Composite Structures Designer and Analyst, Avio S.p.A., Colleferro, Rome, Italy.
Involved in the design, testing and development of composite structures for solid rocket motors, mainly motor cases for VEGA’s solid stages and future projects (Ariane 6, VEGA-C).
Filament wound composite vessels design: winding trajectory design and stability, FEM verification
Nonlinear static and buckling structural analysis, static design for composite and metal structures
Damage tolerance, draping analysis and layup design for composite components
Responsible for filament wound vessel instrumentation by means of Fiber Bragg Gratings and OFDR
Missile systems’ fin structures technical expert
P120C igniter proposal, structural design responsible
P120C IMC-CP responsible for stress analysis and involved in structural design
Design responsible for VEGA-C Base Covers composite structures
Non-conformities treatement (filament wound vessels, missile systems’ fins, VEGA Base Covers)
Conception and follow-up of expertise plans on production anomalies
Instrumentation plans and follow-up of acceptance and qualification tests for filament wound vessels
Technical notes, analysis and test reports, design justification files
Statements of work (technical aspects and planning); Development and implementation plans
Master in Additive Manufacturing 2016, held in Rome, hosted by Centro Sviluppo Materiali with partnership of Italian leader companies in additive manufacturing.
M.Sc. in Aeronautical Engineering, "Sapienza" Universitá di Roma, final mark: 110/110 cum laude (equivalent to First-Class Honours with Distinction).
Thesis title: Theoretical and numerical approaches for impact load identification on an aerospace structure. Correlation with experimental data. Advisors: Prof. Franco Mastroddi, Ms. Claudia Di Trapani (Avio S.p.A.), Mr. Mauro Linari (MSC.Software)
The thesis arose under a request by Avio S.p.A. in order to investigate an impact issue on the VEGA launcher’s first stage solid rocket motor (P80). The objective was to develop a procedure to identify impact load and position given the experimental acceleration data referred to the phenomenon. Data were analyzed by means of theoretical tools, then numerical simulations were run on a FE Model of the motor to maximize the numerical - experimental correlation: a sensitivity analysis and an optimization process led to the impact load and location, and a fully nonlinear explicit dynamic analysis served to verify the obtained results, which were found to be successfully correlated to the experimental data.
B.Sc. in Aerospace Engineering, "Sapienza" Universitá di Roma, final mark: 110/110 cum laude (equivalent to First-Class Honours with Distinction).
Thesis title: Linear static and dynamic FEM analyses of Airbus A380’s wing.
Scientific certificate (italian secondary school diploma), Liceo Scientifico "L. Spallanzani", Tivoli, final mark: 100/100 cum laude.
"Filament Wound Solid Rocket Motor Vessels Strain Measurement and Potential Structural
Health Monitoring trough Fiber Optics", G. Fabbi, M. Ciminello, A. Mataloni, P. Perugini,
A. Sorrentino, A. Concilio.
Paper presented at Space Propulsion 2016 conference (Rome, 2-6 May, 2016).
"Theoretical and Numerical Approaches for Impact Load Identification on an Aerospace
Structure. Correlation with Experimental Data", G. Fabbi.
Paper developed on the basis of the Master’s Thesis for participating to the 10th Pegasus-AIAA student conference, then chosen to be presented in the 2015 AIAA International Student Conference (award winner). Included in the proceedings of AIAA SciTech 2015 (53rd AIAA Aerospace Sciences Meeting).
Competitions, experiences and awards
First Prize in the 2015 AIAA International Student Conference (Graduate
Division), held in Kissimmee, FL, in the framework of the AIAA SciTech 2015 Conference. Contest between best papers from all AIAA Regional Student Conferences. Participating as winner of the Pegasus-AIAA Student Conference (AIAA Region VII - International).
Skills acquired: written and oral communication skills, international experience
Awarded as excellent graduate at "Sapienza" Universitá di Roma, academic honour for 400 best graduates in the whole university in academic year 2012-2013.
First Prize in the 10th Pegasus-AIAA Student Conference, held in Prague.
Pegasus students and European AIAA student members are asked to present technical papers in public competition for 1st, 2nd and 3rd place prizes. After being selected by their home universities, 32 participants attended this edition.
Skills acquired: written and oral communication skills, international experience
Involved in the Excellence Programme for Sapienza Aerospace students, academic programme for best students in Aeronautical Engineering and Space Engineering at "Sapienza" Universitá di Roma.
Member of Sapienza Aerospace Student Association (SASA), AIAA student branch, organization involved in promoting lectures, conferences and outdoor activities related to the aerospace sector.
Chief Engineer and Structures Lead of Sapienza Flight Team, partecipating to AIAA Cessna Aircraft Company/ Raytheon Missile Systems - Student Design/Build/Fly Competition hosted in 2013 by Raytheon Missile Systems in Tucson, AZ. DBF contest provides a real-world aircraft design experience for engineering students, who have to design, test, fabricate, and demonstrate the flight capabilities of an unmanned, electric powered, radio controlled aircraft that can best meet the specified mission profile.
Technical report rank: 2nd over 81 teams. Final rank: 13th over 81 teams.
Responsibilities: project technical development, aircraft optimization, stress analysis, structural design, material selection, UAV building.
Skills acquired: aircraft and mission modeling for optimization purposes, attitude at leadership.
MSC.Software University Roadshow: CAE evolution in aerospace industry,
Speaker and auditor, also participant to the FEM-Multibody Workshop.
Stress and CAD Engineer for Sapienza Flight Team (SFT), participating to AIAA DBF hosted in 2012 by Cessna Aircraft Company in Wichita, KS.
Responsibilities: stress analysis (FEM analysts leader), structural design, CAD, UAV building.
Skills acquired: composite materials analysis and fabrication, team-working.
Member of voluntary association "Lolek", providing dining service for homeless and old people, blood donations and theatrical performances.
Winner of a grant as one of the "Best Students" during high school period, annual money prize set by the Italian Ministry of Education for students achieving diploma with full marks.
Member of "L. Spallanzani" high school selection participating to the Italian
Maths Olimpic Games - Team Contest, with the following results:
2007 - Winner of the local round, participant to the regional round.
2008 - Winner of the local and regional rounds, participant to the national round in
Cesenatico, FC, Italy.
In the ranking of excellence in the national contest "Europe and young
people 2007", where students were asked to develop works fostering European culture.
Fluent in spoken and written language.
Intermediate knowledge of spoken and written language.
Excellent knowledge of Nastran, Patran, Ansys Mechanical, Marc, Mentat and LS-Dyna (as integrated in MSC.Nastran SOL 700) FEM softwares, filament winding design softwares such as Composicad and Arianna, C++ programming language, Matlab suite, Microsoft OS Windows 98/ME/XP/Vista/7/10 and Office products Word, Excel and Power Point.
Past experience on Hypermesh, Femap, LMS Test.Lab, Catia, LS-PrePost, Simulink, ADINA, COMSOL and Mathematica softwares, Nastran DMAP and Fortran programming languages.
Stress analysis and structural design
Strong experience on composite materials
Winding and draping analyses for composite materials
Excellent IT skills
Proven remarkable written and oral communication skills
Able to work individually or in a team, under pressure and with scheduled tasks
Serious, meticulous, polite and ambitious
Team-working and proven attitude in leadership
Hard-worker, always engaged in learning and self-improvement
Football player for 10 years, jogging practicer and lover of sports in general.
Detective and historical novels.
Enjoy places and works of art in other countries.
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £350 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!
2017 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
|6 months - Silver||1950 euros||convert|
|12 months - Gold||3200 euros||convert|
If online payment is not convenient, give us a call at +33(0)562211007 or send us an email at firstname.lastname@example.org. We will set up an account for you and invoice you. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)562211007.
Support is available Mon-Fri on +33(0)562211007 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing email@example.com. Accounts found not to be in compliance will be deleted.