Latest Space News
Thu, 21 Mar 2019 22:03:11 +0000
Even before the launch, NASA officials said there was already work identified before the Demo-1 flight that needed to get done before the agency would consider flying astronauts on board. SpaceNews.com
Thu, 21 Mar 2019 20:59:24 +0000
Federal Communications Commission officials urged patience with the repurposing process for satellite C-band spectrum, saying regulators are more concerned about getting it right than rushing the process. SpaceNews.com
Thu, 21 Mar 2019 20:36:32 +0000
The Germany space agency DLR is beginning a study this month on a reusable launcher concept that would use a winged first-stage booster captured on descent by an aircraft and towed back to land. SpaceNews.com
Thu, 21 Mar 2019 14:20:34 +0000
In the Q&A below Lesley touches on the mentor who inspired her, offers her perspective on women working in high tech careers and shares advice for those interested in building a career in the commercial space industry. SpaceNews.com
Thu, 21 Mar 2019 13:02:45 +0000
The question of how SMC is positioning itself for the future is gaining attention in light of the Pentagon’s decision to establish a Space Development Agency, which some view as a long-term existential threat to SMC. SpaceNews.com
Thu, 21 Mar 2019 09:54:31 +0000
Blue Origin has studied repurposing upper stages of its future New Glenn launch vehicle to serve as habitats or for other applications as part of a series of NASA-funded commercialization studies. SpaceNews.com
Wed, 20 Mar 2019 23:07:08 +0000
Acting Defense Secretary Patrick Shanahan says the U.S. has to "grow our margin of dominance in space." SpaceNews.com
Wed, 20 Mar 2019 22:42:02 +0000
The Space Development Agency officially came into existence last week and already is causing a stir. SpaceNews.com
Wed, 20 Mar 2019 20:13:58 +0000
Arianespace’s first Ariane 6 mission will carry 30 OneWeb satellites to low Earth orbit. The launch, slated for the second half of 2020, will use the “62” version of the rocket, which has two side boosters. SpaceNews.com
Wed, 20 Mar 2019 10:58:33 +0000
The National Space Council will hold its next public meeting March 26 to discuss NASA’s human space exploration plans. SpaceNews.com
Wed, 20 Mar 2019 02:17:55 +0000
Laser communications terminal provider Mynaric says it raised 11 million euros ($12.5 million) in post-IPO funding from a mystery constellation venture that plans to buy up to 1,000 terminals. SpaceNews.com
Tue, 19 Mar 2019 21:02:20 +0000
SpaceIL’s lunar lander performed a maneuver March 19 that puts the privately developed lander on course to enter orbit around the moon next month. SpaceNews.com
Tue, 19 Mar 2019 20:42:07 +0000
With two new satellites in orbit and a third on the way, APT Satellite of Hong Kong continues to grow, but company executives remain worried about Asia-Pacific market conditions. SpaceNews.com
Tue, 19 Mar 2019 20:10:11 +0000
Inmarsat said it remain in discussion with the consortium, which under British law has until April 16 to make a binding offer. SpaceNews.com
Tue, 19 Mar 2019 17:19:20 +0000
I’m a firm believer that the commercialization of space is absolutely essential for the growth of the space economy and achieving all of the goals we espouse for human activities in space. SpaceNews.com
Tue, 19 Mar 2019 16:34:45 +0000
Long before Ruag began producing structures for OneWeb communications satellites, the Swiss aerospace equipment supplier noted the market shift toward large constellations and began investing in automation. SpaceNews.com
Tue, 19 Mar 2019 15:17:20 +0000
Regardless of whether the Airbus-OneWeb joint venture gearing up to crank out dozens of satellites a month ultimately builds just 648 satellites or closer to the 900 originally envisioned, OneWeb’s constellation is the first such project large enough to truly incorporate aviation-style mass production procedures for spacecraft. SpaceNews.com
Tue, 19 Mar 2019 15:02:24 +0000
Engineers are still trying to understand why one of the main instruments on NASA’s InSight Mars lander is stuck just below the Martian surface. SpaceNews.com
Tue, 19 Mar 2019 11:01:24 +0000
While NASA’s overall planetary sciences program is enjoying record funding levels, the agency is grappling with cost growth in two of its largest missions. SpaceNews.com
Mon, 18 Mar 2019 20:06:00 +0000
In a letter to Shanahan, lawmakers point out New Mexico is home to dozens of space-focused government and private sector organizations. SpaceNews.com
More space news...
19140 cvs - 854 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Mechanical Engineering graduate

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:13-04-2017
     Last Modified:03-05-2017 (04:03)
    Job information
     Current job:Mechanical Engineering graduate
     Employment Term:Temp/Contract
     Job location:US only
     Date available:immediately
     Industry:Satellite Manufacturers and Subcontractors, Satellite Operators, , , Launch Systems, Consulting/Engineering Services, Space Tourism
     KeywordsRecent Graduate, Passionate about space related works. I have a bachelor degree in Aeronautical Engineering and masters degree in Mechanical Engineering. Have an experience working as a Graduate Research Assistant, where I worked on Various NASA Grant Stu
    CV

    Objective:          Seeking an opportunity as an entry level Engineer in an Aeronautical field, which would utilize my knowledge in CAD designing and aerodynamics.

     

     

    Education:

    University of Bridgeport       Bridgeport, CT

    Masters in Mechanical Engineering GPA (3.7/4)      Dec,2016

    Srinivasan Engineering college      Perambalur, India Bachelors in Aeronautical Engineering GPA (8.3/10)         May,2013

    Key Skills:

    Technical expertise in Auto CAD, CATIAV5 (Part, surface and assembly), Solid works, ANSYS FEA (static structural and CFX), 3-D Printing (Makerbot), Wind tunnel testing and MS office.

    Good experience in Aircraft design projects, Performance and structural analysis, PDR, CDR documentation.

     

    Course Work:

    CAM and automation, advanced heat transfer, aerodynamics, flight dynamics, aircraft structures, propulsion, finite element method, advanced fluid dynamics, computer aided design, project management and satellite technology.

     

    Projects:

    Master’s Project (Design and analysis of an adaptable winglet)               Bridgeport, CT

    Designed a winglet using CATIA V5, adaptable for all phases in aircraft          Aug 2016 – Dec 2016   

    mission to enhance performance and fuel efficiency by reducing the parasite drag.

    Analyzed the design using ANSYS CFX and attained better performance.

    Empennage Design Inspired from Bird              Bridgeport, CT

    Designed a tail section to reduce the structural complex and aircraft stabilizer           Aug 2016 – Dec 2016

    area by combining the horizontal and vertical stabilizer

    Achieved combined performance of directional and longitudinal control surfaces into single control surface.

    High Altitude Student Platform (NASA Grant)            Bridgeport, CT

    Designed the payload structure with the use of tool (CATIA V5) based on          Mar 2016 – Dec 2016

    the requirements from the HASP proposal

    Payload structure and components was examined to ensure their performance at space temperature.

    Cansat Competition (Sponsored by AAS)            Bridgeport, CT

    Created a preliminary design for small satellite payload                Nov 2015 – Jun 2016

    Figured out the release mechanism, design of glider and the components used for descent control.

    Bachelor’s Project (Design optimization of wing spar)                Bangalore, India

    The spar beam is designed into yield at the design limit load                    May 2013

    Optimized the design and compared with the conventional design approach for weight saving.

     

    Work

    Experience:

    University of Bridgeport, Mechanical Engineering Department                Bridgeport, CT

    Graduate Research Assistant under Dr. Jani Macari Pallis               May 2015 – Dec 2016

    Built the payload for NASA Total Solar Eclipse ballooning (CT Space Grant)

    Worked on NASA Rocketry along with Discovery Museum (NASA Grant)

    Contributing the design and thermal control for CubeSat – Launch 2018

    Generated a report about remote satellite sensing of Lyme disease indicators

    Created course syllabus and curriculum in Aerospace, Propulsion, High Altitude Ballooning for Fairchild Wheeler Inter District Magnet high school (NSF Grant).

     

    Achievement:

    Presented a poster at NASA Connecticut Space Grant Consortium about HASP               Hartford, CT

    University of Bridgeport Graduate Assistant of the year 2016                  Bridgeport, CT

    Academic Accomplishment award from Who’s Who among American Universities and Colleges    Bridgeport, CT

    Engineering Services award              Bridgeport, CT

    Academic Accomplishment award for NASA High Altitude Student Platform             Bridgeport, CT

    Involvement

    Volunteered in High Altitude Balloon launch which reached an altitude of 89,000ft on behalf of

    University of Bridgeport with Discovery Museum and Planetarium             Bridgeport, CT

    Collegiate member in Aerospace, SWE, and NSBE club          Bridgeport, CT

    Participated in Balsa Wood Glider Modelling             Coimbatore, India

    Attended National Level Helicopter workshop           Coimbatore, India


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2019 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
    Recruitment agencies are only eligible for a Gold package and recruitment agencies recruiting for companies already using Space Careers will not be accepted.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2019 Spacelinks
    Web Analytics