Latest Space News
Thu, 21 Nov 2019 16:01:29 +0000
The moon has formed the isolated backdrop for a new era of space exploration. As you read this, there are teams of exploration advocates around the world striving to reach its surface. This new age is one that is being led not by spacefaring superpowers seeking to fly flags and footprints but instead by numerous private companies. SpaceNews.com
Thu, 21 Nov 2019 15:50:49 +0000
Space hardware builders say they fully expect 3D printing to revolutionize manufacturing, but cautioned that the technology is sometimes promoted without a full understanding of its pros and cons.  SpaceNews.com
Thu, 21 Nov 2019 14:46:55 +0000
German propulsion startup Morpheus Space won a U.S. Air Force Small Business Innovation Research contract and a NASA Jet Propulsion Laboratory purchase order after participating in the Techstars Starburst Space Accelerator. SpaceNews.com
Thu, 21 Nov 2019 14:03:20 +0000
Over the course of three days, attendees of the Advanced Maui Optical and Space Surveillance Technologies, or AMOS, conference agreed on a number of issues regarding space situational awareness and space traffic management, even if they don’t know how to resolve all those problems. SpaceNews.com
Thu, 21 Nov 2019 13:51:08 +0000
The International Telecommunication Union on Nov. 20 said the world’s spectrum regulators had reached consensus on milestones for constellations of satellites outside of the geosynchronous arc to preserve their spectrum rights.  SpaceNews.com
Thu, 21 Nov 2019 12:07:19 +0000
The Indian government has offered new details about what happened during its first attempt to land on the moon in September. SpaceNews.com
Thu, 21 Nov 2019 10:42:35 +0000
British aerospace company QinetiQ will use a newly expanded factory to build heat transfer experiment infrastructure for the European Space Agency under a 9 million euro ($10 million) contract, the company announced Nov. 21.  SpaceNews.com
Thu, 21 Nov 2019 10:29:55 +0000
A consortium led by Italian space company D-Orbit plans to operate a synthetic aperture radar (SAR) satellite for infrastructure monitoring. SpaceNews.com
Thu, 21 Nov 2019 08:15:24 +0000
Capella Space won a U.S. Air Force contract to adapt its commercial synthetic aperture radar (SAR) for military applications. SpaceNews.com
Thu, 21 Nov 2019 01:39:46 +0000
The first prototype of SpaceX’s next-generation launch system was damaged Nov. 20 during a tanking test, a setback the company claimed would not serious affect their development plans. SpaceNews.com
Wed, 20 Nov 2019 22:53:59 +0000
Rep. Derek Kilmer said commercial geospatial data should be used to supplement imagery from classified sources. SpaceNews.com
Wed, 20 Nov 2019 20:59:57 +0000
NASA plans to issue a call for ideas for a lunar rover that could be used by future crewed missions to the moon and, like many other elements of the Artemis program, be developed in a partnership with industry. SpaceNews.com
Wed, 20 Nov 2019 18:41:36 +0000
As United Launch Alliance prepares for the maiden flight of its Vulcan Centaur rocket, the company no longer has a clear timeline for a major second-stage upgrade.  SpaceNews.com
Wed, 20 Nov 2019 16:52:45 +0000
Feng Yang, Spacety CEO and founder, talked with SpaceNews about his plans for small synthetic aperture radar satellites and the origins of the company at the Space Tech Expo Europe.   SpaceNews.com
Wed, 20 Nov 2019 16:00:47 +0000
China used signals sent from NASA’s Juno probe orbiting Jupiter to test the capabilities of ground stations vital to its deep space ambitions. SpaceNews.com
Wed, 20 Nov 2019 14:49:44 +0000
The European Space Agency is preparing to allocate a few million euros to ensure Vega doesn’t have any repeats of its July launch failure, an agency official said Nov. 20. SpaceNews.com
Wed, 20 Nov 2019 14:39:49 +0000
While the physics associated with getting into orbit have not changed, the people, methods and ways we access and enable space have evolved. Credit the fuel of federal policy changes and innovation environments as the real force multipliers. SpaceNews.com
Wed, 20 Nov 2019 14:02:27 +0000
SpaceX’s plan to slash the cost of space transportation is shaking up the small satellite propulsion market. SpaceNews.com
Wed, 20 Nov 2019 13:02:50 +0000
OHB hopes to have a small launcher capable of sending 200 kilograms to low Earth orbit conduct a first flight by the end of 2021. SpaceNews.com
Wed, 20 Nov 2019 12:12:33 +0000
Commercial spaceports say they need to become more proactive in dealing with public opposition to proposed launch sites through a combination of education and community involvement. SpaceNews.com
More space news...
19513 cvs - 667 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Sr Engineering Tech

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:30-06-2014
     Last Modified:30-06-2014 (07:33)
    Job information
     Current job:Sr Engineering Tech
     Employment Term:Permanent
     Job location:US only
     Date available:immediately
     Industry:Consulting/Engineering Services
     Keywordscnc and design for manufacturing support
    CV

    SECURITY CLEARANCE: HSPD-12                   Updated:          6-29-2014

     

    Desire: To be a team member supporting manufacturing and/or design for manufacturing.  

     

    EXPERIENCE:

    Feb 2013 - present

    Sierra Lobo Inc. (onsite JSC/NASA)

    Sr. Engineering Technologist

    Job Duties:

    Provide CNC programming support for manufacturing. Provide support with estimating, planning and development of manufacturing processes. Specify tooling and machine requirements for manufacturing. Perform verification of tool paths. Create models in Creo. Design fixtures. Create mold models for composites. Provide shop floor drawings. Verify assemblies.  Maintain post processor files for CNC machines. Windchill group manager. MCAD CAE team member. Manufacturing software management, setup, troubleshooting and training assistance. Reverse engineering support using Geomagic and Creo (Pro-Engineer). Assist IT in setting up and maintaining user profile requirements on workstations. Manage signage PC monitors and shop cameras. Provide support for the sheet metal department.

     

    Feb 2005 - Jan 2013

    Barrios Technology (onsite JSC/NASA)

    Sr. Engineering Technologist

    Job Duties:

    Provide CNC programming support for manufacturing. Provide support with estimating, planning and development of manufacturing processes. Specify tooling and machine requirements for manufacturing. Perform verification of tool paths using Vericut simulation software. Maintain post processor files for CNC machines. Manager of the JSC - DDMS OM001 Manufacturing Facilities. Member of the MCAD CAE team. Manufacturing software management, setup, troubleshooting and training assistance. Reverse engineering support using Geomagic and Pro Engineer. Assist IT in setting up and maintaining user profile requirements on workstations.

    Jan 1995 – Jan 2005

    Rothe (onsite JSC/NASA)

    Offline programming specialist

    Job Duties:

    Provide CNC programming support for manufacturing. Assist in planning and development of manufacturing processes. Specify tooling and machine requirements for manufacturing. Perform verification of tool paths using Vericut simulation software. Member of the MCAD CAE team. Manufacturing software management, setup, troubleshooting and training assistance. Assist IT in setting up and maintaining user profile requirements on workstations.

    Mar 1982 – Jan 1995

    PAMCO (Precision Aerospace Manufacturing Company)

    CNC machinist / programmer, Assistant Deputy Director

    Jan 1982 –  March 1982

    Precision Specialties

    Journeyman machinist

    Jan 1981 – Jan 1982

    Setter Tool and Machine

    Shop foreman

    1977-1981

    Byron Jackson Pumps

    Journeyman machinist

    1976 – 1977

    Pump Specialties Inc

    CNC machinist / programmer

    1974 – 1976

    Pump Arts Machine

    manual and CNC machinist

     

    EDUCATION:

     

          San Jacinto Jr. College – no degree

          J Frank Dobie high school 1973

     

     

    Past Experience:

     

    ·         Processes and management

     

    o    machining centrifugal pump parts

    o    tool repair and production of new insert tooling holders

    o    aerospace manufacturing

    o    3-5 axis cnc programming and machine simulation

    o    tooling and material procurement

    o    inspection using CMM

    o    tool room grinding

    o    shop supervisor

    o    assistant deputy director

    o    reverse engineering

    o    fixture design

    o    additive manufacturing

    o    waterjet programming

    o    Wire EDM programming

    o    mold design and programming for composites

    o    post processor creation, modification and maintenance

    o    tig welding

     

     

    ·         Computer

     

    o    PC’s (30 years)

    o    UNIX (4 years)

    o    Apple  iOS7

    o    IT management, networking, software installation and maintenance

    o    PC repair, build, upgrade and troubleshoot

     

     

    ·         Software

     

    o    PC

     

    §  Microsoft operating systems from DOS to Windows 8

    §  Microsoft Office

     

    o    UNIX

     

    §  operating system 9.0

     

    ·         Programming and Simulation (latest to oldest)

     

    §  Parametric Technology Corporation (PTC) - 19 years

    ·         Pro Engineer (ver14 – Creo 2.0)

    ·         PDM

    ·         Intralink

    ·         Windchill / PDM-Link / DDMS

    §  Vericut – 19 years

    §  GPOST -15 years

    §  OMAX - 15 years

    §  Esprit - WEDM class

    §  Unigraphics (ver10 – 14) - 4 years

    §  ICAM – 4years

    §  Virtual Gibbs – 6 months

    §  EZ-CAM - 7 years

    §  Nicam – 3 years


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2019 Spacelinks
    Web Analytics