I have been involved in Quality Control for the past seventeen years and specifically in Non Destructive Testing. 

My strong communication, co-operative, organizational skills and continued attention to detail and understanding have provided me a high level of trust from my peers, supervisors and managers.

I, therefore, seek positions that will allow my skills, experience and resources to be utilized to their fullest capacity to achieve higher level of experience.

Prepared to travel if the right opportunity arises.

Summary

• Seventeen years altogether Quality Control experience in Non Destructive Tests on Radiographic method bases ( X-rays – Gamma-rays ).
• Twelve years employed in world leader investment casting Company ( lost wax process ). Specifically inspection of  industrial, biomedical, aircraft and aerospace components.
• Perform qualified testing to meet requirements to satisfy strict standards, above all Nadcap certification for Aerospace Quality Assurance.

Qualifications

Level 2 NDT inspector  RT method Patented     EN 473     Nr. 16950/PND/C

CertifyingBoard:                CICPND Italy ( Centro Italiano di Certificazione per le Prove                  

                                                                              Non Distruttive e per i processi industriali ) 

Level 2 NDT inspector  RT method Patented     EN 4179 / NAS 410      Nr. ITA-159/2

Certifying Board:                ITANDTB Italy  ( Italian Aerospace Non Destructive Testing Board )

Qualified Expert in  “ Radiation Safety and Protection, for the use of X-Ray equipment and radiation units, in materials NDT performances”.

Training classes and examinations recognized by the “Swiss Public Health Federal Office”.

Certifying Board:                SUVA work health and safety department.  Luzern, Switzerland.

WORK EXPERIENCE

RUAG TECHNOLOGY AG            Emmen, Switzerland                           Nov.2012 - present

• Non Destructive Tests on Radiographic method bases ( X-rays )
• Inspection of welded components for aircraft and aerospace structures
• Inspection of composite, honeycomb metal bonded parts
• Issue of Non Conformance Reports

OVS VILLELLA aerospace               Sesto Calende  -  Italy                                 2011 – 2012

x-ray technician/inspector ndt’s

• Non Destructive Tests on Radiographic method bases ( X-rays )
• Inspection of welded components for aircraft and aerospace structures under licence of companies such as AgustaWestland, Alenia Aermacchi, Acc La Jonchere.
• Responsible of development and establishment of new radiographic techniques.

SWISSTEST S.A.   NDT services     Balerna    -   Switzerland                               2007 – 2010

x-ray technician/inspector ndt’s

• Non Destructive Tests on Radiographic method bases ( X-rays )
• Manage all projects and inspections on behalf of main customer PRECICAST S.A.   Investment castings ( see previous employer ), and carry out  autonomously all the aspects concerning the Quality of the supplied services.
• Responsible of development and establishment of new radiographic techniques.
• Keep all documentation up to date, including Quality Manual, General and Internal Procedures in view of  ISO and Nadcap certification audits.

PRECICAST S.A.   Investment castings     Novazzano  -   Switzerland                1995 – 2007

x-ray technician/inspector ndt’s

• Achieved entirety of knowledge in the investment casting ( lost wax process ), as per inspection of components throughout the all process including repairs at all levels, with competence in reading and interpreting welding maps and parts drawings.
• Non Destructive Tests on Radiographic method bases ( X-rays – Gamma-rays ).
• Inspection of a wide range of products concerning various components for:
• jet engine and aerospace
• aeronautical
• industrial gas turbine
• biomedical surgical implants
• Important experience in some of  the “ ARIANNE “ project components production, and the production of components under licence of companies such as GE aircraft engines, GE Hungary Rt Power System, GE Oil and Gas, Power System MFG LLC, Rolls Royce, Fiat Avio Group, ABB Turbo Systems, Alstom, Ansaldo Energia, Astrium, MAN  B & W Diesel, Industria de Turbo Propulsores ( ITP ), Zimmer, Siemens, Turbomeca, Snecma Moteur.
• Close, strong co-operation with both production and quality assurance departments, as part of a wide range of tests to assure Quality of components with a  very specific and particular role.
• Chief trainer of I level employees: theoretical and practical.
• Chief trainer of  personnel for new X-ray department during the investment casting company PCB Bilbao new establishment ( as per new joint venture between Precicast SAinvestment casting and Industria de Turbo Propulsores SA ( ITP - shared by Sener Aeronáutica and Rolls-Royce ).
• Responsible of the establishment of new radiographic techniques.
• Responsible of project coordination between internal Quality Management staff and customer engineering teams.
• Report to III level supervisor about corrective actions to carry out.

CHAIN BROS S.A. Iron wire mill      Stabbio -  Switzerland                  1994 -  1995

Wiredrawing machine operator

• wiredrawing on machines 9,11,and 12 wiredrawer plates
• forklift operator.

INTHERADHESIVE S.A.         Novazzano  -  Switzerland                 1992 – 1994

1st year    cutting machine operator

• cutting machine operator: from big rolls of self-adhesive material into different sizes  depending on customers request

From the 2nd year on :   responsible of the warehouse      -    forklift operator

• reception and qualified acceptance of  rough materials, classification and preparation of the finished product ready to send the consignments.

MILLPRESS s.r.l.  Aluminium die casting   Venegono Inferiore ( VA ) - Italy         1990 – 1992

• die casting machines operator

MILITARY SERVICE         Palmanova ( UD ) - Italy

CAVALLERIA MECCANIZZATA                        1988 - 1989

• Tank driver ( M113 )
• Truck driver

STUDIO PARRINELLO COMMERCIALISTA          

Business consulting studio                 Varese– Italy                          1985 – 1987

• Apprenticeship

EDUCATION

• Highschool: period of two years as " Company expert in foreign language correspondence "
• Apprenticeship in Business consulting studio ( 1985-1987 )

                   STUDIO PARRINELLO COMMERCIALISTA   Varese - Italy

LANGUAGES

• Mother tongue - Italian
• English - high proficiency.

IELTS( International English Language Testing System ) certificate, British Council Milan

• German – basic

ADAPTABILITY

Travelling a lot but especially working in a foreign country for such a long time, made me very open to different cultures and different ways of approaching work, both as in its means and structure, so that I know that companies and especially costumers rules and requests aren't always the same.