Latest Space News
Fri, 20 Sep 2019 15:56:27 +0000
With satellite operators doing a poor job complying with guidelines to deorbit their satellites, incentives or even regulation may be inevitable to address concerns about orbital debris and satellite collisions. SpaceNews.com
Fri, 20 Sep 2019 07:59:18 +0000
The new contract includes support services for the Space Rapid Capabilities Office and the Space Development Agency. SpaceNews.com
Fri, 20 Sep 2019 04:58:15 +0000
Intelsat filed a lawsuit in the New York Supreme Court alleging OneWeb Ltd. and its largest investor SoftBank Group Corp. breached contracts, committed fraud and conspired to steal confidential and proprietary information. SpaceNews.com
Fri, 20 Sep 2019 01:45:46 +0000
A retired NOAA geostationary weather satellite is being handed over to the U.S. Air Force to fill in a gap in the service’s forecasting requirements. SpaceNews.com
Thu, 19 Sep 2019 23:45:01 +0000
As both the number of satellites and the number of potential collisions grow, government and industry officials say they need to improve the ways satellite operators coordinate maneuvers. SpaceNews.com
Thu, 19 Sep 2019 20:50:24 +0000
Countries to consider science payload contributions to respective Luna-26 and Chang’e-7 spacecraft and establish a joint data center for lunar and deep space exploration. SpaceNews.com
Thu, 19 Sep 2019 16:14:05 +0000
Members of a House committee expressed skepticism about NASA’s reliance on commercial launch vehicles to carry out human lunar landings by 2024 rather than an upgraded version of the Space Launch System. SpaceNews.com
Thu, 19 Sep 2019 03:55:14 +0000
It is possible to build improved space traffic management approaches to ensure safe operations in space, a panel of experts in the field said Sept. 18, but it will require more transparency among satellite operators. SpaceNews.com
Thu, 19 Sep 2019 01:14:29 +0000
HawkEye 360 has selected the University of Toronto Institute for Aerospace Studies Space Flight Laboratory to build its next generation of satellites to fly in formation and pinpoint the origin of radio frequency signals. SpaceNews.com
Thu, 19 Sep 2019 00:52:56 +0000
A House version of a stopgap spending bill does not include any special provisions for NASA, which threatens to delay work on lunar landers needed for the agency to achieve its goal of returning astronauts to the moon by 2024. SpaceNews.com
Thu, 19 Sep 2019 00:21:14 +0000
Lt. Gen. John Thompson: “I will categorically state that there is absolutely no bias against the commercial providers in the source selection process." SpaceNews.com
Wed, 18 Sep 2019 23:54:48 +0000
On Sept. 18, 1989, SpaceNews published the first of four monthly preview issues to test the waters for a trade publication focused exclusively on space. Thirty years later, we’re still here covering the business and politics of a greatly expanded global space community. SpaceNews.com
Wed, 18 Sep 2019 21:08:48 +0000
Thompson: A major concern is a misconception that the Space Force will set national space policy. SpaceNews.com
Wed, 18 Sep 2019 19:38:38 +0000
Xenesis, a laser communications startup, plans to conduct a space-based demonstration of its Xen-Hub Optical Communications terminal in 2021 on Bartolomeo, the Airbus Defense and Space external research platform on the International Space Station. SpaceNews.com
Wed, 18 Sep 2019 16:47:04 +0000
ESA needs to succeed with two upcoming parachute tests or will see the ExoMars 2020 landing mission slip to 2022. SpaceNews.com
Wed, 18 Sep 2019 16:40:19 +0000
Inmarsat’s acquisition by Bidco passed a review by the Committee on Foreign Investment in the United States SpaceNews.com
Wed, 18 Sep 2019 12:18:24 +0000
While traditionally we talk about solar flares, anomalies and space debris, increasingly risks in space include cyber risks that have repercussions on the ground. SpaceNews.com
Wed, 18 Sep 2019 12:14:08 +0000
A group of satellite operators and other organizations have banded together to endorse a set of best practices intended to improve space safety, including measures to minimize the risk of collisions in orbit. SpaceNews.com
Wed, 18 Sep 2019 01:26:41 +0000
Raymond: “It’s no longer good enough just to have a satellite that can survive launch and can survive initial operations. You have to have a satellite that is defendable." SpaceNews.com
Tue, 17 Sep 2019 21:03:02 +0000
Boeing is asking the government to force a teaming arrangement with Northrop Grumman for the GBSD program. SpaceNews.com
More space news...
19413 cvs - 626 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Mechanical Engineer

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:31-01-2015
     Last Modified:01-02-2015 (05:10)
    Job information
     Current job:Mechanical Engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:immediately
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, , , Launch Systems, Business Services
     Keywords
    CV

    OBJECTIVE: To obtain a position as a professional engineer in the areas of research, design and/or manufacturing.

    - Detail driven engineer with over 6 years of 3D modeling experience (ProEngineer & Solid Works). B.S and M.S in mechanical engineering with strong analytical and technical problem solving skills, with the ability to multitask to prioritize for project deadlines.

     

    AREAS OF STRENGTHS & EXPERTISE:

    Ø  Solid Modeling and Prototyping (Pro E & Solidworks) 

    Ø  Product Development & Optimization

    Ø  Computational Fluid Dynamics- ANSYS & Fluent, Matlab, Autodesk Moldflow

    Ø  Graphical Programming- Lab View

    Ø  Lab Skills:  Experience with lab equipment such as X-Ray Diffractometer, Brunauer-Emmett-Teller Surface Area Analysis, Semi Electron Microscope, X-Ray Photoelectron Spectroscopy,  Oscilloscope

     

    EDUCATION:

     

    New Jersey Institute of Technology   Newark, New Jersey

    Ø Master of Science in Mechanical Engineering, August 2013

    Ø Bachelor of Science in Mechanical Engineering, May 2011

    Certification:

    Engineer in Training / FE - January 2015

     

    PROFESSIONAL EXPERIENCE:

    Sept 2011 to Dec 2012: N.A.S.A affiliated with New Jersey Institute of Technology, Newark, NJ

    Sept 2011 to Dec 2012 - Job Title: N.A.S.A GrantGraduate Researcher

     

    Job responsibility: Extending the longevity of total hip joint replacements using alternative bearing with improve wear resistance and friction resistance

    Ø  Developed a compliant bearing for minimizing contact stress and frictional shear stress under large load in oscillating angular motion similar to human hip joints.

    Ø  Due to its inertness and elastic properties, polysiloxanes were used to developed compliant bearing

    Ø  Designed and developed a control system using PC-based data acquisition.

    Ø  Developed and installed the custom application and automation systems in NI-Labview based on research requirement.

     

    May 2008 to Aug 2008: Advance Material Processing and Analysis Center, UCF, Orlando, FL

                  Undergraduate Researcher

     

    Job responsibility:  Researched and experimented using methanol as an alternative for fuel cell to maximize hydrogen production at a lower temperature by using rare earth metals as catalysts.

                   

    Ø  Synthesis and characterization of various doped ceria nanoparticles and mixed ceria with titanium were used as catalysts of methanol decomposition.

    Ø  Characterized the materials by X-Ray Diffractometer (XRD), X-Ray Photoelectron Spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) Surface Area Analysis.

    Ø  Quantified the catalytic performance and identified the mechanism of reaction as well as products of methanol decomposition. The study concluded that modified catalysts can alter the decomposition temperature of methanol.

     

    Jan 12 to May 2012: Innovative American Technology, Florida

    Marketing and Research Intern

    Ø  Internship responsibilities: Our team after much research and analysis of the detection benefits developed the target market and potential customers in the North East Region. In addition, we developed a marketing plan and deployed various means of marketing to reach potential customers that of which include the D.O.D, TSA, EPA, FEMA, and Sherriff’s offices, State and county HAZMAT Teams and DNDO. In addition, we researched for grants available to our potential customer to help subsidize the cost of the detection system as allocated by FEMA, DOD, DNDO and EPA.

    MAJOR ACHIEVEMENT:

    Ø  Led the marketing and research teams to promote the MRVS (Radioactive Nuclear Detection System) to attain a sale over $ 150,000.

     

    RELEVANT COURSEWORKS:

    Ø  Engineering Design of Plastic Product(M.S)                        Ø Stress Analysis  (M.S.)

    Ø  Advanced CAD (M.S.)/ Advanced CAE (PhD)                 Ø Sustainable Energy (PhD)

    Ø  Dynamics of Incompressible Fluids (M.S)                            ØProject Management (M.S)


    ACADEMIC PROJECTS:

    Ø  Graduate - Design & analysis of an F-16 canopy.

    Ø  Graduate - ANSYS Automobile Suspension Bracket Analysis

    Ø  Graduate - Design & analysis of Tractor Seat Suspension

    Ø  Design and Computed Aided Manufacturing of Grinder Vice

     

    awards:

    May 2010- Delta Sigma Iota Fraternity Inc.

              Dedication to Service and Philanthropy

    Ø  Single handedly raised over $ 25,000 for donations to various philanthropies including THON, Bone Marrow Registry, and other organizations.


    Oct 2008: - Material Science and Tech Conference, Pittsburg, PA

              Best Poster Competition - 3rd Place

    Ø  “Synthesis of doped and mixed cerium oxide nanoparticles as active supports for catalytic decomposition of methanol.”


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2019 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2019 Spacelinks
    Web Analytics