Latest Space News
Sat, 17 Nov 2018 09:24:58 +0000
Northrop Grumman successfully launched a Cygnus cargo spacecraft to the International Space Station Nov. 17 after two days of weather delays. SpaceNews.com
Fri, 16 Nov 2018 21:13:06 +0000
The U.S. Federal Communications Commission pressed forward with plans to firm up its rules about space safety and orbital debris Nov. 15 while at the same time questioning whether it is the right agency to do so. SpaceNews.com
Fri, 16 Nov 2018 19:23:24 +0000
NASA’s plans to return humans to the surface of the moon within 10 years got a chilly reception from an advisory group Nov. 15, who called on the agency to accelerate that timeframe and reconsider development of the Gateway facility in lunar orbit. SpaceNews.com
Fri, 16 Nov 2018 18:22:49 +0000
The round brings NorthStar E&S’s total funding to 83 million Canadian dollars and ends a funding drought from when the company announced its plans three years ago. SpaceNews.com
Fri, 16 Nov 2018 15:17:38 +0000
Spacety is one of China’s first commercial and private satellite companies in China, established in January 2016, following new government policies introduced in 2014 and 2015 to deregulate the nation’s space sector. SpaceNews.com
Fri, 16 Nov 2018 05:22:08 +0000
AST&Science announced plans Nov. 15 to begin building extremely satellites in 2019 at its new North American manufacturing plant in Midland, Texas. SpaceNews.com
Thu, 15 Nov 2018 22:41:59 +0000
SpaceX matched its personal best with its 18th launch this year, delivering the Es’hail-2 communications satellite to geostationary transfer orbit for Qatari operator Es’hailSat. SpaceNews.com
Thu, 15 Nov 2018 22:37:38 +0000
NASA Administrator Jim Bridenstine said Nov. 15 that the reelection defeat of a key appropriator, and the potential for budget cuts next year, is a cause for concern for him as he tries to balance the agency’s priorities. SpaceNews.com
Thu, 15 Nov 2018 20:42:59 +0000
The U.S. Federal Communications Commission voted Nov. 15 to approve four proposed satellite constellations, authorizing nearly 8,000 small telecom satellites to serve U.S. entities from low Earth orbit. SpaceNews.com
Thu, 15 Nov 2018 20:22:05 +0000
NASA’s top official came to Canada to make his pitch for the country to become involved in a U.S.-lead lunar space mission but that direct appeal didn’t budge Canadian government officials, at least for now. SpaceNews.com
Thu, 15 Nov 2018 19:50:59 +0000
Shanahan on the Space Force legislation: “What I feel confident about is that the proposal that we are going to carry forward makes sense.” SpaceNews.com
Thu, 15 Nov 2018 19:33:38 +0000
Solstar Space, the New Mexico startup planning to offer WiFi to people and machines in orbit, is looking for a strategic investor. SpaceNews.com
Thu, 15 Nov 2018 16:30:42 +0000
Rocket Lab, the small launch vehicle developer that recently performed its first commercial launch, has raised an additional $140 million to fund expansion of its launch activities and research projects. SpaceNews.com
Thu, 15 Nov 2018 15:03:25 +0000
Leaps in capabilities of commercial constellations of small Earth-observation satellites and the decreasing cost of their services were at the center of a debate about the future of publicly funded Earth-observation missions after Spire CEO Peter Platzer introduced the company’s ambition to become “the Amazon” of space. SpaceNews.com
Thu, 15 Nov 2018 14:06:23 +0000
While everybody is rightly celebrating recent successes in commercial space, some long-term trends are just beginning. It is still early days, and significant growth and new opportunities are just around the corner. SpaceNews.com
Thu, 15 Nov 2018 13:36:09 +0000
It’s no secret the megaconstellations will have a dramatic impact on space traffic. Experts now are turning their attention to ensuring they don’t also create a dangerous spike in orbital debris. SpaceNews.com
Thu, 15 Nov 2018 12:00:52 +0000
Space Tango, a Kentucky startup that develops microgravity research platforms, announced plans Nov. 15 to launch in the mid-2020s an autonomous in-orbit manufacturing facility. SpaceNews.com
Wed, 14 Nov 2018 23:36:34 +0000
With NASA committed to a human return to the moon, Mars exploration advocates say those lunar missions can be useful to achieve their long-term goals, if designed properly. SpaceNews.com
Wed, 14 Nov 2018 23:15:39 +0000
WASHINGTON — Air Force buyers of space systems are cutting red tape and removing layers of oversight to expedite programs, Vice Chief of Staff of the Air Force Gen. Stephen Wilson said on Wednesday. Wilson said the reorganization of the Air Force Space and Missile Systems Center and the establishment of a rapid procurement office […] SpaceNews.com
Wed, 14 Nov 2018 21:12:03 +0000
Senators Jerry Moran (R-Kan.) and Tom Udall (D-N.M.) wrote to FCC Chairman Ajit Pai saying the agency “must consider whether sufficient spectrum will remain available to accommodate today's C-band services,” among other issues. SpaceNews.com
More space news...
18925 cvs - 882 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Remote Sensor Research Assistant

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:26-05-2016
     Last Modified:26-05-2016 (07:17)
    Job information
     Current job:Remote Sensor Research Assistant
     Employment Term:Temp/Contract
     Job location:Anywhere
     Date available:immediately
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, Space Tourism
     Keywordssmall sat, satellite, engineer, astronautical, testing, systems, design, research, payload, structures, Matlab, solidworks, STK
    CV

    Summary

    Aerospace Engineer with experience in project oriented design for Cubesats and professional experience in the US Navy as an Electronics Technician working with telecommunications. Seeking position  within the space industry to develop space industries. Experience using Matlab for data analysis, multidisciplinary projects in club activities, and experimental analysis in campus aerodynamic laboratory facilities.

     

    Education

    Bachelors Science in Aerospace Engineering, Astronautics concentration

    Ira A.  Fulton School of Engineering at Arizona State University

    Graduated: May 2016

    GPA: 3.2

     

    Skills

    Tools: •Matlab •SolidWorks •Python •MS Excel •Electronics Test Equipment

    Knowledge: •Aerodynamics •Space Vehicle Dynamics •Communications Systems •Cubesat Design •Technical Writing •System Troubleshooting •Applied Experimental Statistics

     

    Projects

    Sun Devil Satellite Lab (SDSL): NASA 2015 Undergraduate Science Instrument Proposal (USIP) Competition Systems Engineer. [SDSL Awarded Phase I approval]

    Jun 2015- Present

    Developed the 3U Cubesat model within SolidWorks for subsystem layout to verify volume management and identify initial interfacing conflicts between structure and each subsystem component

    Development of USIP Science payload architecture for the FLIR Tau 2 640 IR camera and 100mm lens for a 3U cubesat bus, including interface management and structural interface fixture design.

     

    Space Systems Design: Capstone- Design and develop an inspection satellite as a hosted payload to inspects spacecraft in near Earth orbit.

    Aug 2015- May 2016

    Conducted special engineering investigation of close proximity operations satellite missions and satellite mission failures to inform mission and engineering requirements development

    Designing payload architecture to ensure visual and infrared data collection of a target satellite to discern status, possible faults, and collect information critical to target repair or maintenance

    Developing requirements and flow down for the mission from assignment prompt to develop an orbital inspection satellite to establish visual contact with nonresponsive or derelict satellites

    Designing optical payload based on mission requirements to capture specific resolution features in both visual and IR EM spectrums, along with visual feedback for GNC operations

     

    Engineering System & Experimental Problem Solving: Using Python to program a Scribbler Using a Fluke II acquire, chase, and follow a target.

    Aug 2015- Dec 2015

    Programmed a simulated obstacle course within Calico Myro python/robotics interfacing environment to test developed search and motion code

    Programmed a robust target tracking scheme using the “blob” command in Myro to include target acquisition, target approach, and follow

    Conducted testing and debugging of final code with aggregated code from multiple group members to adjust target reacquisition, blob detection parameters, course correction, and various translation speed adjustments

     

    Sun Devil Satellite Lab (SDSL): 2015 CanSat Competition to design and build a canisterized rotor descent science vehicle.

    Aug 2014-Jun 2015

    Developed the Descent Control System (DCS) configuration through design, prototyping, testing, evaluation and validation phases to interface with the science vehicle payload

    Constructed the Descent Control System (DCS) structure and skin to include additively manufactured ribs, carbon fiber spars and MonoKote wing cover as a deployable rotor system

    Designed the preliminary structural for initial science vehicle structure for configuration modeling, mass analysis, and material selection trade study using SolidWorks

     

    Lab Experience

    High Speed Aerodynamics- “Design Your Own” Lab: Designed and conducted an analysis of the ASU wind tunnel force gage.

    Jan 2015- May 2015

    Identified erroneous data from wind tunnel force gauge by comparing low speed wind tunnel drag polar to know drag polar for the NACA 0012 airfoil

    Developed a method of testing force gauge in order to identify known measurement conditions for possible calibration methods

    Conducted testing on force gauge and compared results to previous calibrations data, and original manufacturer's calibration data to identify an internal deformation causing inter axis coupling errors

     

    High Speed Aerodynamics- Transonic Flow Lab: Flow analysis of the transonic regime using small perturbation theory in a simulated environment using Matlab.

    Jan 2015- May 2015

    Coded a computational flow analysis for transonic flow regime over a selection of airfoils using small perturbation theory within Matlab

    Modeled NACA 0012 airfoil and a NASA Langley Whitcomb 11% thick super critical airfoil within transonic flow to observe the advantages of a supercritical airfoil to delay drag divergence

     

    Work Experience

    ASU Remote Sensor Lab Group

    Tempe, AZ

    Jan 2016- Present             

     Research Assistant- Sensor Design, Prototyping, and Building

    Background research current LIDAR wind sensor and readily available “off the shelf” LIDAR technology to design and prototype a low cost laser range finder

    Developing a prototype laser rangefinder using a Raspberry Pi for the purpose of designing a low cost LIDAR

     

    ASU Teaching Assistant

    Tempe, AZ

            Jan 2016- May 2016

     Thermofluids TA- assisted in class preparation and curriculum development

    Led weekly recitations to cover course topics using examples and discussion to explore current course concepts

    Held weekly office hours to provide one-on-one assistance on homework, test preparation, and class material

    Developed in class quizzes to deliver quick feedback to the professor on course concept understanding

     

    ASU Private Tutor

    Tempe, AZ

             Jan 2016-May 2016             

     Thermofluids Tutor- Conducted private tutoring to assist a disabled student flourish

    Developed a condensed review of key concepts, definitions, and equations to review course concepts through repetition

    Provided guided discussion for homework and practice exams to allow for effective learning without providing solutions.

     

    Metal Craft

    Tempe, AZ

            Aug 2012-Sep 2013             

      Internship- Aerospace component fabrication shop processes and facility maintenance

    Organized facility materials including; in-processing, collated storage facilities, and recycled metals.

    Maintained shop’s mills, lathes, and CNC equipment by managing coolant and lubricant levels, clearing recycle materials, and setting up and tearing down operational fixtures.

    Review of drawings for feature cataloging using InspectionXpert software.

     

    United States Navy

    Sasebo, Japan/San Diego, CA

    Jan 2003-Jan 2009

      Electronics Technician- HF and UHF radio technician  

    Responsible for 30 UHF radios for LOS and SAT communications involving troubleshooting, maintenance, insulation, repair of radios and associated equipment (including antennas, remote amps, and handsets)

    Regularly used oscilloscopes, voltmeters, signal generators, power supplies, and dummy loads in maintenance and troubleshoot of radio sets

    Handled division equipment supply orders by coordinating with ship’s supply division and combat systems to facilitate placement part purchasing

     

    Current Activities: •System Tool Kit certification •edX ANSYS Simulation software course •SDSL Pheonix Cubesat •Remote Sensor Research Group


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you accordingly. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics