Latest Space News
Mon, 12 Nov 2018 11:33:48 +0000
NASA is planning to replace its two-decade-old virtual institute devoted to astrobiology with a looser network of research teams, a move the agency said reflects the maturity of the field but which has some scientists concerned. SpaceNews.com
Sun, 11 Nov 2018 04:53:41 +0000
Rocket Lab successfully launched its Electron rocket Nov. 10 on a long-delayed first commercial mission for the small launch vehicle. SpaceNews.com
Sat, 10 Nov 2018 04:21:24 +0000
NASA signed an agreement in September with a foundation to support initial studies of a privately funded mission to a potentially habitable moon of Saturn. SpaceNews.com
Sat, 10 Nov 2018 01:02:53 +0000
The Trump administration’s desire to establish a Space Force could be in jeopardy next year after Democrats assume control of the House, while the departure of a key House appropriator could spell trouble for NASA missions to the potentially habitable moon of Europa. SpaceNews.com
Fri, 09 Nov 2018 11:49:52 +0000
NASA has certified SpaceX’s Falcon 9 to launch the agency’s most important science missions, giving the agency new options that could result in lower costs. SpaceNews.com
Thu, 08 Nov 2018 19:00:37 +0000
Building and launching spacecraft sometimes gets so much attention that the ground segment — user terminals, command and control systems and network operations —isn’t always ready even after a satellite is in space. SpaceNews.com
Thu, 08 Nov 2018 16:23:49 +0000
Ryals suggested a Space Development Agency could be helpful in providing a single voice for military space requirements. SpaceNews.com
Thu, 08 Nov 2018 14:03:49 +0000
The Canadian military, already a partner on two U.S. military satellite communications systems, is in discussions to use a third constellation that was until recently a U.S.-only system. SpaceNews.com
Thu, 08 Nov 2018 14:02:55 +0000
Grason: “We’re seeing a different type of support to get after the transformation, to elevate commercial satcom to where it needs to be, as vital infrastructure." SpaceNews.com
Thu, 08 Nov 2018 01:09:00 +0000
SpaceX Chief Executive Elon Musk said Nov. 7 that his company will attempt an orbital flight of a reusable version of a Falcon 9 upper stage by the middle of next year to test technologies for the company’s next-generation launch vehicle. SpaceNews.com
Wed, 07 Nov 2018 21:45:28 +0000
After completing the purchase of Sea Launch in April, S7 Group now views expendable rockets as uncompetitive. SpaceNews.com
Wed, 07 Nov 2018 17:09:05 +0000
DARPA has identified eight sites in the United States that it plans to use for a commercial launch competition, a selection that addresses one of the major concerns of potential competitors. SpaceNews.com
Wed, 07 Nov 2018 15:49:31 +0000
Air Force satcom buyer Tom Becht: "We see a lot of independent commercial offerings. They are all good. But it would be nice if we could figure out how to do this from an enterprise perceptive.” SpaceNews.com
Wed, 07 Nov 2018 14:23:25 +0000
Commercial satellite technology is developing so fast, Britain’s Ministry of Defense isn’t certain its next-generation program will keep pace with what the future holds. SpaceNews.com
Wed, 07 Nov 2018 12:17:13 +0000
The chairman of the House appropriations committee that funds NASA lost his reelection bid Nov. 6 as Democrats won a majority in the chamber, while a leading Senate Democrat on space policy appeared to lose his race for another term. SpaceNews.com
Wed, 07 Nov 2018 02:40:27 +0000
A Soyuz rocket successfully launched a European weather satellite Nov. 6, completing a constellation of polar-orbiting satellites and providing additional reassurance about the reliability of the Soyuz. SpaceNews.com
Tue, 06 Nov 2018 23:18:36 +0000
A startup company with plans to develop orbiting propellant depots will fly an experiment to the International Space Station next month to demonstrate some of its key technologies. SpaceNews.com
Tue, 06 Nov 2018 21:16:54 +0000
Julian Knight, head of the MoD’s networks delivery team, said Skynet 6 is at a “crossroads." SpaceNews.com
Tue, 06 Nov 2018 21:16:05 +0000
Stratolaunch has performed the first test-firing of a key component of a rocket engine it is developing as the company presses ahead despite the death of its founder and principal funder. SpaceNews.com
Tue, 06 Nov 2018 20:58:41 +0000
The Italian Ministry of Defense may use two satellites to replace a single existing satellite so that it can use the Italian-led Vega C or Vega E rocket, according to a defense official. SpaceNews.com
More space news...
18918 cvs - 872 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Structural Analyst

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:13-03-2015
     Last Modified:13-03-2015 (04:37)
    Job information
     Current job:Structural Analyst
     Employment Term:Permanent
     Job location:Own country
     Date available:immediately
     Industry:Satellite Manufacturers and Subcontractors, Satellite Operators, Consulting/Engineering Services
     KeywordsAerospace Structural Engineer Analyst with versatile experience in stress analysis and project engineering of primary aerospace structures and mechanisms made of composite, metallic, and nano materials. Currently exploring opportunities
    CV
    - Aerospace Structural Engineer Analyst with versatile experience in stress analysis and project engineering of primary aerospace structures and mechanisms made of composite, metallic, and nano materials. 
     
    - Currently exploring opportunities as a direct employee, contractor, or independent consultant working for military and commercial aerospace corporations.
     
    - Unique skills include R&D optimization of new composite material applications and the ability to concurrently perform analysis by both classical closed form methods and computer finite element model (FEM) methods. 
     
    Other relevant skills include structural aspects of:
     
    - Fatigue and Dynamic Analysis
     
    - Particle Radiation Analysis
     
    - Bolted Interface Analysis
     
    - Adhesive Analysis
     
    CODES & MICRO-MECHANICS
     
    PERL UNIX LINUX
     
    FORTRAN VB CISCO 
     
    EXCEL ORACLE
     
    CASM SQ5 HOLBOAT
     
     
     
    - Aircraft
    - UAVs 
     
    METHODS 
     
    KT TQM IPT PES
     
    IDTAS Book II Fatigue
     
    MOSS-DUBERG TES-057
     
    FEMA FAR23/25 CFD LO
     
     
    ATK Space Systems, Composite Aerospace Structures,Rob Cilensik, Rich Rynders Magna UT 9/2002-2/2014
     
    Structural Design & Analyst Staff Engineer V (2011-2014) UAV
     
    Structurally analyzed by FEMs primary flight co-cured composite molded laminate skins of BMI and Cynate Ester for cure residual stresses. Performed classical analysis of bonded joints, tubes, and internal preloaded bolted joints/lugs in conjunction with FEM loads. Buckling, Static, Shock, and Modal FEM analysis.
     
    - Avoided extreme temperature and flight load failures of bonds, bolts & inserts with joint design revisions.
     
    - Improved Modal Test Survey match to < 5% with preferred FEM realism. Performance award.
     
    Project Staff Engineer Lead V (2005-2011) Project Engineer Lead Engineer for $300K/yr R&D in composite aircraft, UAV, and spacecraft prototype development. Managed Magna site projects developing new concepts and materials for composite airframes and precision composite instrument benches, dishes, and space frames.
     
    PIE developing nano-materials incorporation, new adhesives, improved injection bonding & test methods, 3D Weaves/Braids, reinforced CM/TP molded fittings; with supporting analysis. Subcontract management in IPT.
     
    - Produced a 25% weight reduction over AL for EMI/Particle Radiation shielding. Invented composite 
     
    Radiation/EMI shielding (Patent) and performed structural, particle ray trace radiation, and EMI analysis.
     
    - Created 25 ±5% weight and 20% cost reduction with new design & material for truss tube end lugs proposed 
     
    Structural Design & Analyst Staff Engineer V (2002-2005) responsible for the composite ATG Javelin aircraft and new UAV body structure preliminary analysis. Contributed to initial ATK ASTOR production prototype design. 
     
    - Contributed to Magna and Clearfield proposals winning new aircraft and UAV business. Performance award. 
     
    Boeing Commercial Aircraft, contractor by FTS Joe Floyd Seattle, WA 12/2001-9/2002
     
    Contractor for critical review of pressurized fuselage stress, fatigue life, damage tolerance, and buckling. 
     
    Performed analysis on 737NG cutout surround structure, stringers, shear ties, and skin durability. F&DT.
     

    IBM-Mylex, Boulder, CO 11/2000-12/2001
     
    Staff Software Development Test Engineer
     
    Certified and functionally tested Fiber Channel RAID DF1100R/4000R enclosures in MSCS Cluster Server Domains for SANs. Designed enclosures for Electro-magnetic interference (EMI) and thermal.
     

    Boeing Commercial Aircraft Co., thru PDS Walt Dixon, Dick Pavalsky Wichita, KS 1/1998-9/2000 
     
    Senior Structural Engineer Analyst responsible for loads/stress/fatigue of the 737-900, 767SF, & 757SF aft fuselage Skin/Stringer/Frame/Shear-tie and cargo door surround drawings. Wrote scripts for post-buckling behavior calculations, and a FEM post-processor extracting loads from a database for entire 737-900 fuselage.
     
    - Solved how to approach fuselage permanent buckling by establishing criteria and calculation method backed 
     

    Raytheon Aircraft Co., Ron French, Dave Hixon Wichita, KS 7/1996-12/1997
     
    Senior Systems Analyst Engineer responsible for structural design & analysis of the Hawker-Horizon aft wound composite fuselage, engine beam and metal engine/nacelle attachments. Generated early design concept sizing. 
     

    Boeing Commercial Aircraft Co., thru TAD John Fuller, John Pilla Wichita, KS 3/1994-7/1996
     
    Stress Engineer responsible for the 737NG-700/-600/-800 fuselage cargo door surround structure stress/fatigue analysis. Initiated sizing and Stress, Fatigue and Damage Tolerance approval of 200+ drawings. F&DT
     

    Lockheed-Martin, Advanced Programs R & D, Titan II; Jeff Bene, Cindy Amack Denver, CO 2/1980-5/1992
     
    Staff Project Engineer PIE responsible for new structural design concepts, system engineering, and structural/ mechanical/ survival aspects of composite materials, braided composites, mechanisms, optics, thin films, semiconductors and dielectrics for antennas, and instruments for spacecraft instrument payloads and missiles.
     
    Senior Stress Engineer stress, fatigue, fracture, and dynamic analysis of spacecraft structures, mechanisms, electronics, composite materials and pyrotechnic deployables, drive system servos, electronic components, solder joints, antennas, bearings (Harris & A.B.Jones), brushless servo motors, rotating pointing mechanisms.
     
    Wrote structural dynamics fatigue signal processing waveform filtering program. 
     

    Boeing Commercial Aircraft Co., Joe Floyd Seattle, WA 7/1977-2/1980
     
    Stress Engineer in group supporting the 727 Fuselage and 737 Landing Gear for stress/buckling/fatigue/fail-safe analysis for structure sizing, life predictions, upgrades, repairs, and retrofits for fleet. Fatigue, Damage Tolerance
     

    Masters of Science - Civil Engineering (Engineering Analysis) Colorado University -- GPA 3.8
     
    Bachelor of Science - Civil Engineering (Structural), University of Utah -- Cum Laude (Engineering Top 8%)
     
    CS Networking Certificate, Colorado University Previously held Top Secret Clearance (TS/SCI/Poly)
     
    Colorado Professional Engineer License - # 22481 Previously Hazardous Waste Operations Certified
     
    36+ updating professional courses FAA DER Standardization Seminar 2005
     

    INVENTIONS, DEVELOPMENTS & PUBLICATIONS
     
    - Configured design of several types of nano-material and lightweight 3D triax weave space frame joints.
     
    - Invented Trans-rotational hinged spacecraft and Prototype design of elastomeric composite substrate materials for use in dielectric & optics thin-film technology and authored 2 papers on shaped inflatables.
     
    - Invented multi-functional radiation shielding composite laminate material for electronic missions patent 8460777 and then second patent pending on chambered radiation shielding methods for manned missions.
     
    - Co-author of “Approach for Increasing the Static Dimensional Stability of Composite Space Structures”; AIAA 

    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you accordingly. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics