Latest Space News
Fri, 22 Mar 2019 09:54:03 +0000
The National Space Council will likely press NASA at its upcoming meeting to speed up its plans to return humans to the moon as the agency continues to study alternative approaches for the next flight of its Orion spacecraft. SpaceNews.com
Fri, 22 Mar 2019 03:11:03 +0000
European launch provider Arianespace conducted its third launch of the year March 21, orbiting a remote-sensing satellite for the Italian Space Agency on a Vega rocket. SpaceNews.com
Thu, 21 Mar 2019 23:22:21 +0000
The Canadian government has vowed to increase the level of funding for the development of low Earth orbit satellites that can bring internet services to rural parts of the country. SpaceNews.com
Thu, 21 Mar 2019 22:03:11 +0000
Even before the launch, NASA officials said there was already work identified before the Demo-1 flight that needed to get done before the agency would consider flying astronauts on board. SpaceNews.com
Thu, 21 Mar 2019 20:59:24 +0000
Federal Communications Commission officials urged patience with the repurposing process for satellite C-band spectrum, saying regulators are more concerned about getting it right than rushing the process. SpaceNews.com
Thu, 21 Mar 2019 20:36:32 +0000
The Germany space agency DLR is beginning a study this month on a reusable launcher concept that would use a winged first-stage booster captured on descent by an aircraft and towed back to land. SpaceNews.com
Thu, 21 Mar 2019 14:20:34 +0000
In the Q&A below Lesley touches on the mentor who inspired her, offers her perspective on women working in high tech careers and shares advice for those interested in building a career in the commercial space industry. SpaceNews.com
Thu, 21 Mar 2019 13:02:45 +0000
The question of how SMC is positioning itself for the future is gaining attention in light of the Pentagon’s decision to establish a Space Development Agency, which some view as a long-term existential threat to SMC. SpaceNews.com
Thu, 21 Mar 2019 09:54:31 +0000
Blue Origin has studied repurposing upper stages of its future New Glenn launch vehicle to serve as habitats or for other applications as part of a series of NASA-funded commercialization studies. SpaceNews.com
Wed, 20 Mar 2019 23:07:08 +0000
Acting Defense Secretary Patrick Shanahan says the U.S. has to "grow our margin of dominance in space." SpaceNews.com
Wed, 20 Mar 2019 22:42:02 +0000
The Space Development Agency officially came into existence last week and already is causing a stir. SpaceNews.com
Wed, 20 Mar 2019 20:13:58 +0000
Arianespace’s first Ariane 6 mission will carry 30 OneWeb satellites to low Earth orbit. The launch, slated for the second half of 2020, will use the “62” version of the rocket, which has two side boosters. SpaceNews.com
Wed, 20 Mar 2019 10:58:33 +0000
The National Space Council will hold its next public meeting March 26 to discuss NASA’s human space exploration plans. SpaceNews.com
Wed, 20 Mar 2019 02:17:55 +0000
Laser communications terminal provider Mynaric says it raised 11 million euros ($12.5 million) in post-IPO funding from a mystery constellation venture that plans to buy up to 1,000 terminals. SpaceNews.com
Tue, 19 Mar 2019 21:02:20 +0000
SpaceIL’s lunar lander performed a maneuver March 19 that puts the privately developed lander on course to enter orbit around the moon next month. SpaceNews.com
Tue, 19 Mar 2019 20:42:07 +0000
With two new satellites in orbit and a third on the way, APT Satellite of Hong Kong continues to grow, but company executives remain worried about Asia-Pacific market conditions. SpaceNews.com
Tue, 19 Mar 2019 20:10:11 +0000
Inmarsat said it remain in discussion with the consortium, which under British law has until April 16 to make a binding offer. SpaceNews.com
Tue, 19 Mar 2019 17:19:20 +0000
I’m a firm believer that the commercialization of space is absolutely essential for the growth of the space economy and achieving all of the goals we espouse for human activities in space. SpaceNews.com
Tue, 19 Mar 2019 16:34:45 +0000
Long before Ruag began producing structures for OneWeb communications satellites, the Swiss aerospace equipment supplier noted the market shift toward large constellations and began investing in automation. SpaceNews.com
Tue, 19 Mar 2019 15:17:20 +0000
Regardless of whether the Airbus-OneWeb joint venture gearing up to crank out dozens of satellites a month ultimately builds just 648 satellites or closer to the 900 originally envisioned, OneWeb’s constellation is the first such project large enough to truly incorporate aviation-style mass production procedures for spacecraft. SpaceNews.com
More space news...
19140 cvs - 858 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Development Engineer in Mechatronics

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:08-01-2017
     Last Modified:17-01-2017 (04:37)
    Job information
     Current job:Development Engineer in Mechatronics
     Employment Term:Either
     Job location:Anywhere
     Date available:within 2 months
     Industry:
     KeywordsFlight dynamics, Control systems, Flexible structure control,
    CV

    PERSONAL INFORMATION

     

     

     

    Sex: Male

    Date of birth: 19/04/1983

    Nationality: Czech

     

    POSITION

     

    WORK EXPERIENCE

     

    2015 - now

    Development Engineer – Mechatronics

    Porsche Engineering Services s.r.o., Mechatronics Department

    Highly non-linear and variable friction based system analysis

    High performance control system design for system with friction (ABS and braking performance enhancement feasibility study, torque vectoring)

    Electric drive-train vibration mitigation active control system design, analysis and validation

    Project management in R&D

    Project acquisition – project definition and analysis, estimation of work load, outline of the project, critical path definition and possible problem identification with mitigation measures suggestion

    Project management – requirement specification development and review, discussion with industrial and academia partners, project initialization and startup, project review, progress monitoring

    Autonomous driving control systems – C based programming language implementation

    Software testing, test drive and data analysis

    Business or sector Automotive Industry, R&D

    2013 - 2015

    Postdoc at Technical University of Denmark

    Technical University of Denmark, Department of Wind Energy, Wind turbine structures section

    Rigid body, as well as structural modes active control system development and analysis (Matlab&Simulink, Matlab Coder, FORTRAN)

    Non-linear actuator model implementation, control system design and analysis

    Aerodynamic model analysis and implementation for purposes of Kalman filter implementation

    Sensor data fusion for immeasurable disturbance estimation

    Implementation and validation of wind turbine multi-body/multi-domain non-linear aero-servo-elastic model (HAWC2)

    Closed loop system analysis based on high fidelity numerical simulations (Unix based cluster computations, shell scripting)

    Business or sector University, R&D

    2013

    Research Engineer

    LMS International A Siemens Business, Leuven

    Friction modeling, analysis and experimental test bench design for friction model validation

    Flexible structure dynamics analysis and numerical simulations performance

    Car flexible body vibrations mitigation control system design (Matlab, Ansys)

    Test scenario development, validation and assessment

    Rapid prototyping (Matlab, Real time Unix based operation system)

    Business or sector Automotive Industry, R&D

    2008 – 2012 Full time

    (2006 -2008 Part time)

    Researcher

    Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control

    Engineering, Aero-space group

    Flight mechanics modeling, analysis and validation

    Multi-body linearized dynamical model, considering flexible structure dynamics, analysis and simulation

    Control system development based on classical and modern control techniques (Matlab&Simulink)

    Optimization techniques – convex synthesis (actuators reference signal generation for feed-forward control) and actuator position optimization

    Implementation of non-linear actuator electro-servomechanism model for control system design, validation and assessment

    Case study implementation for demonstration and analysis purposes

    Results presentation

    Negotiation with project partners on technical and management level (mainly in English)

    Preparation and analysis of project work-flow, risk assessment and mitigation

    Project proposals preparation (three out of five were successful)

    Business or sector University, R&D

    2008 - 2012

    Teaching assistant

    Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control

    Engineering, Aero-space group; Erasmus mundus – SpaceMaster program consortium member

    Participated on the tutoring of master and bachelor level courses (including SpaceMaster) , namely:

    Aircraft and spacecraft control systems design (important coordinate systems introduction and transformation, rigid body flight mechanics introduction and model development, sensors and actuators introduction, control system development involving both, basic control techniques and optimization based methods, failure detection systems)

    Dynamical systems theory (analysis of non-linear and linear systems dynamics, modeling and identification techniques of dynamical system, simulations)

    Control systems

    Robust and optimal control system design

    Co-supervisor of several master thesis including SpaceMaster program students

    Business or sector University

    2010

    (6 months)

    Internship

    EADS Innovation work (now Airbus); Germany

    Complex linearized multi-body/multi-domain model analysis and validation.

    Design of a non-linear mathematical model of electrically driven actuators for the purposes of the ACFA 2020 project.

    Development of an aircraft robust control system for the purposes of fuel management strategy optimization.

    Development of a feed-forward Gust load alleviation system (European patent No. 11175857.9 -

    1239).

    Business or sector Industry, R&D

    2009

    (8 weeks)

    Internship

    Utah State University & Space dynamic Laboratory

    CubeSat flight dynamics analysis

    Sensors and actuators modeling and assessment

    CubeSat spacecraft attitude and structural vibration control system design and analysis

    Business or sector University

    2006 - 2008

    Researcher and developer

    Rockwell automation, Prague, Czech Republic

    Software development, testing and validation

    Testing, analyses and implementation of new technologies

    Business or sector Industry

     

     

    EDUCATION AND TRAINING

     

    2008-2012

    Doctoral degree (Ph.D.) – Control Engineering and Robotics

    EQF level 8

    Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control

    Engineering

    Courses: Adaptive methods of signal processing, Linear Matrix Inequalities, Linear systems, Aircraft control systems, Flexible structure control, Optimization methods

     

    Technical skills: Non-linear and linear dynamical systems modeling and analysis, Flight mechanics of a rigid body as well as flexible structure craft analysis, Dynamical model development based on physical insight, Control system development using classical as well as optimization based techniques, Optimization

    2002-2008

    Master degree (Ing.) – Control Engineering

    EQF level 7

    Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control

    Engineering

    Selected courses: Mathematics (6 semesters), Statistics, Linear algebra, Physics, Programming methodologies, Cybernetics and artificial intelligence, Theory of electro-magnetic field, Materials for electro-technics, Sensors and transducers, Data transmission, Radio detection and navigation, System reliability and quality management, Signal and image processing, Theory of dynamical systems, Non-linear systems, Optimal decision and control, Intelligent robotics, Robust control, etc.

     

    Technical skills: Non-linear aircraft dynamics model development and implementation in Matlab and Simulink, Flight scenarios simulations, Linearized flight dynamics model development, Extended Kalman filter development, sensors and actuators modeling

     

    PERSONAL SKILLS

     

    Mother tongue(s)

    Czech

    Other language(s)

    English, German (basic)

    Communication skills

    Negotiation with project partners – from project preparation and initial phase, trough design requirements update up to system validation and verification (Porsche Engineering, by participating in several industrial projects, ACFA2020, Fly-by-wire system for light combat aircraft and Stabilized platform for UAV aircraft)

    Results presentation and defense – Porsche Engineering , as a Ph.D. student via conference presentations, as a project member presenting project results

    Explanation of theoretical and practical aspect of problem – as teaching assistant explaining theory as well as formulate assignment of student projects , as a master thesis co-supervisor involved in numerous discussion with students, as a team member in industry discussing solution plans

    Organizational / managerial skills

    Leadership (as a teaching assistant responsible for class of 10 -20 students, as master thesis supervisor)

    Project management, proposal preparation including technical content, resources planning and finance (Porsche Engineering, as a Ph.D. student responsible for project application and participated on project management)

     

    ADDITIONAL INFORMATION

     

    Job-related skills

    Planning and Scheduling (as researcher at Porsche Engineering, CTU, LMS and DTU responsible for solution plan development and required resources allocation)

    Risk management/mitigation (as a researcher responsible for risk evaluation and possible mitigation)

     

     

    Digital competence

    SELF-ASSESSMENT

    Information processing

    Communication

    Content creation

    Safety

    Problem solving

     

    Proficient user

    Proficient user

    Proficient user

    Proficient user

    Proficient user

     

    Levels: Basic user  - Independent user  -  Proficient user

     

     

    Computer skills

    Programming languages – CAPL, C, C++, C#, Java, FORTRAN, Assembler, Pascal, PHP&SQL

    Professional command of Matlab & Simulink, Vector CANoe, Microsoft Office™ tools and LaTex

    Average command of Maple, HAWC2, PLC

    Basic command of Ansys, LabView, OrCAD and AutoCad

    Other skills

    Electronic system - Electronic circuits design and analysis techniques, assembly and diagnostics. Sensors and transducers, signal processing, data transmission, electrical measurements and instrumentation

    Independent study and information acquisition (scientific journals and books)

    Archery, swimming, airsoft, bush craft, skiing and diving

    Driving license

    A, B, Driver training for high power cars test drives

     

    ADDITIONAL INFORMATION

     

    Publications

    Projects

    Conferences

    References

    Publications:

    ▪ Haniš T. and Hromčík M.; Optimal sensors placement and spillover suppression, Mechanical Systems and Signal Processing, 28 (2012) 367–378.

    ▪ Haniš T. and Hromčík M.; Lateral control for flexible BWB high-capacity passenger aircraft; Proceedings of the 18th IFAC World Congress, 2011 [CD-ROM]. Bologna: IFAC, 2011, p. 7233-7237. ISBN 978-3-902661-93-7.

    ▪ Wildschek A., Hanis T. and Stroscher, F.; L infinity-Optimal Feed-forward Gust Load Alleviation Design for a large Blended Wing Body Airliner; 4th European Conference for Aerospace Sciences[CD-ROM]. SaintPetersburg: Eucass, 2011.

    ▪ M. A. Eder, F. Belloni,  A. Tesauro, T. Hanis; A multi-frequency fatigue testing method for wind turbine rotor blades; Journal of Sound and Vibration, Available online 2nd November 2016

     

    Patent:

    ▪ Wildschek A.and Haniš T.; Methods and apparatus for minimizing dynamic structural loads of an aircraft, EADS - IW, European patent No. 11175857.9 - 1239, Munich, 2011.

     

    Projects:

    ▪ Active control for flexible aircraft 2020 (ACFA 2020). EC funded (FP7), starting April 2008. Coordinator: EADS, Munich, Germany.

    ▪ Fly-by-wire system for light combat aircraft. Contractor: Aero Vodochody. Supported by Ministry of Industry and Trade Czech Republic.

    ▪ Stabilized platform for UAV aircraft. Contractor: VTUL PVO Prague, CZ.

     

    Conferences:

    ▪ European Conference for Aerospace Sciences 2009, 2011

    ▪ IFAC World Congress 2011

    ▪ European Control Conference 2009

     

    References:

    ▪ Prof. Ing. Michael Šebek, DrSc. (Head of Department of Control Engineering, CTU)

    ▪ Doc. Ing. Martin Hromcik, Ph.D. (Diploma/Dissertation theses supervisor, CTU)

    ▪ Dr. Andreas Wildschek (EADS internship supervisor)

    ▪ Dr. Martin A. Eder (Researcher at DTU Wind, colleague)

    ▪ Dr. Jan Rathousky (Team leader at Porsche Engineering Services)

     


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2019 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2019 Spacelinks
    Web Analytics