Latest Space News
Thu, 20 Feb 2020 18:44:36 +0000
Intelsat on Feb. 19 urged the FCC to give the company at least $1 billion more of $9.7 billion in proposed compensation for clearing C-band spectrum for 5G networks and to treat the C-Band Alliance Intelsat formed with rivals SES and Telesat as essentially dead.
Thu, 20 Feb 2020 18:17:04 +0000
Building a military space culture may not require mass transfers of Army, Navy units to the Space Force
Thu, 20 Feb 2020 12:30:53 +0000
Vice President Mike Pence said in a Feb. 19 speech that the administration’s budget proposal for NASA to support a human return to the moon by 2024 has bipartisan support, a claim echoed by NASA despite criticism about some proposed cuts in the bill.
Thu, 20 Feb 2020 00:25:55 +0000
The “United States Space Force Vision for Satellite Communications” was approved by Gen. John Raymond on Jan. 23.
Wed, 19 Feb 2020 23:20:35 +0000
Spaceflight Industries’ decision to sell its rideshare launch services company, Spaceflight, to two Japanese firms will benefit both Spaceflight and its parent company, executives of the two companies say.
Wed, 19 Feb 2020 22:56:13 +0000
China launched a Long March 2D rocket from its inland Xichang launch center Wednesday, marking a return to activity following the Chinese New Year.
Wed, 19 Feb 2020 21:48:29 +0000
The Colorado Springs Chamber & EDC kicked off a $350,000 national public relations campaign.
Wed, 19 Feb 2020 20:14:47 +0000
Lockheed Martin says it lost $410 million on the first three commercial satellites built on its new LM2100 platform, including the JCSAT-17 satellite Arianespace launched Feb. 18 on an Ariane 5 rocket.
Wed, 19 Feb 2020 14:46:43 +0000
The head of NOAA’s space weather office used a recent hearing to caution that a failure of an aging spacecraft in the next few years could leave the agency “hurting a little bit” in its ability to monitor solar activity.
Wed, 19 Feb 2020 01:55:21 +0000
With just a week before the first scheduled launch in DARPA’s responsive launch competition, the agency is tweaking the rules to allow the sole remaining company to perform both launches from the same spaceport.
Tue, 18 Feb 2020 23:57:21 +0000
Arianespace completed its third launch of the year Feb. 18, sending a Japanese communications satellite and a South Korean weather satellite into geostationary transfer orbits.
Tue, 18 Feb 2020 20:11:09 +0000
Radio-frequency-mapping startup Kleos Space on Feb. 18 said it received a $3.4 million loan from Dubai-based Winance to keep the company “well funded” while it awaits the launch of its first satellites.
Tue, 18 Feb 2020 17:41:36 +0000
Space Adventures announced Feb. 18 that it has an agreement with SpaceX to fly a dedicated Crew Dragon mission that would send four space tourists on a mission to a relatively high Earth orbit.
Mon, 17 Feb 2020 22:11:05 +0000
In a recent SpaceNews Op-ed, Louis Friedman, co-founder and executive director emeritus of The Planetary Society, argues that the U.S. should pursue “a policy more directed to Mars and away from commercial participation. With all due respect to Friedman, I totally disagree. Focusing NASA programs on distant (in space, time, and money) goals can only ensure that U.S. space policy remains empty talk with no action.
Mon, 17 Feb 2020 21:16:20 +0000
Blue Origin formally opened a factory Feb. 17 that the company plans to use to produce engines both for its vehicles and for United Launch Alliance’s Vulcan rocket.
Mon, 17 Feb 2020 21:05:51 +0000
Intelsat has abandoned plans to order a one-for-one replacement for the Intelsat-29e satellite that failed last year and will rely instead on leased capacity, a borrowed satellite, and the newly ordered Intelsat-40e spacecraft to fill a coverage gap over North and South America.
Mon, 17 Feb 2020 18:57:13 +0000
SpaceX completed its fifth dedicated Starlink launch Feb. 17, successfully sending 60 satellites into low Earth orbit while missing what would have been the company’s 50th booster recovery.
Sun, 16 Feb 2020 20:46:33 +0000
China has quietly rolled out a new Long March 7A rocket at a coastal launch site in preparation for launch of a ‘technology verification satellite’.
Sun, 16 Feb 2020 14:42:14 +0000
The Commerce Department is once again requesting a large budget increase for its Office of Space Commerce in order to work on space traffic management activities after Congress rejected a similar request last year.
Sat, 15 Feb 2020 22:00:44 +0000
A Cygnus cargo spacecraft launched Feb. 15 carrying more than three tons of supplies and experiments for the International Space Station.
More space news...
19621 cvs - 571 jobs


  • HOME

  • HOME
  • CV: Mechanical / Robotics Engineer

    Printer Friendly

    << BACK

    Personal information
    Contact information
    Candidate Profile
     Date Submitted:30-06-2019
     Last Modified:06-08-2019 (01:18)
    Job information
     Current job:Mechanical / Robotics Engineer
     Employment Term:Temp/Contract
     Job location:Europe only
     Date available:within a month
     Keywords- Software: Python / C++ / MATLAB / ROS / OpenCV - Mechanical: Catia / Solidworks


    A recent ambitious and industrious mechanical engineer from Arts et Metiers ParisTech (France), pursuing a Robotics MSc at Cranfield University to delve into robotics control and artificial intelligence. Consistently striving to strengthen CATIA V5 design skills and MATLAB, C/C++, Python 3.3, ROS programming skills, acquired from academic achievements and various internships.

    Driven by space exploration, challenging projects and teamwork, relying on an open-minded, determined and resilient attitude to demonstrate creative problem-solving approaches to meet the goals.

    Definitely a French linguaphile, with professional competency in English, conversational German and Japanese, developed through travels and educational experience.



    Managed and led a 3-student team to the finals of “Olympiades de Sciences de l’ingénieur” – a French national and annual competition promoting innovation and technology – by thoughtfully assigning the roles within the team, organising the schedule, and ensuring communication between the teachers and the team.

    Inspired 350 students to develop a professional attitude, enhance their soft skills, and find internships or jobs, as President of corporate relations at Arts et Metiers ParisTech, by organising business lunch events, conferences, company site visits, workshops and job fairs.

    Elected Student Representative at Arts et Metiers ParisTech and Cranfield University, endeavouring to enhance educational experience through communication, self-reflection and oriented feedbacks.



    MSc in Robotics: Cranfield University, Cranfield, UK (Oct 2018 – Sep 2019)

    : Fundamentals of Robotics, Robotics Control, Artificial Intelligence and Machine Learning for Robotics, Programming Methods for Robotics, Human-Robot Interaction, Machine Vision for Robotics, Autonomy in Robotic Systems, Psychology, Ethics and Standards.

    : Member of Cranfield Students for the Exploration and Development of Space (CranSEDS), currently taking part in the Olympus Rover Trials challenge aiming at constructing and operating a rover for an analogue sample return mission to Mars. My focus lies in the design of the robotic arm to catch the samples, and its control.

    Member of Unmanned & Intelligent Systems (UIS) Society, taking part in the Unmanned Aircraft Systems (UAS) Challenge based on the development of an autonomous drone able to perform rescue tasks. My focus lies in image recognition and telecommunications (ground control station).

    Group Design Project: Ball catching robot based on systems control approach, enhanced with reinforcement learning, developed using ROS and carried out by a 3-student team (Feb 2019 – May 2019).

    Individual Thesis: Accurate localisation system for tank-inspection crawlers, enhanced with artificial intelligence, supervised by InnotecUK – Cambridge, United Kingdom (May 2019 – Sept 2019).


    Mechanical Engineering degree: Arts et Metiers ParisTech, Cluny, France (Sep 2015 – Sep 2018)

    : Solid Mechanics, Material Science, Mathematics and Computer Science, Management Sciences, System Design and Manufacturing, Energetics, Electronics & Automatics, Robotics Control (Linear, Non-linear, Adaptive, Hybrid, Robust, Optimal), Biosystems Engineering.

    Group Project: Design of a hydraulic press for workshops (5-student team, 90 hours).

    My focus lied on the management of the team, the dimensioning and the simulation of the product.

    Individual Thesis: Tokyo Institute of Technology, Tokyo, Japan (Sep 2017 – Sep 2018). Bio-inspired jumping robot focusing on an alternative way of locomotion for space exploration, simulated with MATLAB.




    InnotecUK: Cambridge, UK – Mechanical/Robotics engineer (May 2019 – Aug 2019)

    InnotecUK is a research and innovation company specialised in in the development and commercialisation of novel solutions to overcome complex industrial challenges through Robotics and Automation. It employs 41 people and had a turnover of 1.6 million pounds in 2018.

    Developing an accurate localisation system for tank-inspection crawlers. The task involves system concept proposals, the design of a CAD model (Solidworks), the integration of the sensors (Arduino, C++), the production of the system and its evaluation.


    Capgemini Applied Innovation Exchange: Suresnes, France – Design and Development Engineer Assistant (Jun 2017 – Aug 2017)

    Established in 1967, Capgemini is a global leader in consulting, IT services and outsourcing, with more than 190,000 collaborators in 44 countries, and a turnover of 12.5 billion euros in 2016. The AIE are innovation centres where new technologies are tested and applied to company projects.

    Delivered a mobile application for connected Stadium, based on Ionic v2, and in partnership with Credit Agricole (French bank and sponsor of the stadium in Pau). Dynamically interacted with IT consultants, app developers, and senior project managers.

    Designed a mobile application prototype for French air force, using Axure software. Project bought by the army for 90,000 euros, thanks to a quick and detailed prototyping.

    Programmed a chatbot relying on Artificial Intelligence, for Harmonie Mutuelle (French health mutual). Built the foundations for a pioneering project expected to take at least 3 years.


    EasyPROG: Paris, France – Programmer Analyst (Jun 2016 – Jul 2016)

    EasyPROG is an SME founded in 2008, specialised in software and web design for companies. It employs 4 people and had a turnover of 1 million euros in 2018.

    Studied and reflected upon the day-to-day life of the CEO. Carried out a SWOT analysis to highlight strengths, weaknesses, opportunities and threats, which helped the company focus on new technologies to broaden its activities.

    Autonomously completed, within 4 weeks, an Android application based on Actionscript 3.0, enabling customers to edit unique risk assessment documents online or offline.



    Languages: Native French, fluent English, intermediate German and Japanese, elementary Chinese, studied Greek and Latin.

    IT Skills: Confident IT user. Experienced with Microsoft Word, Excel, PowerPoint.

    Knowledge of CATIA V5, ANSYS Mechanical, RobotStudio (ABB), MATLAB/Simulink, Python 3.3, SQL, C/C++, ROS (Rviz, Gazebo, Moveit!), OpenCV.

    Individual Interests: Member of the Badminton Committee. Keen guitarist, took part in “Emergenza” festival for amateur bands, and taught guitar lessons to young children in Japan (2 hours/week).

    Fablab Manager Assistant at Arts et Metiers Cluny (France), responsible of the Fablab development and its events. Helped increase its popularity in the region by 150% over two years by implementing creative activities dedicated to teenagers.

    Responsible of the organisation of activities for teenagers at the 2016 & 2017 Cartoon Festival (Cluny, France).

    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!


    2020 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert


    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at We will set up an account for you and invoice you. Note that you can also pay through PayPal.




    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.



    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)



    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.



    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing Accounts found not to be in compliance will be deleted.

    Terms & ConditionsCopyright ©2020 Spacelinks
    Web Analytics