Latest Space News
Fri, 18 May 2018 20:18:02 +0000
As NASA formally requests proposals for studies on the commercialization of low Earth orbit, another study presented at a congressional hearing May 17 concludes commercial space stations are unlikely to be financially viable in the mid-2020s. SpaceNews.com
Fri, 18 May 2018 14:48:14 +0000
Members of a NASA safety panel said May 17 they believed that a SpaceX approach for fueling its Falcon 9 rockets known as “load-and-go” could be used for future commercial crew missions. SpaceNews.com
Fri, 18 May 2018 03:02:18 +0000
As House appropriators approved a spending bill May 17 that partially restores funding for a NASA astrophysics mission slated for cancellation, the agency’s administrator said he was “90 percent” confident that the mission will continue. SpaceNews.com
Thu, 17 May 2018 23:25:08 +0000
Planet hopes to grab market share by offering “guaranteed collection” twice a day. SpaceNews.com
Thu, 17 May 2018 22:42:51 +0000
NASA is dealing with a contamination problem with tubing in part of the core stage of the first Space Launch System vehicle, an issue that could contribute to further delays for its launch. SpaceNews.com
Thu, 17 May 2018 20:27:37 +0000
Nine satellite companies agreed May 17 to donate satellite capacity and equipment to the United Nations, seeking to coordinate their responses to natural disasters. SpaceNews.com
Thu, 17 May 2018 19:45:38 +0000
Nearly 600 members of a union that has been on strike against United Launch Alliance for almost two weeks will vote on a new contract May 19 that would end the labor dispute. SpaceNews.com
Thu, 17 May 2018 17:10:18 +0000
SpaceX and OneWeb, two companies building thousands of satellites for broadband services, both expect to connect billions of the world's least-served to the internet. The two most prominent developers of electronically steered antennas don’t share that aspiration, however. SpaceNews.com
Thu, 17 May 2018 15:43:28 +0000
The new Pentagon-based vice commander of Air Force Space Command, Lt. Gen. David “DT” Thompson, made his first public appearance May 15, 2018, at a Washington Space Business Roundtable luncheon. SpaceNews.com
Thu, 17 May 2018 09:34:13 +0000
Testimony by NASA’s Inspector General at a May 16 hearing provided new support to efforts by two senators to block plans to end funding of the International Space Station in 2025. SpaceNews.com
Wed, 16 May 2018 22:33:57 +0000
A spending bill to be marked up by the House Appropriations Committee would provide some funding for a NASA space telescope proposed for cancellation, but not necessarily enough to keep the mission on schedule. SpaceNews.com
Wed, 16 May 2018 22:13:26 +0000
A British billionaire has invested in a company operating a ground station that has aspirations to support commercial missions beyond Earth orbit. SpaceNews.com
Wed, 16 May 2018 21:52:44 +0000
Todd Harrison, CSIS senior fellow: “With hosted payloads, there are a lot of great opportunities to increase resiliency and capacity.” SpaceNews.com
Wed, 16 May 2018 18:38:50 +0000
Aireon raised $69 million from a British partner, enabling the aircraft-tracking startup to begin making hosting payments to Iridium Communications. SpaceNews.com
Wed, 16 May 2018 02:14:44 +0000
Inflight connectivity provider Global Eagle will help Telesat in design and test the operator’s low Earth orbit satellite constellation, the companies announced May 15. SpaceNews.com
Tue, 15 May 2018 20:26:23 +0000
A NASA advisory committee, concerned about delays in the development of commercial crew systems, wants the agency to look at options where the International Space Station is operated with a reduced crew. SpaceNews.com
Tue, 15 May 2018 19:52:12 +0000
Thompson: “We needed somebody to work space every single day. Before, I didn’t recognize how much that was needed." SpaceNews.com
Tue, 15 May 2018 19:37:15 +0000
Eutelsat on May 14 said it is taking steps to secure a foothold in the European broadband market after last month’s decision to forgo jointly funding a satellite with Viasat turned the two companies into direct competitors. SpaceNews.com
Tue, 15 May 2018 18:11:00 +0000
It is still early days for this emerging sector, but 2018 will be the year that Chinese commercial launch companies begin to take off. SpaceNews.com
Tue, 15 May 2018 17:11:02 +0000
The modern ship is always in touch. It navigates by GPS, just as you do. Satellites carry email, voice calls, weather forecasts and navigation charts. SpaceNews.com
More space news...
18598 cvs - 706 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Vibration Test Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:27-02-2014
     Last Modified:27-02-2014 (12:40)
    Job information
     Current job:Vibration Test Engineer
     Employment Term:Temp/Contract
     Job location:Anywhere
     Date available:immediately
     Industry:Consulting/Engineering Services
     KeywordsVibration Test, Thermo-vacuum Test, Mechanical Design, FEM Analisys, Leadership, Good Organization skill.
    CV

    WORK EXPERIENCE

     

     

    15/11/2009–Present

    Vibration Test Engineer

    SERMS Lab. Srl, Terni (Italy)

    ▪     Feasibility analysis of the vibration tests;

    ▪     Designing ad setting up the test fixtures;

    ▪     Performing the tests;

    ▪     Technical advice during the test;

    ▪     Writing test reports.

    Business or sector Mechanical design, vibration/thermal/thermo-vacuum tests

     

    25/03/2010–20/04/2010

    Thermal Controller

    INFN Perugia, Perugia (Italy)

    ▪     Monitoring the thermocouples response on the Alpha Magnetic Spectrometer (AMS-02) detector during the Thermo-vacuum tests at ESTEC-ESA, Noordwijk (Netherlands)

    Business or sector Experimental research in the fields of subnuclear, nuclear and astroparticle physics

     

    24/04/2008–09/08/2008

    Mechanical engineer

    CMD S.p.A, Atella (Italy)

    ▪     ​Tool analysis and management on Numerical Control Machines for manufacturing process optimization.

    ▪     “Time and motion” analysis of manufacturing process.

    Business or sector High precision machining of spare parts for automotive sector

     

    EDUCATION AND TRAINING

     

     

    15/11/2009–12/12/2012

    Ph.D. degree in Physical Science Technologies for Aerospace Applications

     

    University of Perugia, Perugia (Italy)

    ▪     ​Mechanical Design by using CATIA V5R19;

    ▪     Thermo-vacuum Chamber Traning Course;

    ▪     Modal Analysis and FEM Correlation Course;

    ▪     Training Course about the correct use of Techincal Gases;

    ▪     Learning and Use of the SPECTRAL DYNAMICS (JUAGUAR) and LMS (SCADAS) control systems for Vibration Tests;

    ▪     Training Course of FEMAnalysis by using Ansys Workbench v12.1 tools;

    ▪     Theoretical Study of Pyroshock Events on Aerospace Components and Preliminary Proposal Project of a Pyroshock Simulator;

     

    06/06/2009–23/07/2009

    Internship

     

    Angelatoni Industrie S.p.A., Massa Martana (PG) (Italy)

    ▪     ​Learning and use of Solid Edge v20 software for Mechanical Design;

    ▪     Mechanical Design of a support structure for a Photovoltaic Concentrator System.

     

    14/01/2009–20/03/2009

    Technical Adviser of Energy Efficiency and Renewable Energies

     

    Consorzio UN.I.VER and Polytechnic University of Turin, Vercelli (Italy)

    ▪     ​Study of the Renewable Energy common sources;

    ▪     Performingthe Energy Diagnosis of a building;

    ▪     Consulting for improving the energy efficiency of a building.

     

    04/11/2009–07/12/2009

    Autocad 3D Course

     

    Punto Net, Atripalda (Italy)

    ▪     Training course for drawing in 3D with Autocad tools

     

    06/2008–10/2008

    Professional practice examination for Engineering Licence

     

    Università degli Studi di Basilicata, Potenza (Italy)

     

     

    28/11/2007–28/02/2008

    Internship for Master’s degree graduation Thesis

     

    C.M.D. S.p.A, Atella (Italy)

    ▪     Analysis and management of the manufacturing tools to improve manufacturing processes

     

    01/2004–04/2008

    Master Degree in Mechanical Engineering

     

    College of engineering of Università degli Studi di Basilicata, Potenza (Italy)

    ▪     ​Energy systems from renewable sources;

    ▪     Applied energy;

    ▪     Heat Transfer;

    ▪     Mechanical design of machines;

    ▪     Computational fluid dynamics;

    ▪     Integrated manufacturing systems;

    ▪     Thermo-fluid-dynamics measures and regulations;

    ▪     Control systems design;

    ▪     Thermo-fluid-dynamics design of machines;

    ▪     Design and management of Industrial plants;

    ▪     Mechanical technology;

     

    11/1998–01/2004

    Bechelor's Degree in Mechanical Enginering

     

    College of engineering of Università degli Studi di Basilicata, Potenza (Italy)

    ▪     Phisics;

    ▪     Mathematics;

    ▪     Geometry;

    ▪     Gas dynamics;

    ▪     Mechanical technology;

    ▪     Automatic Controls;

    ▪     Building science;

    ▪     Electrotechnics;

    ▪     Hydraulics;

    ▪     Computer Science;

    ▪     Applied Mechanics to the machines;

    ▪     Material Science;

    ▪     Computer Aided Design;

    ▪     Mathematical Physics.

     

    09/1993–07/1998

    High School Diploma

     

    Liceo Scientifico Statale “A. M. Maffucci”, Calitri (Italy)

     

     

    PERSONAL SKILLS

     

     

    Mother tongue(s)

    Italian

     

     

    Other language(s)

    UNDERSTANDING

    SPEAKING

    WRITING

    Listening

    Reading

    Spoken interaction

    Spoken production

     

    English

    B1

    B2

    B1

    B1

    B2

    French

    A2

    A2

    A2

    A2

    A2

     

    Levels: A1/A2: Basic user - B1/B2: Independent user - C1/C2: Proficient user

    Common European Framework of Reference for Languages

     

    Communication skills

    ▪     Good communication skills gained interacting with costumers as Responsible of Vibration Test Department ;

    ▪     Ability to work in group learned working for many years in close contact with other people;

    ▪     Great availability and ability to interact with people to solve problems.

     

    Organisational / managerial skills

    ▪     Good oragnisation skills gained as Responsible of Vibration Test Department of SERMS Lab.

    ▪     Leadership and ability to organize. In fact I directed and coordinated groups of people with the aim of mount the scientific exhibition "Le ruote quadrate" in several Italian cities. I organized and animated sport events to raise funds for charity purposes too.

    ▪     Great team spirit gained playing sports like football and volley.

     

    Job-related skills

    ▪     Ability to design and drawing mechanical components using 3D software (CATIA, solid edge).

    ▪     Ability to perform mechanical and thermal FEM analysis using Ansys Workbench software for design support.

    ▪     Ability to perform mechanical vibration tests on automotive, aeronautical and naval parts.

    ▪     Knowledge of shaker control systems (SPECTRAL DYNAMICS, LMS SCADAS).

    ▪     Practice in thermo-vacuum tests for aerospace components.

    ▪     Good knowledge of manufacturing systems and working tools for CNC machines.

    ▪     Good knowledge of main important production and employment technologies of renewable energy sources.

     

    Computer skills

    ▪     Operating systems: XP-VISTA-7-8;

    ▪     Programs: Microsoft Office (Word, Excel, Power Point), Autocad 2D/3D, BobCad-Cam, Arena 3.0, Lindo, Lingo 6, Adobe Reader; Solid Edge V20, CATIA V5, ANSYS WORKBENCH v14, ADAMS, Jaguar (SPECTRAL DYNAMICS), Environmental TestLab (LMS);

    ▪     Machine languages: Pascal, Fortran, Matlab.



    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics