Latest Space News
Sun, 23 Sep 2018 15:10:09 +0000
With Congress set to approve a Federal Aviation Administration bill with some commercial space provisions, those in the industry are hoping for action on other bills before the end of this year. SpaceNews.com
Fri, 21 Sep 2018 10:37:57 +0000
NASA is planning two alternative reviews of an airborne observatory amid conflicting congressional views on whether the program will be eligible for the next senior review of astrophysics missions. SpaceNews.com
Thu, 20 Sep 2018 23:58:10 +0000
One thing a highball estimate does accomplish is “shift the debate to how expensive this is going to be." SpaceNews.com
Thu, 20 Sep 2018 22:06:46 +0000
NOAA awarded more than $8 million in contracts this week to three companies in the second round of a commercial satellite weather data pilot program. SpaceNews.com
Thu, 20 Sep 2018 21:00:48 +0000
European launch provider Arianespace signed a contract with the Korean Aerospace Research Institute for a Vega C mission Sept. 20, growing the rocket’s backlog to five as its debut launch nears. SpaceNews.com
Thu, 20 Sep 2018 18:19:43 +0000
Whoever signs up for one of two certification flights for the Omega rocket, will get a ride “at a reduced rate." SpaceNews.com
Thu, 20 Sep 2018 01:45:58 +0000
"It doesn't necessarily mean buying a company. It could be buying a product line. It could be buying a portion of a business that fits with us. We want to make sure that it's strategic." SpaceNews.com
Wed, 19 Sep 2018 23:51:28 +0000
Bezos: At a time of increasing global competition, “You have to be able to go to space more frequently, with less lead time." SpaceNews.com
Wed, 19 Sep 2018 23:32:28 +0000
Kleos Space, a company developing a constellation of satellites for radiofrequency geolocation work, will launch its first satellites in 2019 with Rocket Lab under a deal announced Sept. 19. SpaceNews.com
Wed, 19 Sep 2018 20:27:57 +0000
A Georgia county seeking to develop a spaceport has attracted a small launch vehicle company to set up operations and, hopefully, launch from there. SpaceNews.com
Wed, 19 Sep 2018 19:28:56 +0000
Shanahan on space reorganization: “We’re going to find the best way. There will be some hammering and arm wrestling. " SpaceNews.com
Wed, 19 Sep 2018 15:12:29 +0000
Gen. Jay Raymond: “There’s an explosion of things happening in the commercial industry. We want to capitalize on that." SpaceNews.com
Wed, 19 Sep 2018 08:17:39 +0000
Boeing and SpaceX, who have been struggling to meet safety thresholds established by NASA for commercial crew vehicles, now believe their vehicles can meet those requirements as they prepare for test flights scheduled in the next several months. SpaceNews.com
Wed, 19 Sep 2018 03:39:09 +0000
Orbital Insight, a Silicon Valley geospatial analytics company, announced the purchase Sept. 18 of FeatureX, a Boston-based artificial intelligence firm specializing in computer vision for satellite imagery. The terms of the purchase were not disclosed. SpaceNews.com
Wed, 19 Sep 2018 01:11:48 +0000
Wilson suggested her proposal is only the opening salvo. “I expect there will be a lot of discussion about how to implement the president’s vision.” SpaceNews.com
Tue, 18 Sep 2018 18:14:02 +0000
Melanie Stricklan, Slingshot Aerospace: “We see a big need for SSA solutions, not just in the military but also in academia and in satellite owners and operators." SpaceNews.com
Tue, 18 Sep 2018 18:01:02 +0000
Air Force Secretary Heather Wilson’s Space Force proposal dropped on the first day of the Air Force Association’s Air Space Cyber symposium, and it took the community by storm. SpaceNews.com
Tue, 18 Sep 2018 18:00:33 +0000
The Air Force’s advocacy group, the Air Force Association, is taking off the gloves and pointedly voicing opposition to separating space out of the Air Force. SpaceNews.com
Tue, 18 Sep 2018 17:12:29 +0000
Three months after its inaugural meeting, the advisory group supporting the National Space Council is working to organize itself and identify topics for study while preparing for its next full meeting. SpaceNews.com
Tue, 18 Sep 2018 07:40:17 +0000
AFA: "Standing up a separate space bureaucracy amplifies the problem by driving more money to a headquarters function, not space operations. " SpaceNews.com
More space news...
18814 cvs - 817 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Sr. Spacecraft Integration Technician

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:13-10-2016
     Last Modified:09-11-2016 (03:33)
    Job information
     Current job:Sr. Spacecraft Integration Technician
     Employment Term:Permanent
     Job location:Own country
     Date available:immediately
     Industry:Launch Systems
     KeywordsManufacture and assemble aircraft and space aluminum and composite structures. Generate detailed engineering documents. Solve non-conformance issues. Create work orders. Review engineering documentation
    CV

    Summary:
    Manufacture and assemble aircraft and space aluminum and composite structures. Generate detailed engineering documents. Solve non-conformance issues. Create work orders. Review engineering documentation.

    Objective: Aircraft Assembly Technician / Spacecraft Integration Specialist.

    Overview: High Energy performer, leadership and excellent communication skills.

    Strengths: Team player, detailed and resource oriented, time management, highly creative. Current Secret & Top Secret Security Clearances: DOD, TS/SCI, SF-86

    Work Experience:
    THE BOEING COMPANY – El Segundo, Ca – 12/10 to Present Position: Sr. Spacecraft Integration Technician Perform electrical and mechanical assembly of flight spacecraft components including but not limited to soldering, wire stripping, wire routing, crimping, wire harness assembly, bonding, cleaning, surface preparation, assembly/disassembly, fastener installation, repair and rework of flight hardware, assembly/disassembly of ground support equipment and tooling, drilling, cutting, hand and power tool operation, testing, drawing review, interpretation of build packages and planning documentation, crane and hoist operation, moving platform, fork lift, rolling stock, and access equipment operation, hardware moves, etc. The ability to work in a high-paced demanding environment. Read drawings and engineering specifications. Follow directions, reading and interpreting metrics, charts, and data. -Positive attitude and high work ethics, punctuality, time management skills. Personal warranty and high standard of workmanship with attention to detail. Seeking assistance when necessary, good verbal and written communication, Adequate math skills. Use hand / power tools and manufacturing equipment. - Computer literacy.

    SPACE EXPLORATION TECHNOLOGIES - Hawthorne, Ca – 05/10 to 11/2010 Position: Rocket Structures Integration Technician Responsibilities: Use tooling holes, pilot holes, or by hand (as required), per drawing or tooling instructions. Align parts and secure in place using Clecos or tooling/hand clamps. Check for good edge margins and alignment. Shim and/or trim parts as required. Select drill bits, reamers and/or countersinking tools for pilot and full size holes. Locate, drill pilot holes using drill motor and proper size drill bit(s). Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor. Set countersinking tools to proper depth as required. Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners. Use solvents to clean surfaces prior to sealing or assembly. Apply sealant, alodine, primer, adhesives, special finishes. Load and unload ovens to bond detail parts to assemblies. Handle and dispose of hazardous materials in approved manner. Determine and obtain correct type and size fasteners. Cold work holes to prepare for close tolerance fastener installation. Install bushings into housings using arbor press and/or hydraulic puller. Apply liquid nitrogen to facilitate installation of bushings. Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner). Check work after completion of each operation in job per drawing. Work with planners to improve efficiency of work flow throughout the department. Ensure the quality of manufactured items is in conformance with applicable drawings and specifications. Continually monitor processes and make continuous improvement recommendations.

    AEROVIRONMENT- Simi Valley, Ca – 03/09 – 05/10 Position: Assembly Integration Specialist Manufacture and assemble of composites structures and hydrogen fuel systems for “Global Observer” –Unmanned Aircraft Vehicle (UAV). Performed sheet metal fabrications of parts and sub- assemblies, build aircraft center and outer composite wings, wing spars and ribs, skin panels, center fuselage, empennage and tail section, install wire harness, mix solvents and various bonding adhesives; applied to bond composite surfaces. Read blueprints/drawings, follow written instructions, and install flight control surfaces, flaps, slats, rudder, and actuators. Install various fasteners onto door and engine hatch bay compartments, route and install coax cables for communications and camera equipment on aircraft. Inspect workmanship and completed assembly work orders. Initiate and complete pre-flight testing at Edwards Air Force Base.

    NASA-JPL JET PROPULSION LABORATORY - Pasadena, CA – 03/07– 01/09 Positions: Spacecraft Flight Integration Specialist – Airframe & Power Plant Licensed. Work in the development of Proto-type and flight hardware; assemble and support testing of mechanical devices. Work with Engineers on the Mars Science Laboratory –MSL, performing and assembling space craft hardware, follows work instructions in sequence, maintains quality assurance acceptance reports and complete assignments as required. NASA Certified in protocol and procedures with hazard waste handling and disposal. Operate actuators and install wire harness onto spacecraft; drill precision holes within tolerances of .001” Critical handling of flight hardware and overhead crane moves on Spacecraft and Delta IV rocket, Electrical Static and Discharge prevention. Maintenance and operates heat rejection and hydraulic systems. Certified in working environment of 100-10,000 clean rooms. Repair flight control surfaces that require drilling, reaming, and countersinking of aluminum, titanium, and composite structures. Installation of hi locks, Jo-bolts, and hi-torque fasteners. Interpret drawings and engineering orders. Read blue prints/drawings, follow written instructions. Use assorted hand tools such as drills, jo-bolt and Hilok installation tools. Drill, ream, and countersink close tolerance holes within specifications. Multitask concurrently as required in order to complete assignments. Member of Assembly, Test, and Launch Operations – ATLO.

    HITCO CARBON COMPOSITES -Gardena, CA – 05/ 05 – 11/06 Position: Quality Engineer: Responsible for conducting investigative work in order to resolve quality related problems on F-22 Raptor. Reviews customer suppliers and quality requirements to ensure correct clauses. Develop methods and procedures for in-process inspection, testing, configuration, reliability and evaluations of standard programs. Conducts NadCap Audits. Analyzes and collects data, submits information forms to managers and customer representatives. Creates ATP (Acceptance Test procedure) & ATDR (Acceptance Test Data Report) to present along with product to customers as required. Performed ISO 9000:2000 Quality Standard.

    ALLIANCE SPACESYSTEMS – Signal Hills, CA - 04/01– 05/05 Position: Senior Assembly Technician: Handle quality control documents and plan the modification and implementation of documents such as: blueprints, engineering orders and all quality control documents. Build, assemble, and modification of space satellite metal and composite structures, and related tooling for aerospace defense contractors. Handle composite panel for all five Mars rovers. Work in clean room environments with space assemblies and flight hardware. Start and complete work order instruction issued from engineers and lead assembly technicians. Performed sheet metal fabrications. Mix solvents and various bonding adhesives, i.e. Hysol. Review customer and government specs, MSDS manuals, AQMD regulations, composite materials and flight hardware specs. Assemble and disassemble of mechanical devices and space structures. Bonding of metal inserts onto composite and metal flight panels. Rivet shave surfaces, alodine, chem.-film, and acid etched various exposed metals.

    ARVAN, INC. –Gardena, CA - 4/99 – 04/01 Position: Senior Assembly Technician Design of customized ejection molding for aerospace defense contractors. Assembly of aluminum, fiberglass structures for commercial and military aircraft. Maintain parts inventory and monitor all levels of critical products released by engineering to sales staff. Sell engineering solutions and related peripherals to specific vendors.

    NORTHROP GRUMMAN- Hawthorne CA - 09/97– 04/99 Position: Aircraft Assembly Technician / Certified Airframe Mechanic- CAM Assembly of skin panels for Boeing 747 and F-18 Aircraft. Proposed cost reducing changes to manufacturing divisions. Conducted time study analysis of complex manufacturing processes. Drafted floor plans and planned immense structural changes to increase efficiency and recommended changes to be implemented company-wide.

    MC DONNELL DOUGLAS- BOEING COMPANY-LONG BEACH, CA-09/89 – 09/97 Position: Aircraft Airframe & Power-Plant Mechanic/Quality Engineer. Performed structural repairs and maintenance on commercial and military aircraft. Build aircraft wings, skin panels and aluminum frames on USAF C-17 and MD80/ 87 and DC-9 commercial aircraft. Supervised and performed various test engineering projects, which required operating specialized equipment. Documented and implemented sales plan to promote inventory control systems for aircraft part distributors.

    EDUCATION: Pasadena City College – Pasadena, CA Certificate in NASA DOD- 2000A Electronic Assembly and Wiring - 2008 Cerritos College - Cerritos, CA Certificate in ISO 9000- 2000, Composites Technology, TQMS - 2007 Southern California Occupational College - Torrance CA AutoCAD 2000 - 2001 Northrop University - Inglewood, CA FAA – Federal Exams Ground School- Graduate Airframe and Power Plant License - 1998 Certification of CAD design software programs – 1997 Fullerton College-Fullerton, CA Graduate of Fullerton Police Academy – 1996


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics