Latest Space News
Fri, 17 Nov 2017 00:00:00 +0100
Landing on Mars is difficult and not always successful. Well-designed advance testing helps. An ambitious NASA Mars rover mission set to launch in 2020 will rely on a special parachute to slow the spacecraft down as it enters the Martian atmosphere at over 12,000 mph (5.4 kilometers per second). Preparations for this mission have provided, for the first time, dramatic video of the parachute opening at supersonic speed. The Mars 2020 mission will seek signs of ancient Martian life by investiga...
Thu, 16 Nov 2017 15:07:00 +0100
The U.S. Navy's Communications Satellite Program Office, PMW 146, and Lockheed Martin (NYSE: LMT) handed over full operational control of the fifth Mobile User Objective System (MUOS) satellite to the Naval Satellite Operations Center (NAVSOC). The October 11 milestone followed the successful completion of the MUOS-5 satellite's on-orbit testing and delivery of all operational products needed to "fly" the satellite. In April, the Navy, working with Army Forces Strategic Command (ARSTRAT), con...
Thu, 16 Nov 2017 14:04:00 +0100
As part of ESA's strategy to foster commercial competitiveness in Europe while focusing on its core aims, the agency has transferred ownership of several ground tracking stations for reuse by external organisations. By the end of 2017, ESA will have transferred three stations to national organisations in Spain and Portugal, who will take over the provision of satellite tracking services to a wide variety of commercial customers. The three stations involved in the transfer are all equipped ...
Wed, 15 Nov 2017 19:33:00 +0100
Boeing [NYSE:BA] won large commitments across its twin- and single-aisle commercial airplane families, debuted key capabilities including the CST-100 Starliner docking and KC-46 refueling simulators, and announced services agreements at the 2017 Dubai Airshow. "This has been a very successful show for Boeing. Our regional customers have maintained their trust in our products and technology, and our partnerships in the Middle East region continue to grow," said Bernard Dunn, President, Boeing ...
Wed, 15 Nov 2017 12:00:00 +0100
A temperate Earth-sized planet has been discovered only 11 light-years from the Solar System by a team using ESO's unique planet-hunting HARPS instrument. The new world has the designation Ross 128 b and is now the second-closest temperate planet to be detected after Proxima b. It is also the closest planet to be discovered orbiting an inactive red dwarf star, which may increase the likelihood that this planet could potentially sustain life. Ross 128 b will be a prime target for ESO's Extremely ...
Wed, 15 Nov 2017 11:29:00 +0100
Thales Alenia Space, a joint venture between Thales (67%) and Leonardo (33%), has been chosen by the Italian space agency ASI to develop an instrument called RIME (Radar sounder for Icy Moons Exploration) for the JUICE (JUpiter Icy moons Explorer) mission, part of the European Space Agency's "2015-25 Cosmic Vision" program. Scheduled for launch in 2022 with an expected arrival in 2029, the JUICE mission is designed to study the Jovian system and more specifically its icy moons, Ganymede, Call...
Wed, 15 Nov 2017 00:00:00 +0100
The Ariane 5 for Arianespace's December 12 year-ending flight for 2017 has completed its initial build-up at the Spaceport in French Guiana - where preparations also are moving ahead with four satellite passengers that will further expand Europe's Galileo global navigation system once in their final orbit. During activity in the Spaceport's Launcher Integration Building, this heavy-lift vehicle for Arianespace Flight VA240 underwent the assembly process that began by mating its two solid prop...
Tue, 14 Nov 2017 19:47:00 +0100
The Defense Advanced Research Projects Agency (DARPA) has awarded BAE Systems a contract worth up to $12.8 million to develop an innovative space evaluation and analysis testbed to support the development, integration, evaluation and analysis of advanced space enterprise command and control (C2) tools and capability technologies. The U.S. military must be able to quickly establish situational awareness and execute operations in space. Within the space domain, many thousands of objects that ar...
Tue, 14 Nov 2017 13:45:00 +0100
Orbital ATK (NYSE: OA), a global leader in aerospace and defense technologies, today announced that the "S.S. Gene Cernan" CygnusTM spacecraft successfully completed its rendezvous and berthing maneuvers with the International Space Station earlier this morning. This marks the company's eighth successful berthing with the orbiting laboratory. Cygnus launched into orbit aboard an Orbital ATK Antares(tm) rocket at NASA's Wallops Flight Facility on November 12. The spacecraft then executed a ser...
Mon, 13 Nov 2017 17:45:00 +0100
Thales Alenia Space has signed a contract with ArianeGroup, prime contractor and design authority of Ariane 6, to design, develop, qualify and manufacture the telemetry transmitter of the new European launcher. The telemetry transmitter is responsible for transmitting to the ground the data generated by the launcher throughout the whole launch mission. It is the first contract of the company in Spain in the launchers segment. After three decades of activity in the space sector participating i...
Mon, 13 Nov 2017 17:00:00 +0100
What seemed at first like a rare instance of a huge, ancient galaxy revealed itself to be an even rarer pair of extremely massive galaxies, seen on the brink of merging when the Universe was only a billion years old. This outstanding source was first identified by ESA's Herschel space observatory, and later exposed in greater detail with the ground-based Atacama Large Millimeter/submillimeter Array (ALMA) in Chile. The earliest galaxies in the 13.8 billion-year history of our cosmos starte...
Mon, 13 Nov 2017 16:00:00 +0100
Gas giant Jupiter, organic molecules in star-forming clouds and baby galaxies in the distant Universe are among the first targets for which data will be immediately available from the James Webb Space Telescope once it begins casting its powerful gaze on the Universe in 2019. Thirteen "early release" programmes were chosen from more than 100 proposals after a competitive peer-review selection process within the astronomical community. The programmes have been allocated nearly 500 hours of obs...
Mon, 13 Nov 2017 00:00:00 +0100
After a successful year-long test campaign by Airbus at IABG in Ottobrunn near Munich, the twin GRACE-FO (Gravity Recovery and Climate Experiment Follow-On) satellites will soon travel to their launch site in California. During testing, the gravity-measuring satellites, which will track the continuous movement of liquid water, ice and the solid Earth due to Earth's changing seasons, weather and climate processes, earthquakes and even human activities, were subjected to conditions similar to t...
Sun, 12 Nov 2017 16:15:00 +0100
Orbital ATK (NYSE:OA), a global leader in aerospace and defense technologies, successfully launched its Antares(tm) rocket carrying a Cygnus(tm) spacecraft today at 7:19 a.m. EST, from NASA's Wallops Flight Facility in Wallops Island, Virginia. The launch is Orbital ATK's eighth cargo delivery mission to the International Space Station for NASA. During the mission, designated OA-8, Cygnus will deliver vital equipment, supplies and experiments to the astronauts aboard the space station, as well a...
Fri, 10 Nov 2017 00:00:00 +0100
A contract for two new generation communications satellites was signed today by Turksat with Airbus Defence and Space. The satellites, Turksat 5A and Turksat 5B, are based on the latest Electric Orbit Raising (EOR) version of Airbus' highly reliable Eurostar E3000 platform, which uses electric propulsion for in-orbit raising and station-keeping. "We are very pleased to welcome Turksat as a new Eurostar customer for the most powerful satellites of their fleet. We were the first to demonstra...
Thu, 9 Nov 2017 14:04:00 +0100
NASA's Orion spacecraft aims to send humans further into space than ever before, and ESA's European Service Module will provide the essentials for keeping the astronauts alive and on course. A review of the programme by NASA to assess progress is now showing a launch date from December 2019 to June 2020. The first Exploration Mission-1 will circle the Moon without astronauts to lay the foundation and prove the technology for a second mission with a crew. In Bremen, Germany, integration ...
Thu, 9 Nov 2017 11:42:00 +0100
A UK company has been selected to undertake the Assembly, Integration and Test (AIT) for a satellite which will help tackle climate change, Science Minister Jo Johnson announced today. Thales Alenia Space has signed a contract with the UK Space Agency to work on MicroCarb, a joint UK-French satellite mission which will measure sources and sinks of carbon, the principal greenhouse gas driving global warming. It is the first European mission intended to characterise greenhouse gas fluxes on Ear...
Thu, 9 Nov 2017 00:00:00 +0100
At the Dubai Airshow, which runs from 12th to 16th November 2017, Airbus will showcase its wide range of innovative technologies, products and services, from market-leading commercial and military aircraft to helicopters and space systems. The Airshow, which was launched in 1986, represents one of the largest and most important aerospace events in the world. The Dubai Airshow is an important platform for Airbus to demonstrate its products and services to customers as the organisation looks to...
Wed, 8 Nov 2017 22:05:00 +0100
ViaSat Inc. (NASDAQ: VSAT), a global broadband services and technology company, today announced it expanded its relationship with JetBlue, and will serve as the direct in-flight internet service provider to the airline. JetBlue aircraft will be upgraded to the latest ViaSat hardware, and will have access to the additional coverage and capacity offered by ViaSat's next-generation ViaSat-2 and ViaSat-3 satellite platforms JetBlue first offered the ViaSat in-flight internet service, branded Fly-...
Wed, 8 Nov 2017 19:05:00 +0100
Berkeley Lab and UC Berkeley scientists were part of a team that helped to decipher one of the most bizarre spectacles ever seen in the night sky: A supernova that refused to stop shining, remaining bright far longer than an ordinary stellar explosion. What caused the event is puzzling. A Las Cumbres Observatory press release about the supernova, which was discovered by the Palomar Transient Factory in September 2014, noted that the explosion at first appeared to be an ordinary supernova. "Se...
More space news...
18192 cvs - 946 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Aerospace Mechanical Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:30-05-2016
     Last Modified:30-05-2016 (09:09)
    Job information
     Current job:Aerospace Mechanical Engineer
     Employment Term:Either
     Job location:Europe only
     Date available:within a month
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, , , Launch Systems, Consulting/Engineering Services
     KeywordsAerospace Mechanical Engineer: Structure, Stress, Thermal and Design.
    CV

    Date of birth: 02/07/1982

    Nationality: French

     

    AEROSPACE MECHANICAL ENGINEER

    Structure, Stress, Thermal and Design

     

    ABSTRACT

    Stress Project Leader in Aeronautical, Space and Automotive sectors.

    Aiming to keep on taking up new technical challenges in a strong teamwork environment.

     

    WORK EXPERIENCE

     

    September 2009 - Present: ATOS Spain for AIRBUS and AIRBUS DS (Madrid, Spain)

     

    Stress and Design Engineer for Satellite structure sizing

    September 2014 – present (>1.5 year)

    Program: JASON-CS/Sentinel6, NGSAR and SOLAR Orbiter for Airbus DS (Casa Espacio), Madrid

    Product: Spacecraft Primary and Secondary structures (metallic and composite), Radiators S/S

    Tasks: Design (definition of structural parts, support on thermal parts, drawing validation) and Stress (FEM, static and dynamic mechanical analyses, sizing) during PDR/CDR phase.

    Tools: Patran, Nastran, Hypermesh, Antesala, CATIA V5, MS Excel, MS Project

     

    Thermal Engineer for Space Electronic Units

    August 2015 - September 2015 (2 months)

    Program: JASON for Airbus DS (Crisa), Madrid

    Product: Electronic Unit

    Tasks: Thermal FE modelling, Heat Transfert calculation

    Tools: Hypermesh, I-deas, TMG

     

    Stress Project Leader for ISAMI Tool Development management

    June 2013 – September 2014 (>1 year)

    Program: ESA (non-specific design) for Airbus Toulouse, Madrid, Hamburg, Bristol

    Product: ISAMI calculation program development, integration and deployment

    Tasks: Project management, Team management (10 people)

    Tools: MS Project, ISAMI, Office

     

    Stress Technical Responsible for Aircraft Sizing

    October 2013 – March 2014 (6 months)

    Program: A350XWB-900 Rear Fuselage (Section 19)

    Phase: Certification phase

    Product: Metallic and composite parts

    Tasks: Supervision of full section detailed FEM generation; calculation and documents checker

    Tools: Nastran, Patran, Hypermesh, ISAMI, MS Excel

     

    Stress Technical Responsible for Aircraft Sizing

    November 2010 – October 2012 (2 years)

    Program:  A350XWB-900 Rear Fuselage (Section 19)

    Phases: Maturity C, modifications and First Flight phases

    Product: Composite parts (fuselage, beams, frames) and metallic parts (frames, fittings)

    Tasks: Technical Responsible, Stress analyses validation, Methods development, Team management (20 people), Activity planning

    Tools: MS Project, Nastran, Patran, ISAMI, MS Excel (VBA)

     

    Stress Engineer for Aircraft Sizing

    September 2009 – November 2010 (1 year)

    Program:  A350XWB-900 Rear Fuselage (Section 19)

    Phases: Maturity B

    Product: Composite parts (fuselage riveting) and metallic parts (reinforcements, fittings)

    Tasks: Responsible for detailed models. Static analyses and structure sizing.

    Tools: Nastran, Patran, Hypermesh, ISAMI, MS Excel (VBA)

     

    May 2009 – August 2009:  ASSYSTEM Iberia for NAVANTIA (Madrid, Spain)

     

    Stress Engineer for Submarine components sizing

    May 2009 – August 2009 (4 months)

    Program:  Submarine S80

    Product: tanks, acoustic panels

    Tasks: Mechanical analyses (static, dynamic) and structure sizing

    Tools: Nastran, Patran, Catia V5

     

    June 2007 – May 2009: ALTRAN for THALES ALENIA SPACE (Toulouse, France)

     

    Stress Engineer for satellites antennas Sizing.

    June 2007 – May 2009 (20 months)

    Division: Antenna Mechanical analyses department

    Programs:  YAHSAT-1B, GLOBALSTAR, ARABSAT-5B, W2A, W7, IRIDIUM, SARAL

    Phases: Analyses from pre-design to tests predictions.

    Product: Telecommunication payloads, antennas and reflectors (structure, bolts, inserts)

    Tasks: Finite Element Meshing; modal, static, thermo-elastic, sine, random and acoustic analyses.

    Tools: Nastran, Patran, I-deas, Shell, Fortran, VBA, Dynaworks.

     

    Stress Methods Engineer for Antennas Sizing Methods.

    January 2008 – April 2008 (3 months)

    Division: Antenna Mechanical analyses department

    Product: Telecommunication payloads, antennas and reflectors (structure, bolts, inserts)

    Tasks: Redaction of an antenna mechanical analyses methodology: development process, meshing and analyses methods, post-processing theories and applications, vibration tests, material database.

     

    March 2006 – June 2007: ALTRAN in EADS ASTRIUM (Toulouse, France)

     

    Stress Engineer for satellites platform Sizing.                                                            

    March 2006 – June 2007 (15 months)

    Division: Mechanical Design Office department

    Programs:  ELISA, COMS

    Phases: analyses from pre-design to CDR

    Product: Micro-satellite, telecommunication platforms (platform, payload, bolts, inserts, fittings)

    Tasks: Finite Element Meshing. Modal, static, sine, random and thermo-elastic analyses.

    Tools: Nastran, Patran, I-deas, Shell, VBA.

     

    April 2005 – September 2005: ELASIS (FIAT group), Naples (Italy)

           

    Simulation engineer (final internship) for car gearbox optimization                        

    April 2005 – September 2005 (6 months)

    Division: Transmission-NVH, R&D internal research

    Product: Gearbox, clutch

    Tasks: Development of a numerical model for noise reduction. Correlation with tests.

    Tools: Matlab Simulink

     

    March 2004 – August 2004: FAURECIA, Hagenbach (Germany)

           

    Stress engineer (internship) for instrument panel crash tests prediction       

    March 2004 – August 2004 (6 months)

    Division: Simulation Division

    Product: Head impact test device for instrument panel development

    Tasks: Modelling (mock-up, meshing) of a crash test bench, crash analysis, validation of the model with tests.

    Tools: Catia V5, Pamcrash

     

     

    EDUCATION

     

    2002 – 2005 :

    Engineering studies in SUPMECA Paris, a state selective Engineering School.

    3-year curriculum, specialization in CAE (FE Methods, structure dynamics, …) and CAD.

    I obtained the final degree, equivalent to a Master of Science in Mechanical Engineering.

     

    2000 – 2002 :

    Mathematics and Physics preparatory school, intensive and selective preparation for the national competitive examination to enter Engineering Schools (Lycée Malherbes, Caen, France).

     

    1999 – 2000 :

    “Baccalauréat”, final high school degree. Awarded with honours.

     

     

    SKILLS

     

    GENERAL SKILLS

    Aeronautical, Spatial, Automotive and Naval sectors

    Stress analyses, simulations, methods: FEM, analytical calculations, numerical modelling and multibody simulations

    Mechanical Design of satellites / aircraft components, CAD (metallic and composite)

    Thermal analyses

    Team Leadership, Project management

     

    COMPUTER SKILLS

    Technical software:

    PATRAN/IDEAS/HYPERMESH - NASTRAN: meshing, static, dynamic, non-linear analyses

    ABAQUS: Non-lineal calculations

    I-deas – TMG: meshing, thermal analyses

    CATIA V5: hybrid modelling, parametric CAD

    MEDINA, PAMCRASH:

    MATLAB-SIMULINK

    Dynaworks, ADAMS

    Systems and languages: Windows/Linux, Python, VBA, C, C++, SHELL, AWK and Fortran

    Office tools: MS Project, Word, Excel, Power point

     

    TRAINING:

    Introduction to thermal analyses on electronic units. April 2015. Atos.

    Introduction to Programming in Python. December 2014. Atos

    Introduction to Fatigue and Fracture Mechanics. September 2014. Atos

    Introduction to Structural Dynamics with NASTRAN. September 2014. Atos

    Stress Analysis with ANTESALA. September 2014. Atos

    Introduction to Programming.  January 2014. Atos

    Structural Testing Training. September 2013. Atos.

    Introduction to Design of Metallic Parts Manufacturing Technologies: Machining and Forming. September 2012. Atos

    Team Management (40h). February 2012, Atos

    Configuration Management. November 2011. Atos

    Project Management (40h). November 2011. Atos

    Advanced Hypermesh, November 2010. DPS SL

    ISAMI Stress Static. November 2010. Airbus (ELS-EADS Learning Services)

    CATIA V5 course (20h). July 2009. ASSYSTEM Iberia.

     

     

    LANGUAGES

    French:        mother tongue

    Spanish:      bilingual, 6 years in Spain

    English:       fluent, written and oral, studied 12 years, work language for one year, TOEIC 970

    Italian:         intermediate, 6 months in Italy

    German:      intermediate, 8 years of studies, 6 months in Germany, Zertifikat Deutsch (gut)

     

     

    INTERESTS

    Travel: keen on discovering nature and new cultures (trips in Latin America, Asia, Africa, …)

    Sport: trekking, squash, running.

    Mechanical interests: space, cars


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £350 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2017 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)562211007.
    Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2017 Spacelinks
    Web Analytics