000
Tucked into the details of the 2018 National Defense Authorization Act that President Trump signed into law Dec. 12 is a long overdue recognition of the first American astronauts who were lost in service to their country while practicing for a mission. SpaceNews.com
Tue, 12 Dec 2017 11:41:15 +0000
Rocket Lab scrubbed a launch of its Electron small launch vehicle Dec. 11 after an abort just two seconds before liftoff. SpaceNews.com
Tue, 12 Dec 2017 03:55:05 +0000
President Trump’s new space policy directive calling for American astronauts to return to the moon is welcome and encouraging news. SpaceNews.com
Tue, 12 Dec 2017 03:04:42 +0000
On the eve of the first launch of a reused Dragon capsule on a Falcon 9 with a reused first stage, both NASA and SpaceX said they were comfortable with the level of risk involved with the mission. SpaceNews.com
Mon, 11 Dec 2017 22:16:34 +0000
President Donald Trump signed an order Dec. 11 formally directing NASA to send humans back to the moon, but provided no information on schedules or budgets for such an initiative. SpaceNews.com
Mon, 11 Dec 2017 11:04:22 +0000
President Donald Trump is scheduled to sign his administration’s first space policy directive in a White House ceremony Dec. 11, one that may formally direct NASA to send humans back to the moon. SpaceNews.com
Sun, 10 Dec 2017 21:03:54 +0000
China Great Wall Industry Corp. launched Algeria’s first telecommunications satellite, Alcomsat-1, aboard a Long March 3B rocket at 11:40 a.m. Eastern to geostationary transfer orbit, the Algerian press agency APS said today. SpaceNews.com
Sun, 10 Dec 2017 01:20:41 +0000
An airspace closure notice published by the Federal Aviation Administration Dec. 9 suggests Blue Origin is preparing to resume test flights of its New Shepard suborbital vehicle after a hiatus of more than a year. SpaceNews.com
Fri, 08 Dec 2017 21:23:41 +0000
More than a year after suffering significant damage in a Falcon 9 explosion, a Florida launch pad is ready to return to service, incorporating improvements that will allow a higher flight rate. SpaceNews.com
Fri, 08 Dec 2017 20:55:51 +0000
Tethers Unlimited, one of three companies NASA selected Dec. 7 to build a prototype space-based 3-D printer called FabLab has grown dramatically in recent years due to interest among government and commercial customers in this type of work. SpaceNews.com
Fri, 08 Dec 2017 20:44:31 +0000
If the U.S. Federal Communications Commission wants a more accurate database of C-band satellite dishes, it should make the process of registering those dishes less expensive and time-consuming, fleet operator SES said Dec. 6. SpaceNews.com
More space news...
18256 cvs - 951 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Design Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:26-02-2013
     Last Modified:13-01-2014 (06:46)
    Job information
     Current job:Design Engineer
     Employment Term:Either
     Job location:Anywhere
     Date available:within a month
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Consulting/Engineering Services, Space Tourism
     KeywordsDesign Engineer,CATIA V5,NX,Antenna design,structure design,composite design,optomechanics
    CV

    WORK EXPERIENCE:

     

    08/ 2013 – Nowadays  Space company UK (Permanent)

    Interface Manager Engineer

    Working for the kit provider team. My scope is to manage the interfaces of all the payloads and equipments attached to the structure of the satellite. The satellite is a project of the ESA created for sun observation. The interfaces must be designed in a way that different fixings allow the right adjustment capabilities. I report to a department manager but I'm responsible for this space ships. I have an extra attribution that is to implement the new zero paper policy creating 3D drawings equivalent to the current 2D drawings.

     

    03/ 2013 – 8/2013                 Altran Germany (Outsourced at Kayser-Threde, Munich)

    Satellite Telescope Design Engineer  

    Responsible of the detailed design of the Optical Bench Assembly for the Flexible Combined Imager Telescope of the Meteosat Third Generation Satellite. Is an ITT for the ESA. My scope is to redesign the current proposal to make it feasible and design most of the parts that currently are just envelope volumes. It's a CFRP sandwich panel with big metallic rings inserted to accommodate the different mirrors of the telescope. Of course the precision and the thermal behavior is a must in the project.    

     

    01/ 2013 – 03/2013               YACHT (Outsourced at ASML in Eindhoven, the Netherlands)

    Design Engineer  

    Hired to work in the Opto-mechanics team as design engineer in the NXE UV 3000, the first vacuum lithography machine. The company is world leader in lithography machines. These machines are responsible of printing more than the 80% of the microchips around the world. This machine accelerates at 150 Gs hundreds of times per hour and has a position accuracy of 19nm being one of the most precise and fastest machines in the world. I was placed provisionally in the maintenance design department and helped in the design of stepladders, stairs etc. I received an  offer from Altran Germany for a really interesting project and I decided to move forward.  

     

    10/2010 – 12/2012                                TTI Norte (Outsourced at EADS ASTRIUM CASA Espacio in Madrid, Spain) 

    Satellite Antennas Mechanical Design Engineer

     

    Design responsible of high precision components (feeders) of a KA-band satellite antenna (AMAZONAS 3)

    Reporting to a team leader that managed three other antennas and working together with a the RF, thermal and stress teams.

    The assembly was a cluster of eleven small complex-shaped metallic horns (feeders) with a rear polarizer that emit and receive microwaves from earth.

     My role was to create a new design solution for the feeders structure. A high precision design to guarantee the right pointing of the antenna and able to withstand the thermal distortion in space, while keeping the pointing in tolerance and also able to withstand the accelerations during satellite launch. All with strict weight and space restrictions.

    I completely redesigned the structure with the help of the other teams, changing carbon fiber panels into metallic three-legged self-sustained  thermal-isostatic horns with a careful selection of materials (titanium, aluminium, invar and steel).

    The model passed the full tests and now is flying.

    After that I´ve designed two 2.5 meters diameter carbon fiber reflectors that are being built. The reflectors are made of a sandwich with an aluminium honeycomb core and with carbon fiber skins. The reflectors must be really light, must have a good thermal behavior and must withstand the acoustic and random tests because launch frequencies affect too much its structures. The design is basically a parabolic dish with rear ribs bonded creating an structure that makes it stiffer and that transfers the loads to the interface points with the satellite. Even if each reflector is tailored, it is the more standard product of the company.

     

    01/ 2011 - Nowadays (Part-time job) MOTORPRESS IBERICA (Madrid, Spain)

    LAMOTO2 open design project Technical Director / Editor www.lamoto2.es

     

    Technical director and lead designer of a Moto2 racing motorcycle for the Spanish championship.

    We design and build a motorcycle in cooperation with the readers of La Moto, the bestseller bike magazine in Spain. The bike is an avant-garde design that applies unconventional steering and suspension solutions based in the patents I registered in previous designs.

    As technical director I lead the full mechanical development, designing and calculating of parts and work via a website with other engineers (readers) focused in simulation, aerodynamics and performance.

    As editor I publish two articles every month. A section about the MOTO2 project and the Hi-Tech section about advanced materials, coatings, parts... that are being used in the racing motorcycles.

     

    12/2009 - 10/2010                ABGAM (SEGULA GROUP)

    Structure Design Engineer Section 19.1 AIRBUS A350 XWB

     

    Design of structure parts (composite and metallic). 

    Design of door fittings and electrical bonding.

    Creating the firewall design principles, and also the package frontier drawings with the maintainability and safety requirements.

     

    10/2008 - 10/2009                                Freelance

    Project Manager, Mechanical Design Engineer.

     

    Electric folding scooter:(Spanish patent as co-inventor Reg. Number: P200931144). 

    In cooperation with the automatics department of the Miguel Hernandez University, Spain.

    Project management, design, calculation and simulation of a 250 Watts prototype scooter.

    The user can carry the bike as a trolley when folded for a perfect intermodal use.

     

    Portable beacon device for road safety:(Client: Rodal ingenieria)

    Project management, design, calculation, and mold design cooperation.

    Candidate to the Spanish most innovative prize in road safety 2008/2009.

     

    Feasibility study of a Virtual Reality Haptic Exoskeleton:(Client: M2GRP SL / Dylvian)

    Design and calculation of the first approaches to create an avant-garde exoskeleton inside a 3 DOF sphere for virtual reality games.

    Resources, schedules and cost estimations in order to obtain investors.

     

     

    10/2006 - 08/2008                Vinci Innovaciones Tecnologicas (a small innovating company)

    Project Manager / Design Engineer (Motorcycles R&D)

     

    Design and build of an alternative suspension and steering BMW-based prototype motorcycle.

    International patent as inventor (Reg. Number: WO 2010/034857 A1)

    Whole project management from hand sketching to final race test. Team leader (3 members team)

    Framework and suspension design, extensometry tests, 2D simulations, FEM calculations, Telemetry…

     

     

    07/2005 - 01/2006                Vinci Innovaciones Tecnologicas (a small innovating company)

    Project Manager / Design Engineer (Motorcycles R&D)

     

    Design and build of a low cost alternative suspension and steering prototype scooter.

    Project management. Team leader (2 members team)

    Framework and suspension design, 2D simulations, FEM calculations.

    BMW liked the idea and the company found the investors to build the BMW-based prototype.

     

    09/2003 - 10/2004                Andine Manutencion S.L.      Design Engineer Internship

     

    Helping in the design of custom machinery for shipping and pharmaceutical companies and creating plant layouts and renderings as CAD responsible.

    EDUCATION:

     

    2004 - 2006            Master in Transportation Design

    ELISAVA Design School (Barcelona)

     

    1997 - 2010            Bachelor in Industrial (Mechanical) Engineering

    Universidad Miguel Hernandez ,Elche (Spain)

     

    2000 - 2001            Scholarship: Erasmus, 4th year of Mechanical engineering

    Polytechnic of Torino (Italy)

     

    2012 (24 hours)      MasterCAM 3 axis milling

    CNC Machining.

     

    2007 (20 hours)      Extensometry

    Gauge installation, data acquisition and interpretation

    HBM Iberica, Madrid

     

    Summer 1996        Scholarship: Eurocourses

    Introductory English, Chester (England).

    Generalitat Valenciana

     

    January 2013          Intensive NX training (Siemens)

     

                                   and others like (Cleaning room access, High voltage, CO2, H2, Vacuum Design…) 

     

     

    MECHANICAL DESIGN/ANALYSIS TOOLS

     

    Catia V5 (Expert, over 5 years) Sketch, part, assembly, sheet metal, kinematics, FEM… with Smarteam PDM system.

    Unigraphics (NX 7.5 and 8.5) Medium level after a 40 hours intensive training at Siemens (The Netherlands)

    Working Model (Expert, over 5 years)

    AUTOCAD (Expert, over 5 years)

     

     

    PUBLICATIONS/PATENTS:

     

    International patent # WO 2010/034857 A1 (Steering and suspension assembly for the front train of a two-wheel vehicle)

    Spanish patent # P200931144 (Electric folding scooter and folding process) 

     

    From 01/2011 Two fixed sections in LA MOTO (The bike) magazine.

     

                    -Hi-Tech 

                    -LA MOTO2 Project

     

    LANGUAGES:

     

    Spanish: Mother tongue

    Catalan: Mother tongue

    English: Fluent

    Italian: Fluent

     

    DESIGN SKILLS:

    Concept Design, 3D Modeling (Alias Studio), Rendering, 2D Rendering (Photoshop), Hand sketch drawing


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £350 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2017 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2017 Spacelinks
    Web Analytics