Latest Space News
Wed, 14 Nov 2018 01:36:05 +0000
Griffin said nothing has yet been decided on how the Space Development Agency should be organized. SpaceNews.com
Tue, 13 Nov 2018 23:50:40 +0000
The smaller crew complement on the International Space Station created by last month’s Soyuz launch abort has not affected research activities there or plans to send new experiments on upcoming cargo missions. SpaceNews.com
Tue, 13 Nov 2018 18:27:05 +0000
The European Space Agency expects to carry out the qualification flight of the Space Rider spaceplane in 2021 followed by multiple demonstration missions before handing over the program to industry, according to Lucia Linares, head of ESA space transportation strategy and policy. SpaceNews.com
Tue, 13 Nov 2018 15:59:42 +0000
China unveiled a heavy-lift launch vehicle it is developing to carry a next-generation crewed spacecraft and power human spaceflight missions beyond low Earth orbit. SpaceNews.com
Tue, 13 Nov 2018 15:49:02 +0000
The European Space Agency plans to launch an Earth observation satellite equipped with an artificially intelligent processor that would enable the spacecraft to make decisions regarding what to image and which data to send to the ground. SpaceNews.com
Tue, 13 Nov 2018 15:00:23 +0000
Rupert Pearce, Inmarsat’s CEO, said Nov. 8 that the company is taking steps to retain customers in its largest market segment, having identified broadband for social use among crews as the missing component of Inmarsat’s maritime service offering. SpaceNews.com
Tue, 13 Nov 2018 12:20:10 +0000
A week after the sudden firing of Roberto Battiston as the head of the Italian Space Agency, the reasons for his ouster remain unclear while a grassroots effort is underway to restore his job. SpaceNews.com
Tue, 13 Nov 2018 08:34:23 +0000
The FCC will vote this week to considerproposed changes to orbital debris guidelines that could alter deployment plans for some satellite constellations and shorten the orbital lifetime for experimental satellites. SpaceNews.com
Mon, 12 Nov 2018 11:33:48 +0000
NASA is planning to replace its two-decade-old virtual institute devoted to astrobiology with a looser network of research teams, a move the agency said reflects the maturity of the field but which has some scientists concerned. SpaceNews.com
Sun, 11 Nov 2018 04:53:41 +0000
Rocket Lab successfully launched its Electron rocket Nov. 10 on a long-delayed first commercial mission for the small launch vehicle. SpaceNews.com
Sat, 10 Nov 2018 04:21:24 +0000
NASA signed an agreement in September with a foundation to support initial studies of a privately funded mission to a potentially habitable moon of Saturn. SpaceNews.com
Sat, 10 Nov 2018 01:02:53 +0000
The Trump administration’s desire to establish a Space Force could be in jeopardy next year after Democrats assume control of the House, while the departure of a key House appropriator could spell trouble for NASA missions to the potentially habitable moon of Europa. SpaceNews.com
Fri, 09 Nov 2018 11:49:52 +0000
NASA has certified SpaceX’s Falcon 9 to launch the agency’s most important science missions, giving the agency new options that could result in lower costs. SpaceNews.com
Thu, 08 Nov 2018 19:00:37 +0000
Building and launching spacecraft sometimes gets so much attention that the ground segment — user terminals, command and control systems and network operations —isn’t always ready even after a satellite is in space. SpaceNews.com
Thu, 08 Nov 2018 16:23:49 +0000
Ryals suggested a Space Development Agency could be helpful in providing a single voice for military space requirements. SpaceNews.com
Thu, 08 Nov 2018 14:03:49 +0000
The Canadian military, already a partner on two U.S. military satellite communications systems, is in discussions to use a third constellation that was until recently a U.S.-only system. SpaceNews.com
Thu, 08 Nov 2018 14:02:55 +0000
Grason: “We’re seeing a different type of support to get after the transformation, to elevate commercial satcom to where it needs to be, as vital infrastructure." SpaceNews.com
Thu, 08 Nov 2018 01:09:00 +0000
SpaceX Chief Executive Elon Musk said Nov. 7 that his company will attempt an orbital flight of a reusable version of a Falcon 9 upper stage by the middle of next year to test technologies for the company’s next-generation launch vehicle. SpaceNews.com
Wed, 07 Nov 2018 21:45:28 +0000
After completing the purchase of Sea Launch in April, S7 Group now views expendable rockets as uncompetitive. SpaceNews.com
Wed, 07 Nov 2018 17:09:05 +0000
DARPA has identified eight sites in the United States that it plans to use for a commercial launch competition, a selection that addresses one of the major concerns of potential competitors. SpaceNews.com
More space news...
18920 cvs - 864 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Senior Mechanical Design Engineer

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:11-11-2013
     Last Modified:01-06-2018 (07:52)
    Job information
     Current job:Senior Mechanical Design Engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:within 2 months
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, Launch Systems, Consulting/Engineering Services, Space Tourism
     KeywordsResearch, design, troubleshooting, leading, conceptualization, ideas, learning, progress, systems engineer, Catia v5, Solidworks, optimization, mechanical design, thermal analysis, structural mechanics, structural dynamics, load analysis, ISS payloads, pl
    CV

    Born: 02. March, 1980

    Nationality: Croatian

     

    Summary

    Dipl.-Ing. in Aerospace Engineering.

    Co-founded private company, designed, tested, and manufactured technical diver’s equipment.

    Worked as design and system engineer in aerospace startup company.

    Experience in team leading, project managing, writing and reviewing of technical requirements, documentation and managing of flight test operations.

    Advanced composite aero-structures design engineer at large tier one commercial aviation supplier.

    Currently Mechanical Design/Thermal Engineer, working on ISS payloads, space flight avionics and space exploration robotics projects.

    Education

    Dipl. Ing. in Aerospace Engineering – Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb (1998-2013)

    Thesis: “Detonation Reactive Propulsion System for High Performance Aircraft” (2012-2013)

    Work Experience

    Senior Mechanical Design/Thermal Engineer – Systems Engineer - Space Applications Services NV/SA (June 2016-)

    Lead Mechanical Design/Thermal Engineer:

    ICE Cubes Facility – ISS Payload

    SNC Dream Chaser UEG – Avionics Unit

    H2020 PERASPERA Space Robotics SIROM project – Active Payload Module (APM) – Planetary Track

    Supporting various space robotics and ISS payloads in-house projects

    Some of the assignments include:

    Mechanical design

    Structural mechanics and dynamics (load and stress analyses)

    Flight hardware AIT (lab and cleanroom)

    Thermal management design and analysis

    Writing project documentation:

    Verification plans and test procedures (structural and thermal)

    Design reports and analyses

    Design reviews (DDF, DJF…)

    NCRs

    Proposals and bidding papers

    Senior System Engineer – Hipersfera d.o.o. (October 2015-June 2016)

    Operations Concepts, Top Requirements, Technical Requirements documentation

    Conceptual design – new UAS project

    Structure

    Buoyancy Control

    Advanced Composite Structures Design Engineer – Team Lead – Sentient Blue GmbH (May 2015-June 2016)

    Racing C-Class catamaran team – voluntary work

    Design work on completely new boat for 2017 race

    Aerostructures Design Engineer – FACC AG (March 2014 – October 2015)

    Commercial aircraft advanced composite structures design

    Product creation through conceptualization, design, optimization, certification and operations processes

    Materials, manufacturing and maintenance processes definitions

    Close cooperation with stress, tools design and procurement departments

    Communications with customer, including creating ICD’s, technical documentation and presentations for design reviews and solution proposals

    Work with CATIA V5, especially Composite Parts Design and Composite Grid Design (Certified), and FTA for GD&T (Model Based Definition)

    Data management through SAP

    Commercial programs: Embraer E2 190/175; Zivko Extra 450 (Red Bull Air Race), Airbus A350XWB – 1000

    Conceptual design – Morphing Winglet in-house project

    Technical consultant – Mechanical Engineering – Zen Systems e.f. – Inflatable structures (December 2013 – March 2014)

    Micro startup developing inflatable structure habitats for emergency, humanitarian and special purposes.

    Conceptualization, preliminary system analyses and design.

    Research and development, accent on innovative approaches.

    General FEM structural analysis, CAD visualization, ICD’s and blueprints creation.

    Materials and production definitions, technical documentation creation.

    System Engineer – Hipersfera d.o.o. – HAAP UAV Project (July 2009 – October 2010)

    Chief engineer, leading teams working on propulsion, structure and dynamic buoyancy control, respectively.

    In charge of subsystem design verification and synthesis within top level UAS (flyer plus ground station).

    Test flight operations leader, in charge of defining Standing Operating Procedures (SOP) and roles.

    Parts and assemblies test and verification campaigns leader or supervisor. In charge of test results documentation, data analysis, interpretation and consequent actions implementation.

    Work on monthly investors monitoring committee technical reports, close cooperation with Croatian Civil Aviation Agency (CCAA) on airworthiness regulative and standards implementation.

    Design Engineer – Hipersfera d.o.o. – HAAP UAV Project (September 2008 – July 2009)

    Defined and started aircraft conceptualization process: purpose definition, payload mass and energy budget, flight envelope etc.

    Designed Airship’s rigid structure, including mechanical stresses calculation using FEM tools. Worked on thermal influence predictions of the environment and equipment using multi-physics software and tests.

    Worked on aerodynamics characteristics and hull shape optimization using CFD software and tests.

    Supervisor of the aircraft’s structure production process, logistics and tasks organization related to the available resources.

    Worked on the conceptualization, development, design and writing of technical documentation for:

    Aircraft propulsion system.

    Aircraft buoyancy system, including manipulation and storage of the lift gas (He).

    Environmental hypobaric test chamber, plus sensing and control devices (altitude simulation: pressure 0,046bar, temperature -70°C).

    Worked on the definition and implementation of the standardized tests for materials and components (ASTM, ICAO, FAA and CS).

    R&D Head (startup company co-founder and co-owner, for technical diving equipment design and production) – Franceski Petri d.o.o. (November 2002 – May 2007)

    Development, design and production of custom systems for in-line mixing of gasses for technical diving.

    Production and distribution of metering and monitoring devices for continuous control of oxygen and other gasses ratio during mixing and before the dive.

    Development of underwater lighting systems for diving and underwater photography.

    Reverse engineering of existing systems, modifications depending on customer’s orders, and price reduction and system optimization driven by higher reliability requirements.

    Skills

    Technical Skills

    Mechanical design, metallic and composite parts and assemblies

    Structural mechanics – analytical and FEM analyses

    Load analysis – structural dynamic environments, analysis and testing/verification

    Thermal design and analysis, analytical and CFD simulations

    Composite material parts production process and technology (cleanroom and assembly courses completed)

    Technical gasses storage, transport and manipulating

    Experience with most of tools and procedures in standard industrial production hall

    IT Skills

    ProEngineer, Catia v5 (CPD certified, FTA…), Solidworks, MATLAB, Fortran, C, CFD, ANSYS, NASTRAN FEM, ADAMS Multibody Dynamics, MS Office, TRACWiki, SAP, JIRA, Redmine, DOORS, ESACRACK/NASGRO, MS Windows, Linux…

    Organizational Skills:

    Leadership experience (setting team goals, task delegation, team member’s development monitoring…) gained through academic projects, military service, and as team leader in Hipersfera d.o.o.

    Experience in managing projects and production (procurement, finance, resource distribution, short and long term goals related processes tracking)

    Work planning and organizing (defining priorities and short term goals, process duration time and complexity estimation)

    Ability to form a wider perspective (work, context, opportunity, threat), and to focus on details – developed through development work on complex aerospace systems

    Social Skills:

    Work experience in both small startup and large corporation environments.

    Good communication and presentation skills (formulation of clear and specific message, argument adaptation to the specific audience, listening skills)

    Awareness of the importance of both individual work and team collaboration.

    Additional Information

    Honors and Awards:

    University of Zagreb Rector’s Award (2006/07) for Aircraft Design Project: Hiromi – advanced ESTOL utility and special purposes amphibian aircraft concept

    Military Service:

    Croatian Air Force (2007) – Basic Infantry Course, Air Search Radar Operator Course

    Driving License:

    Class B

    Languages

    English – Full professional proficiency

    Croatian – Native speaker

    German – Completed A1 basic level course

    French - Basic

    Free time activities

    Sports: Weight lifting, kettlebells, running, Apnea diving, certified SCUBA diver, bicycling

    Reading and guitar


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you accordingly. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics