Latest Space News
Fri, 22 Jun 2018 00:04:04 +0000
The Falcon Heavy beat United Launch Alliance’s Delta 4 in a competition under the Evolved Expendable Launch Vehicle program. SpaceNews.com
Thu, 21 Jun 2018 23:41:21 +0000
To receive FIRST UP Satcom, a weekly SpaceNews newsletter for satellite and telecom professionals, sign up here. TOP STORIES Chinese hackers tried to gain control of U.S. satellites in late 2017, leading a cyber firm to notify the U.S. government. Symantec’s protection software blocked some of the tools used by attackers known as “Thrip” that attacked two […] SpaceNews.com
Thu, 21 Jun 2018 22:56:40 +0000
Blue Origin expects to start flying people on its New Shepard suborbital vehicle “soon” and start selling tickets for commercial flights next year, a company executive said June 19. SpaceNews.com
Thu, 21 Jun 2018 21:41:59 +0000
Canadian satellite antenna manufacturer C-Com said June 21 it successfully tested the building blocks of a phased array antenna it hopes to sell next year. SpaceNews.com
Thu, 21 Jun 2018 15:25:18 +0000
Rogers: Whether you call the new branch a Space Corps or a Space Force is not all that important. SpaceNews.com
Thu, 21 Jun 2018 10:45:26 +0000
A report released by the White House June 20 outlines a set of goals to address the small but “high-consequence” threat posed by near Earth objects (NEOs), but does not commit to spending more money to achieve them. SpaceNews.com
Wed, 20 Jun 2018 19:52:56 +0000
Former Air Force Secretary Deborah Lee James: "The Air Force and the DoD have to come up with something to back up what the president said.” SpaceNews.com
Wed, 20 Jun 2018 15:57:18 +0000
China has lowered the orbit of its Tiangong-2 space lab, likely in preparation for deorbiting the orbital facility and thus averting a similar scenario to the uncontrolled re-entry of Tiangong-1 earlier this year. SpaceNews.com
Wed, 20 Jun 2018 12:13:10 +0000
Those who loathe or love a Space Force “separate but equal” to the Air Force must think and act decisively and quickly. Regardless of whether the Space Force actually materializes, deliberation alone could finally spring us into action to deal with the looming threat of space Pearl Harbor. SpaceNews.com
Wed, 20 Jun 2018 11:12:05 +0000
An advisory group dubbed the “think tank” for the National Space Council formally kicked off its work June 19 with a broad but vague mandate to study space policy issues. SpaceNews.com
Wed, 20 Jun 2018 00:08:21 +0000
Fleet operators SES and Intelsat asked the U.S. Federal Communications Commission to extend the deadline for their customers to register C-band dishes before the commission decides on the band’s future use. SpaceNews.com
Tue, 19 Jun 2018 11:00:08 +0000
Trump’s proposal derives from a growing debate inside military and political circles about how to best meet the threat posed to American space assets by potential enemies: Russia and China, to be precise. SpaceNews.com
Tue, 19 Jun 2018 01:45:44 +0000
A former NASA astronaut used an appearance at a National Space Council meeting June 18 to argue that a key element of NASA’s plans to return humans to the moon should be reconsidered. SpaceNews.com
Mon, 18 Jun 2018 19:35:34 +0000
Trump: Creating a Space Force and promoting space exploration by NASA and the private sector will be “important for the nation’s psyche.” SpaceNews.com
Mon, 18 Jun 2018 13:22:16 +0000
President Trump will sign a new space policy directive June 18 addressing space traffic management issues, closely following the proposed policy that Vice President Pence announced in April. SpaceNews.com
Mon, 18 Jun 2018 08:45:21 +0000
A key senator says he’s keeping an open mind regarding who in the federal government should have responsibility for the oversight of “non-traditional” commercial space activities. SpaceNews.com
Sat, 16 Jun 2018 19:45:35 +0000
The House Appropriations defense subcommittee approved $49.5 million to create a new “program of record for commercial satellite communications." SpaceNews.com
Fri, 15 Jun 2018 20:23:14 +0000
As the National Space Council prepares for its third public meeting, its activities to date have won widespread praise in the space community, even as there is some skepticism about the effectiveness of the council’s advisory group that will soon meet for the first time. SpaceNews.com
Fri, 15 Jun 2018 11:00:25 +0000
A House hearing on the reasons for cost and schedule problems with major NASA programs pointed blame at a wide variety of sources, from the tools used to track programs to the agency’s mindset to Congress itself. SpaceNews.com
Thu, 14 Jun 2018 19:59:03 +0000
Astranis, a startup developing geostationary satellites to offer broadband internet access, plans to equip its MicroGEO spacecraft with Bradford of the Netherland’s high performance green ECAPS thrusters. SpaceNews.com
More space news...
18655 cvs - 792 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Materials Engineer

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:14-01-2017
     Last Modified:16-01-2017 (05:43)
    Job information
     Current job:Materials Engineer
     Employment Term:Permanent
     Job location:Anywhere
     Date available:within 2 months
     Industry:
     KeywordsMaterials Engineer- Stuctural composites
    CV

    Course: M.S in Functionalized Advanced Materials Engineering (Erasmus Mundus- European joint masters)

    Bachelor of Science (Research) in Materials Science (2015)

    Date of birth: 07/10/1993

     

    Masters (M.S) M2: Technical University of Darmstadt TU Darmstadt (Germany) 2016-17

    Masters (M.S) M1: Grenoble INP France Grenoble PHELMA (France) 2015-16 13/20

    Bachelors (B.S) Indian Institute of Science, Bangalore Indian Institute of Science (India) 2015 6/8

    Intermediate/+2 Maharashtra Board (HSC) Bytco Science College (India) 2011 90 (science)

    Matriculation Maharashtra Board (SSC) K.N. Kela High School (India) 2009 93

     

    Key Scholastics Achievements

    Selected for prestigious Erasmus Mundus Masters course (FAME- Functionalised Advanced Materials Engineering)

    Recepient of prestigious INSPIRE fellowship, Department of Science & Technology (DST), Govt. of India [2011–2015]

    Secured All India Rank 219 in All India Engineering Entrance Examination (AIEEE) [2011]

    Secured All India Rank 576 in Indian Institute of Technology Examination (IIT-JEE) [2011]

    Awarded Gold Medal for Best Outgoing Student in class X [2009]

    Secured Distinction in Australian National Carbon fibre Quiz [2015]

     

    Research Interests

    Thin films: Thin films growth, residual stresses, techniques like Liquid Phase Epitaxy, surface energy calculations etc

    Structural Materials – Materials solution in aerospace industries tailored Composites, Carbon fibre reinforced polymer, Inconel

    718 alloys- fatigue, corrosion, thermal barrier coatings, Non Destructive Test ultrasound to detect cracks

    Thermal Physics – thermal stresses, heat dissipation, material thermodynamics and stabilities by Ellingham diagrams

     

    Technical skills

    Programming Languages: C, Verilog

    Softwares: Catia V5, Solidworks, Workbench, Nastran, Patran, MATLAB,LATEX Quartus II, M-S Office, Origin 8.5, photoshop

    Materials Techniques: Galvanic coupling tests, LBM, EBM, characterization: SEM, TEM, XRD, UTM machines, fatigue, microstructural image analysis, AFM etc

     

    Internships

    AIRBUS SAFRAN LAUNCHERS, Vernon, FRANCE [May 2016–Sept 2016]

    Guide: Mr Raphael Salapete (Project Manager, Materials and Processes Division)

    Topic: Additive Manufacturing of Inconel 718 using Biomimicry concepts and Hot isostatic pressing

    Airbus Safran launchers is a company with a joint venture by aerospace giants like AIRBUS and SAFRAN working in Space Engines Division dedicated to defence sector in Vernon, France.

    Description–The project aimed at using a Biomimicry concept, taking inspiration from nature and using it into a rocket engine part. The design were done on CATIA software, and all the fabrication was done using Selective laser melting (Additive manufacturing). The concept formulation, design, mechanical simulations, fabrication, mechanical behaviour test. Representing Safran and presenting research at International Biomimicry Exposition held in Paris, France.

     

    GENERAL ELECTRIC (GE), John .F. Welch Technology Centre, Bangalore, INDIA [May 2014–July 2014]

    Guide: Dr. Anand Krishnamurty (Chief Consulting Engineer, Power and Water Division, GE Bangalore)

    Topic: Water Droplet Erosion Resistant Materials for Wet Compression Program of gas turbine engines

    Early Identification Program, EID Scholar– My job was to solve the materials related issues (erosion, corrosion and fatigue) occuring because of wet compression technique used to increase the efficiency of gas turbines. My work on GE proprietary coatings showed 4-5x improved erosion properties and made it a front runner as a potential solution for a US PATENT. This coating is a possible candidate for Patent and is in design review because no such coatings simultaneous provides good results in erosion, corrosion and fatigue.

     

    Electrical Engineering Department, Indian Institute of Technology, Bombay, INDIA [May 2012–July 2012]

    Guide: Prof. M. B. Patil

    Topic: Electronic Design using DSP, FPGA, CPLD and microcontroller through simulation and direct access to hardware design

    Developed tutorials to teach Electronic design and Simulation using open source softwares. (CPLD, FPGA)

    Metallurgical Engineering and Materials Science Department, IIT Bombay, INDIA [May 2013–July 2013]

    Topic: Fabrication, processing and detection of weak bonds on carbon fibre composites

    CFRP sample preparations with varied bond strength and in depth study for laser properties in order to create detection of weak bonds. Detection of weak bonds by utrasound testings

     

    Academic Projects

    Research Assistantship (Technical University of Darmstadt, Germany) [Oct 2016– Feb2017]

    Guide: Prof.Rodel and Prof. Oliver Clemens (Materials Engineering Dept, TU Darmstadt, Germany)

    Topic: Ceramic Polymer composites- Binder optimisation and Reinforced polymers

    Binder and processing parameters optimisation, debinding chemistry and optimum weight reducing vibrational experiments

     

    Final Year Project (IISc, INDIA) [Aug 2014– Aug 2015]

    Guide: Prof. Vikram Jayaram (Chairman Materials Engineering Dept, Indian Institute of Science)

    Topic: Novel geometry for stable crack propagation: Fracture toughness using a clamped beam bend geometry

    Recently, a new geometry has been developed that allows for stable crack propagation under constant load, i.e., keeping the load fixed, the crack driving force actually drops as it propagates.To validate that as driving force decreases the geometry can essentially be used to determine fracture toughness of all material classes.

     

    "PADARTH"- Energize Competition, Indian Institute of Technology, Bombay, INDIA [March 2013]

    Guide: Prof. Vikram Jayaram (Chairman Materials Engineering Dept, IISc)

    Gave a presentation on Microbial Biofuels: Exploiting the microcosm within to improve Hydrogen output.

    My model mainly dealt with the application of materials science into the maximisation of the microbial biofuel output that can impart a substantial level of sustainability and self-reliance to economies within the purview of declining non-renewable resources of major fuels like hydrogen, by taking a balanced, unbiased view of the current energy scenario.Selected in Finals- top10 of Energize competiton, IITB 2013 and represented IISc amongst 120 teams nationwide.

     

    Courses Undertaken

    Technical University of Darmstadt, GERMANY: Materials Thermodynamics, Corrosion and Electrochemistry, Ceramic Processing and synthesis, Surface Science, Micromechanics of materials, functional ceramics, research labs consisting of PLD

    (Pulsed Laser Deposition), spectroscopic analysis, XRD, Magnetic force microscopy etc.

    Grenoble Institute of Technology, FRANCE: Nonotechnology, Solid state physics, numerical methods, thin films, materials selection and design, phase transformations, solid state chemistry, marketing etc.

    Indian Institute of Science, INDIA: Mechanical behaviour of materials, electronic properties, finite element analysis, algorithms and programming, materials kinetics, thermodynamics, polymers-I and II, polymer blends and nano-composites, modelling and simulation of dynamic systems, scientific computing, materials processing, characterization, solid mechanics, and all basic undergraduate level course in physics, maths, chemistry.

     

    References

    Mr LAITHIER Frederic: frederic.laithier(at)airbusafran-launchers.com (Airbus Safran Launchers,Vernon France)

    Mr SALAPETE Raphael: raphael.salapete(at)airbusafran-launchers.com (Airbus Safran Launchers, Vernon France)

    Prof SARIGIANNIDOU Erini: eirini.sarigiannidou(at)phelma.grenoble-inp.fr (Grenoble INP, France)

    Dr. Anand Krishnamurty: k.anand(at)ge.com (General Electric, Bangalore)

    Prof Rudra Pratap (Chairman CeNSE, IISc), Prof Vikram Jayaram (Chairman Materials engg, IISc), Prof Bikramjit Basu (Materials research centre, IISc), Prof. Ravishankar (Materials research centre, IISc


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2018 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2018 Spacelinks
    Web Analytics