2007-Present University of Cyprus Nicosia, Cyprus
PhD candidate Electrical Engineering expected Dec 2013. Current GPA 9.5/10
2003-2005 Polytechnic University Brooklyn, NY, USA
M.Sc. Electrical Engineering obtained December 2005. GPA 3.35/4.00
1997-2001 The Pennsylvania State University University Park, PA, USA
B.Sc. Electrical Engineering obtained August 2001. GPA 3.55/4.00
A. Sep 2007 – Present University of Cyprus Nicosia, Cyprus
Graduate Research Fellow ( RF / Microwave)
§ Specified and designed a 2.4 GHz telemetry data link used to transmit 80Mbps of raw SAR data from a small manned aircraft at a maximum distance of 5Km.
§ Designed the RF blocks of the Transmitter and receiver, down to the PCB and component level (LNA’ s, Power Amplifiers, VCO’ s, AGC’ s, filters).
§ Fabricated, tested and integrated the RF sub-units into machined aluminum housings.
§ Interfaced with partners from Fraunhofer FHR and IAF (Germany), Propatria Electronics (Hungary) and Warsaw University (Poland) and provided various test reports and measurement data for the telemetry link performance. Organized design reviews and formal progress reporting meetings.
§ Specified and designed a novel, broadband dipole antenna array operating at the DVB-T band which was used for the successful demonstration of a Passive, Multistatic ISAR system in cooperation with Indra Systemas and University of Alcala (Spain) and CNIT (Italy).
§ Performed a series of full-wave EM simulations (in HFSS) to investigate the antenna tradeoffs and decide on which type of antenna to use for the best impact on system performance.
Design and Implementation of a Novel Wireless Receiver Chain Using Metamaterial Quad Band Devices
§ Created a new design methodology for the fabrication of quad-band microwave metamaterial devices. This methodology was then used to design and fabricate a quad-band receiver chain consisting of a coupler, mixer and antenna, to demonstrate that metamaterial devices can be used for multiband systems with significant hardware and cost savings.
Super-resolution microwave imaging with metamaterial lenses
§ Fabricated the first metamaterials ever built in Cyprus using state of the art PCB fabrication facilities and designed, prototyped and tested a microwave quad-band power divider using Negative-Refractive-Index Transmission-Line unit cells.
B. Aug 2001 – Dec. 2006 ARTEMIS Inc. Hauppauge, NY, USA
RF/ Microwave Design Engineer
Participated in the following space programs:
Aquarius (NASA/ JPL) - Hydros (NASA) - Alpha (Lockheed Martin Co).
Participated in the following defence and scientific programs:
Global Hawk (Raytheon Systems Company)- ASTOR (Raytheon Systems Ltd-UK) - TIER II+ (Raytheon Systems Company) - UAVSAR (NASA/ JPL)
§ Designed, prototyped and tested RF blocks such as amplifiers, LNA’s, filters, switches, PLL’s, diplexers and dividers for use in Receivers, Upconverters and STALO’s utilized in SAR radar, radiometer and scatterometer subsystems (HF-band to X-band) on Unmanned Aerial Vehicles (UAV’s), spacecraft and satellites.
§ Integrated RF blocks into subsystem level units for radar subsystem units and overlooked the production, tuned and tested a big number of Receivers, Upconverters and STALO’s employed in UAV’s.
§ Wrote Acceptance Test Procedures for radar subsystem units, reviewed Specifications and Module Design Descriptions for these subsystems and developed the documentation necessary to take projects from the design phase to prototyping, production, testing and delivery to the customer.
§ Participated in Design Reviews and reported to the President on major issues and interfaced with customers and reviewed projects for future satellites and the next generation of airborne systems.
§ Overlooked the production, inspected and tested a Signal Distribution Unit for a Government satellite and supported customers after delivery of product in the proper operation of the systems.
§ Set up the company’s Quality System, including drafting all the Quality System documentation and led the company through a successful ISO 9001:2000 certification in an 11-month period as the ISO Management Representative of the company.
C. Aug 1998 – May 2000 Pennsylvania State University University Park, PA, USA
Transmitter Group Leader
Participated in the following sounding rocket programs: SPIRIT, SPIRIT II, SPIRIT III (ESPRIT)
§ Interfaced with scientists from NASA to specify the requirements for the rocket instruments and acted as the advisor to students for the SPIRIT III project.
§ Prototyped, built and tested a 2.3 GHz transmitter for the joint NASA and PSU payload launched successfully in May 2000 on a Nike-Orion sounding rocket to perform measurements in the upper Mesosphere and integrated transmitter with the rest of the payload at NASA’s Wallops Flight Facility, in Virginia, USA.
D. May 1999 – Dec 1999 Prediction Systems Inc. Spring Lake, NJ, USA
§ Created a communications simulation using the company’s GSS software for optimal time slot allocation for the Military Link-16/ JTIDS radio used by the armed forces.
§ IPC-A-610C Certified Class A Instructor (Inspection of electronic assemblies)
§ IPC Static Electricity Course Certified
§ IPC-J-STD-001C Certified (soldering)
Professional software packages
§ HFSS, Microwave Office, MATLAB, AutoCAD
Other Professional experience
§ Networking- Cisco CCNA, Juniper JunOS MPLS, JunOS Space.
A. C. Papanastasiou, G. E. Georghiou and G. V. Eleftheriades, “A Quad-Band Wilkinson Power Divider using generalized NRI-TL transmission lines”, IEEE Microwave Wireless Components Letters, 2008
M. Caris, S. Stanko, R. Sommer, A. Wahlen, A. Leuther, A. Tessmann, M. Malanowski, P. Samczyński, K. Kulpa, M. Cohen, P. Kovács, A. C. Papanastasiou, C. Topping, G. E. Georgiou, R. Guraly, ‘’SARape – Synthetic Aperture Radar for all weather penetrating UAV Application’’, Submitted for publication in IRS 2013
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £350 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!
2017 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
|6 months - Silver||1950 euros||convert|
|12 months - Gold||3200 euros||convert|
If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at email@example.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)562211007.
Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing firstname.lastname@example.org. Accounts found not to be in compliance will be deleted.