Latest Space News
Sun, 16 Feb 2020 20:46:33 +0000
China has quietly rolled out a new Long March 7A rocket at a coastal launch site in preparation for launch of a ‘technology verification satellite’. SpaceNews.com
Sun, 16 Feb 2020 14:42:14 +0000
The Commerce Department is once again requesting a large budget increase for its Office of Space Commerce in order to work on space traffic management activities after Congress rejected a similar request last year. SpaceNews.com
Sat, 15 Feb 2020 22:00:44 +0000
A Cygnus cargo spacecraft launched Feb. 15 carrying more than three tons of supplies and experiments for the International Space Station. SpaceNews.com
Sat, 15 Feb 2020 14:20:10 +0000
NASA awarded a contract to Rocket Lab Feb. 14 for the launch of a cubesat mission that will serve as a precursor for the agency’s planned lunar Gateway. SpaceNews.com
Fri, 14 Feb 2020 22:55:11 +0000
As Astra prepares for its first orbital launch attempt, the company is setting expectations accordingly and taking the long view towards its goal of frequent, low-cost access to space. SpaceNews.com
Fri, 14 Feb 2020 19:30:37 +0000
DirecTV’s Spaceway-1 satellite has been retired to a graveyard orbit 500 kilometers above the geostationary arc, eliminating the risk of the malfunctioning satellite exploding in an orbit populated by active satellites.  SpaceNews.com
Fri, 14 Feb 2020 11:59:43 +0000
NASA is considering missions to Venus and two outer solar system moons as the next in its Discovery line of planetary science missions. SpaceNews.com
Fri, 14 Feb 2020 10:14:11 +0000
Virgin Galactic’s SpaceShipTwo suborbital spaceplane arrived at the company’s spaceport in New Mexico Feb. 13, ready for a final series of test flights before the company starts commercial operations. SpaceNews.com
Fri, 14 Feb 2020 08:57:18 +0000
The White House has added the Secretary of Energy and two other officials to the roster of members of the National Space Council. SpaceNews.com
Fri, 14 Feb 2020 01:26:41 +0000
Astranis said it would use the new money to finish its first satellite, a broadband “MicroGEO” satellite that will deliver internet to Alaska.  SpaceNews.com
Fri, 14 Feb 2020 00:10:38 +0000
Chief Master Sgt. Roger Towberman will serve as the first senior enlisted advisor of the U.S. Space Force. SpaceNews.com
Thu, 13 Feb 2020 23:55:37 +0000
NASA’s fiscal year 2021 budget request proposes cancelling an airborne observatory, a move that has surprised many astronomers but is also not the first time the project has faced termination. SpaceNews.com
Thu, 13 Feb 2020 23:31:20 +0000
Brig. Gen. D. Jason Cothern will replace Brig. Gen. Donna Shipton, as vice commander of the Space and Missile Systems Center SpaceNews.com
Thu, 13 Feb 2020 18:30:22 +0000
The U.S. Space Force is looking for ideas on names, ranks and names for operational units SpaceNews.com
Thu, 13 Feb 2020 15:47:07 +0000
Northrop Grumman won a $253.5 million payload development contract under the Protected Tactical Satellite Communications program. SpaceNews.com
Thu, 13 Feb 2020 13:00:57 +0000
Iceye, the Finnish radar satellite operator, opened a U.S. office in the San Francisco Bay Area led by Mark Matossian, who managed a series of aerospace programs at Google including the Earth-imaging venture Terra Bella. SpaceNews.com
Thu, 13 Feb 2020 12:13:18 +0000
The FAA’s commercial space office is seeking a modest budget increase in fiscal year 2021 as it also works on a reorganization and revision of commercial launch regulations. SpaceNews.com
Thu, 13 Feb 2020 01:07:56 +0000
Sigmatech will provide “architecture and integration support for Air Force space systems and programs." SpaceNews.com
Wed, 12 Feb 2020 23:35:02 +0000
National Guard officials said a Space National Guard should be established as soon as possible as a reserve component to the U.S. Space Force. SpaceNews.com
Wed, 12 Feb 2020 23:03:01 +0000
The Japan Aerospace Exploration Agency (JAXA) has selected Astroscale to send a spacecraft into orbit to inspect a discarded Japanese rocket upper stage, a step that would pave the way for a debris-removal  mission.  SpaceNews.com
More space news...
19613 cvs - 591 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: R&D Manager

    Printer Friendly


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:23-09-2019
     Last Modified:24-09-2019 (10:11)
    Job information
     Current job:R&D Manager
     Employment Term:Either
     Job location:Anywhere
     Date available:immediately
     Industry:Satellite Operators, , , Consulting/Engineering Services
     KeywordsAIT Engineer/Manager, Design, Procurement, Project Engineer/Manager, Technical Engineer/Manager
    CV

    Last Function / Position    R&D Manager at RENOVA srl

    Date of Birth: 24/04/1960  

    Marital Status: Married

    Children: 2 daughters (14 and 11 years old)

    Availability: immediate

    Relocation: without family          

     

    Profile Summary

    Master Degree in Mechanical Engineering; • Years of Professional Experience; Engineering Manager, Vice COO, Test Engineer 

    Short summary: 15 years as technician in a multi-brand car workshop; 29 years of experience in management of  highly professional Departments, Manager of Projects and Personnel (normal workers , technicians and engineers). Maximum budget managed 51 millions Euro. Motivated to do the best for the future as done in the past.

     

    Work Experience #9

    02/2019- 06/2019, Renova, Sesto San Giovanni,Milano, Italy

    (https://www.renovainnovations.com)

    < >Brakes, Clutches, Torque activated chucks, Pneumatic chucks, Roll ejector chucks 

    Responsibilities:

    < >R&D Manager, Project Engineer, Mechanical Process Engineer, Test Engineer, AIT Engineer

    Personal contribution to the team and the projects:

    Main projects: Duplex Pneumatic Ejector, Duplex Spring Ejector; Clutches new Project• Design, Manufacturing and Testing• Manufacturing Process Development • Design and Testing Documents, Re-design, re-design testing and Installation of consolidated products taking care of cost, market needs, reliability and maintainability. Design, testing and Installation of new products. Quality System Support, Commercial Support , Production Support.

     

    Work Experience #8

    04/2016- 12/2018, Leonardo Space Division, Nerviano,Milano, Italy

    (https://www.leonardocompany.com)

    Solar Array for Satellites 

    Responsibilities:

    Project Engineer, Solar Generator Engineer, Mechanical Process Engineer, Test Engineer, AIT Engineer

    Personal contribution to the team and the projects:

    Main projects: EXOMARS Rover, NGSAR, MPCV, JASON, PRISMA, SENTINEL3 C&D, COSMO 2nd GEN

    • Design and Testing of Solar Array

    • Manufacturing Process Development

    • Design & testing of Composites Materials

    • TAT Diode, TAT Cells, DVT Qualification and Testing, STM, EQM and Flight Model AIT, System Documents, Contractual Documents, Reliability Prediction Documents, Specification Documents, Management Documents, Test Plan & Procedure Documents, Preliminary  and Critical Design Review Documents and Meetings, Meetings with Customers and Suppliers, NRBs (Non conformances Review Board), TRR (Test Readiness Review Board) MRR (Manufacturing Review Board) IRR(Interface Readiness Review), TRB (Test Review Board) MRB (Manufacturing Review Board) DRB (Delivery Review Board), Marketing Support, Quality System Support, Production and Logistic Support.

     

    Work Experience #7

    08/2008- 04/2016, Duferdofin – Nucor srl, San Zeno Naviglio, Brescia, Italy

    (https://www.duferdofin-nucor.com)

    Steel Beams & Merchant Bars Production 

    Responsibilities:

    Vice  COO, Vice  Plant Manager, Project Manager, Mechanical & Machineries Maintenance Engineer, Plant Production Technologies Development, Lean Manufacturing Engineer, Investments Engineer, Procurement  Engineer, Tester of Industrial Plants or Machinery, Research & Development Manager, Writer of: Specifications, Acceptance  & Test Procedures, Contractual & Purchase Documents, Environmental and Safety issues, Interfaces with ARPA Lombardia (Regional Environmental Authority), Expediting Engineer, QA Engineer, Responsible of Certification Industrial Plants and Machinery in accordance with European Machinery Directive.

    Personal contribution to the team and the projects:

    Upgrade of Drop out Box and Cooling Duct of IV hole of a 100 tons EAF (Electric Arc Furnace)• Upgrade of Voest  Alpine Continuous Casting for blooms and billets,• Upgrade of exhaust gas/powder plant of primary and secondary powders discharge from EAF (Electric Arc Furnace) and LF(Ladle Furnace)with Dog House configuration. • Upgrade of Weighing system for Trucks and Trains.• Provisions to decrease the Acoustic Levels of the plant.• Danieli’s Merchant Bar Rolling Mill , Erection & Commissioning at Giammoro Plant (Sicily)• 2 Hi Profiles of Danieli Automation to measure the section dimensions of the laminated beams and merchant bars of the two rolling mills of Giammoro Plant.• New Canopy Fluid Dynamic Design and Procurement (Collector of exhaust gases during Electric Arc Furnace charge)• Design & Validation of an analytical model for Beam Blank Casting Production• HBI (Hot Briquetted Iron) Silos • Analysis & Evaluation of the Acoustical Impacts of the Plant on the surrounding Ambient• 3db Decrease of the acoustical noise of the chimneys • Optimization Electric Arc Furnace and Ladle Furnace energy consumption• Quenching Tower (improved functionality and optimization)• Cost Control, Investments Analysis & Control, Outsourcing.• 6 MW photovoltaic array for Giammoro plant• Active Carbon Dispenser for dioxins pollution reduction• Revamping of the Cooling Water Plant of the EAF (Electric Arc Furnace)• Revamping of  the filtering System for Steel Plant Exhaust Gases • Revamping of the Cooling Water Plant of Continuous Casters • Bag Filter for de-dusting of exhaust gases of  the furnaces EAF and LF • Metallurgical Vacuum Degasser erection and commissioning 

     

    Work Experience #6

    07/2007- 07/2008, Duferco Engineering SpA, Genova , Italy

    (https://www.dufercoeng.com)

    Main Contractor for Design, Project Management, Construction and Erection of Plants on Green and Brown Field, Revamping of Steel Production Plants.

    Responsibilities:

    Project Manager, Contractual Manager, Commissioning and Expediting Manager

    Personal contribution to the team and the projects:

    Procurement, Installation, Commissioning of:• 1 New Bendotti Heating Furnace for slabs,  • Various Cooling beds,• Various Roller ways, • 1 Descaling high pressure Pumps System, • Various Overhead Bridges with different functions, • 1 IMS thickness measurement of steel plates.• Cost Control, Resources Control, Outsourcing, Recruitment of staff, Interface with Universities

     

    Work Experience #5

    03/2007- 07/2007, RDS Costruzioni Meccaniche, Bareggio,  Milano , Italy

    (https://www.rdssrl.com)

    Design and Manufacturing of Ancillary Machineries for steel production plants

    Responsibilities:

    Head of R&D, Sales Manager, Contractual Manager and Lean Production Manager

    Personal contribution to the team and the projects:

    Management of Projects, • Lean Production, • Construction & Commissioning of 5 kick-off machine to remove billets from heating furnace; • Design, Construction & Commissioning of various Roller ways

     

    Work Experience #4

    12/2003-02/2007, Cimma Ing. Morandotti e C., Pavia ,Italy

    (https://cimma.it)

    Design and Manufacturing of Plants for grinding, micronization, milling  and distribution of various materials: Spices, Ceramics, Food, Chemicals, Coffee

    Responsibilities:

    Manager of Engineering, Project Manager, Director of R&D, Lean Production Manager

    Personal contribution to the team and the projects:

    Design and manufacturing of 4 new micronization machines, and the biggest mill for coffee at that time; • Design Manufacturing & Commissioning of Plants for mixing and dosing additives in chemicals, food industries, industries for ceramics; • Design of Experiments; • Cost Control, Marketing Support, Quality Support, Logistic Support

     

    Work Experience #3

    09/2001- 12/2003, Sagitta S.p.A. Vigevano, Italy

    (https://www.sagitta.it)

    Design and Manufacturing of Machines for footwear, leather goods and machinery for rubber, plastics and gaskets

    Responsibilities:

    Head of Engineering, Project Manager, Director of R&D, Lean Production Manager 

    Personal contribution to the team and the projects:

    Design and manufacturing of 6 new machines with the optimization of the spare parts; • Design of Experiments; • 7 patents presented at the European Patent Office; • Cost Control, Resources  Control, Outsourcing, Recruitment of staff, Marketing Support, Quality Support, Logistic Support, • Lean Production and Investments for Production.

     

    Work Experience #2

    07/1997- 08/2001, FIAR S.p.A. Space Division, now Leonardo Space S.p.A, Milano , Italy

    (https://www.leonardocompany.com)

    Design, Manufacturing of Electronic Equipment and Solar Array for Satellites

    Responsibilities:

    At the beginning Project Engineer of the HMMI, external console of the robotic arm for the International Space Station, Italian frame.

    • From july1999 to August 2001, Mechanical Engineering Manager  

    Personal contribution to the team and the projects:

    Mechanical Responsible of the following projects:

    ERA (European Robotic Arm) EVA (Extra Vehicular Activity) EMMI (Electronic Man/Machine Interface) console; • PCDU (Power Control & Distribution Unit) for ATV (Automated Transfer Vehicle); • PCDU for Prisma Project; • Photovoltaic Array for ATV project; • Photovoltaic Array for Rosetta project; • Photovoltaic Array of Rosetta Lander project; • Sac-C (satellite of Argentine Space Agency) Photovoltaic Array; • Precision Clock Hydrogen Maser. 

    Other activities:

    Plasmocer process coating (white oxidation of aluminum alloy) qualified in the frame of ERA EVA EMMI project for ESA programs,  • System Documents, Management Documents, Contractual Document, Preliminary (PDR) and Critical Design Review (CDR) Documents & Meetings, Meetings with Customers and Suppliers, NRB (Non-conformances Review Board), TRR(Test Readiness Review Board) MRR (Manufacturing Review Board) IRR(Interface Readiness Review), TRB (Test Review Board) MRB(Manufacturing Review Board) DRB (Delivery Review Board), interface with Marketing, Quality System Support, Production Support, Logistic Support• Management of personnel (mainly space engineers 6 and space technicians10)

     

    Work Experience #1

    10/1989 – 06/1997, FIAR SpA Avionic Division (now Leonardo Avionics), Milano, Italy

    Engineering Mechanical System Manager• Military Radars for Airborne and Helicopters

    (https://www.leonardocompany.com)

    Responsibilities:

    At the beginninganalyst of structural and thermal FEA (Finite Element Analysis) on EFA (European Fighter Aircraft) project.

    • From 1991 to 1997 Engineering Mechanical System Manager, Responsible for Thermal and Structural subjects for avionic military Radars (for: Northrop F5E/F for Singapore and Brazilian Air Force, Mirage IIIE, MIG 21and L59 Czech Republic).  

    Personal contribution to the team and the projects:

    Development, Design, Manufacturing, Ground Support Equipment & Test Set-up of all the structural and thermal parts of Radars .• Problems solved on the Radar Synthesizer, because the oscillators gave rise to an out of spec phase noise. The local oscillators had been mounted on an anti-vibrating frame linked with elastic rubber spring to the chassis of the Synthesizer. The elastic suspension was a tuned as a seismograph with the adequate mechanical natural frequencies to avoid any interference with the carrying frequencies of the synthesizer. • Solved mechanical interference between Radar antenna and Radome due to Gun Fire environment. • Gun Fire test arranged and carried out successfully. The global content of energy was 24 g’s  RMS. Engineering and Qualification test passed.

    • Design and Construction of a Test Set-up for Radar Temperature-Altitude test as per Mil-Std-810E. It was,at that time in the world, the only set-up fully compliant to the standard requirements

    • Structural validation by analysis and testing of the MDM’s antenna. MDM rejected any responsibility about the mechanical survival of the antenna when submitted to the Gun Fire Pulse Test. I took the responsibility of the structural capability, of its dimensioning, and calculations. Test confirmed the adequacy of the Antenna to the thermal and vibration environment

    • Procurement  Specification, Design Reviews e Acceptance of F-5 E/F Radome, at Brunswick Composites(USA) and Supervisor of the relevant test at Wyle Laboratories (USA)

    • Audit at Varian, ST Microwave and American Microwave after their components failed, during the preliminary engineering test  at the beginning of the project.

    • Hydraulic Dummy of the whole Radar to simulate its pressure losses vs the mass flow. This tool was used to validate the theoretical curves of hydraulic losses of the Electronic Units of the Radar. • Design, Assembly Procedure, User Manual, and Accuracy Calculation of an optical tool dedicated to the Radar-Aircraft Boresight Harmonization. The Installation of our Radar requested to cut the fuselage of the F5E/F aircraft. FIAR with Singapore Aerospace were responsible for the structural adequacy and alignment of the new bulkhead.

    • System Document, Contractual Document,Reliability Prediction, MTTR, MTBF, Preliminary  and Critical Design Review, Meetings with Customers and Suppliers, interface with Marketing, Quality System Support, Production Support and Logistic Support• Management of personnel (mainly engineers and technicians) 

     

    Work Experience #0

    09/1974 – 09/1989, Multi-brand authorized Workshop , Milano, Italy

    Automotive technician (part time)

    Garage Martinetti, via Martinetti 1, Milano

    Responsibilities:

    At the beginningas apprentice. • From 09/1974 to 09/1989 technician at an automotive shop to fix and set-up normal cars and racing cars: Rolls Royce, Jaguar, Bentley, Porsche, Ferrari, Formula 3, Alfa Romeo.

    List of Performed Test

    Pressure drop vs flow rate on Radar dummy to define the splitting of the flow rate inside the Electronic Units of the Radar. This dummy was used to validate the theoretical curves of hydraulic losses of the Electronic Units of the Radar (measure performed from 1991 till 1992).

    • Random Functional Vibration on Radar Synthesizer 5,4 g’s RMS (1991)

    • Random Functional 5,4 g’s RMS and Gun Fire Test (24g’s RMS) on MDM’s antenna full performance (1993).

    • Rain Test on Antenna, Gimbal and Servoloop fully operating (1994)

    • Radar Gun Fire test (Pulse Test) carried out successfully. The global content of energy was 24 g’s RMS. Engineering and Qualification test passed. (1hour each axis) (engineering and development test started on 1991and lasted on 1995) .

    Qualification Test on 1997. In 1995, Design and Construction of a Test Set-up for Radar Temperature-Altitude test as per Mil-Std-810E. It was, at that time in the world, the only set-up fully compliant to the standard requirements• (1997) full Qualification Test campaign with Temperature altitude test in the Vacuum Chamber with additional set-up to meet the flow of cooling air into the electronic Units.

     • Shock Test at 15 g’s, half sine shape 11 ms duration (1997) (preliminary engineering and development test performed from 1991 till 1996)• Radar Random Functional Test 5,4 g’s RMS (1997) • Radar Acoustical Noise (140 dB overall)

    (1997)• Acceptance of F-5 E/F Radome, manufactured by Brunswick Composites (USA) and under my supervision; test at Wyle Laboratories (USA) Shock Test 15 g’s (11 ms) three axes, Random Vibration Test  30 g’s each axis (1995)

    • EMI-EMC test on full Radar (1997)

    • Humidity Test (1997)

    • Salt dust test (1997)    

    (1999) Thermal Vacuum Test on ERA EVA EMMI console (ESA Project. Fokker Space Prime Contractor), • Engineering Random Test and Thermal Vacuum Test for

    (2000) PCDU (Power Control & Distribution Unit) for ATV• (1999) Shock and Vibration Photovoltaic Array of Rosetta Lander project

    • (1999) Sac-C(satellite of Argentine Space Agency) Photovoltaic Array , Deployment Test (at Nasa, Goddard Space Centre)

    • Engineering and Development Random Vibration, Shock , Thermal Vacuum Test for Precision Clock Hydrogen Maser (2000-2001).        

    Fatigue Test of various parts of machines (over 1 million of cycles under functional loads) (2001-2002)

    Granulometry test of powders (2003-2007)• Balancing of rotors (2003-2007)

    • Sine Vibration Test (2003-2007)

    Danieli’s Merchant Bar Rolling Mill , Erection, Commissioning & acceptance at Giammoro Plant (Sicily)

    • 2 Hi Profiles acceptance of Danieli Automation to measure the section dimensions of the laminated beams (2009)

    • Measure of the Acoustical Impacts of the Plant on the surrounding Ambient (2015)

    • Provisions for 3dB Decrease of the acoustical noise of the chimneys

    (2010) • Measure of Dioxines on Active Carbon Dispenser for dioxins pollution reduction

    (2008-2016) • Measure of Water Flow Rate and Pressure drop of Water Plant of the EAF and LF (Electric Arc Furnace – Laddle Furnace) 

    Exomars Rover Solar Array: Thermal Vacuum Test (at IABG 2018 Stamp Acquisition Software) full performance , • Exomars Rover DVT : Corona Test (at SpaceTech 2018), Dust Test (at University of Physics Aarhus Denmark) , (Insulation test, Continuity test on Diodes’ Lines and on Cells’ Lines).• Thermal Vacuum Test:  NGSAR solar Array at (IABG 2017) full performance, Stamp Acquisition Software. • Thermal Vacuum Test on MPCV solar array; Wing 1, 2, 4 (at Intespace Toulouse France) full performance; • TAT Diode , TAT Cells, DVT Qualification and Testing campaign on several projects, STM, EQM and Flight Model

    (2016-2018) • Reverse and Direct Current vs Voltage on silicon diodes and Cells

    (2016-2018) • Flasher Test• Equivalent Capacitance and Inductance of the Solar Array

     

    Education

    11/1979-07/1989, Politecnico di Milano – Italia

    https://www.polimi.it

    Master Degree in Mechanical Engineering, • Department: of Mechanical Systems Dynamic,• Specialty: Dynamic and Vibration of Machinery

    Thesis Title 1):“Experimental identification of the modal parameters of the foundations of rotating turbo-machinery by the measure of the rotor vibration””

    Thesis Title 2):“Experimental and analytical Validation of the parameters of bearings with hydrodynamic lubrication, that give rise to the Whip and Whirl Oil Instability”

     

    Publications:

    (Qualification Process) White oxidation of Aluminum Alloy for Space applications

    General Skills

    Contractual Documents, Statement of Work, Procurement Specification, • System Requirement Specification, • Commercial Offers Preparation, Economical & Financial Reporting, Earned Value Management, Project Management Plan, • Environmental Requirement Specification, Design Performance Analysis Report, Qualification Status List, Environmental Qualification Status Review, Verification Compliance Matrix, Test Plan & Procedure, Test Report, Non Conformance Review (NCR), Non conformances Review Board (NRB); • Design of Experiments,• Oscilloscope, Multimeter, Megaohmeter, Pico-amphermeter, Sound Level Meter usage, • Thermal – Vibration – Hydraulic Issues, Stress & Strain Measurement, Voltage-Current – Resistance- Capacitance – Inductance Measurement, • Accelerometers – Strain Gauges – Proximeters – Pressure sensors usage, • Acquisition System Usage, Sun Flasher Simulator Usage, Vacuum-Temperature Chamber Usage, Acoustical Noise • Measurement, • Finite Element Analyses, Thermal Calculus and Analyses (Conduction -Convection – Radiation), Shock and Vibration Calculus and Analyses, Modal Analyses, Stress and Strain Analyses,• CFD Simulation Mass Flow vs Pressure Drop Measure and Analysis, • EMI - EMC Design Provisions, Noise Reduction Design Provisions, • Pneumatic and Hydraulic Systems design and testing, • Lean Production, Six Sigma Procedure, Just in Time Production, KPI monitoring, Statistical analyses of production parameters;• Material and Processes applicable to: • Steel – Aluminum – Iron – Titanium- Ceramics – Rubbers – Plastics – Composites – Glasses, • Internal Combustion Engines Knowledge, Electrical Motors – Encoders & Resolvers usage, • Meetings with Customers and Suppliers (various subjects)

    Software Skills

    ERP-2, Word, Project, Excel, Power Point, SAP, Adobe

    Solidworks, Inventor, Catia V5, Nastran, Ansys, HyperWorks, CosmosM, Cosmos Works, ESATAN, IDEAS Supertab, Fortran 77, Matlab, Python (beginner)

    Knowledge of Languages

    English (fluent), French (basic), German (beginner), Italian (mother tongue)

    Personal Interest

    Swimming, Karting, playing guitar; Teaching English, French and Mathematics to daughters.

    References

    1) Giorgio Diana giorgio.diana(at)polimi.it Professor of Dynamics of Structures at Poilitecnico di Milano -

    2) • Federico Cheli federico.cheli(at)polimi.it Professor of Applied Mechanics at Politecnico di Milano

    • 3) Davide Piscioneri davide.piscioneri(at)spacetech-i.comTechnical Manager at SpaceTech

    • 4) Francesco Creatini f.creatini(at)airbus.nl Technical Manager at AIRBUS NL

    • 5) Diletta Falconieri dilefalconieri(at)gmail.com Product Manager at Alfa Laval

    • 6) Silvano Padovani Retired, Head of Radar Systems at Leonardo Company

    • 7) Michael Cohen dp18301(at)elbit.co.il Head of Project Managers at Elbit Systems Israel

    • 8) Tsvika Adir Manager, Environmental Engineering at Elbit Systems Israel

    • 9) Liano Mattioni Retired Head of Radio Frequencies Space Division at Leonardo Company

    • 10) Giovanni Carminati giovanni.carminati(at)leonardocompany.com Finance/Admin. Manager

    • 11) Giovanni Motto giovanni.motto(at)tin.it Consultant at Duferco Engineering (Genova Office).• Carlo Torti Manufacturing Manager at CIMMA Ing. Morandotti S.p.A.

    • 12) Andrea Iury a.iury(at)danieli.it Project Manager at Danieli S.p.A

    • 13) Carlo Toso ctoso(at)dca.it Sales Director at Danieli Automation

    • 14) Hazan Davide davide.hazan(at)leonardocompany.comHead of Project Managers

    • 14) Andrea Zamboni andrea.zamboni(at)leonardocompany.com Robotic Division Project Manager

    • 15) Gianfranco Santero santero1957(at)gmail.com Automation Freelance Consultant (Genova Office)

    16) • Steve Jackson sbjaxn(at)sbcglobal.net NUCOR Supervisor  at Duferdofin-Nucor (Brescia)

    17) • Antonio Caon Antonio.Caon(at)esa.int Head of Solar Generators Section at ESA/ESTEC

    • 18) Gianfelice D’Accolti Gianfelice.Daccolti(at)esa.int Solar Generator Engineer at ESA/ESTEC

    • 19) Céline Loiseau Solar Array Design Engineer at Thales Alenia Space Cannes

    • 20) Ronan Rodrigues ronan.rodrigues(at)leonardocompany.com Program Manager

    21) • Stefano Riva stefano.riva01(at)leonardocompany.com Engineering Manager of Solar Array Dept.

    • 22) Ton Van Der Vegt ton.vandervegt(at)odinconsult.com Engineering Manager at AIRBUS NL

    • 23) Marco Stanghini mstanghini.ext(at)cgspace.it Consultant of the Managing Director for Institutional Relations at OHB Italia

    • 24) Emanuele Ferrando emanuele.ferrando(at)spacetech-i.com Technical Manager at SpaceTech 

    Many times abroad for business;

    USA (at: Varian, St Microwave, Brunswick Composites, Wyle Laboratories, NASA, American Microwave), Singapore (at: Singapore Aerospace, Norpeth PTE), China (at: AVIC), France (at:Thomson Tubes, Sagem, Airbus Toulouse), The Netherlands (at: ESA), Switzerland (at: Physics Laboratory of Neuchatel), Germany (at: IABG, SpaceTech, IMS Messsysteme, PTS Jena, LAP Laser), Belgium (at: Duferco Plants), Czech Republic (at: IMF), Spain (at: Sener), Denmark (at : Aarhus University of Physics)

    Advanced & Specific Courses

    (1) Cost Analysis and Project Management (Athena).

    (2) Theory and Analysis of Decisions (Athena).

    (3) Methodologies of Presentations (Athena).

    (4) Value Analyses and its Management (Alenia).

    (5) English Language Course (Alenia).

    (6) Engineering Design (General Purpose Course) (Assomac)),

    (7) English Language Course (Duferdofin –NUCOR srl) ;

    (8) PES-PEV Certification (Italian certification for operation with high Voltage Complex Systems)

    Desired Salary and Benefits

    Salary to be agreed, Benefits to be agreed. 

    Security Clearance

    From 1989 to 1997 I had the Security Clearance that in Italy is Called NOS( Nulla Osta alla Segretezza)• When I passed to the Space Division of FIAR, NOS was not needed anymore because the space projects were not military projects• Before the military service in 1986, I passed the selection to be employed in the Police Department of Milan. At that time instead of the traditional army service it was possible to ask to be selected for the Police Department and to work there for one year. The Police Department took too much time to accomplish the selection and to call me, so I had to do the military service in the army. After its conclusion the Police Department of Milan, when the selection was concluded, called me but I had almost finished university, so I decided to reject the employment in the Police of Milan.  

    Privacy Statement

    Data above listed shall be treated in accordance with the privacy law valid and applicable into the state where this CV is addressed to; (European Rule UE n. 679/2016).           

     

    Cover Letter

    To whom it may concern

    I was born in mechanical environment; my father was the owner of a small company. At 12 years old, I repaired the Norton gearbox of the lathe. During the high school and university periods. I worked, part time, at a multi brand work shop on normal and racing car as technician. I was proficient in playing soccer in high level teams till 1979.

    I have a manual ability in mechanical and electronic equipment usage. I have a good written and spoken English capability and proficiency with personal computers and software. I have a very good problem solving capabilities and ability to work in group, open minded, pro-active, flexible and familiar with complex multinational contexts.

    The knowledge of different processes applicable to a variety of materials: steel alloys, Irons, rubbers, plastics, aluminum alloys, titanium alloys, advanced ceramics, structural adhesives, composites do allow me to purchase, design and manufacture various products for various applications.

    I can direct, coordinate and exercise functional authority for investments, design, purchase, manufacturing, maintenance, planning, budget control, operating plans, organization, control, quality policy integration, sales issues within area of assigned responsibility by performing the duties personally or through subordinates.

    I always have had contacts with customers, suppliers, technical groups, universities in order to develop cutting edge products and keeps abreast of latest technical developments. I’m capable of leading  contractual meetings, design reviews, board meetings, non- conformances meetings. Many time I have been charged of strategic decisions.

    I’m familiar with a lot of different standards such as PED, Atex, Machinery Directive (CE Applicable), ASTM,  FDA, ASHRAE, CUNA, NFPA, API, ASME, NACE, ANSI, ISO, DIN, AGMA, MIL, UNI, NASA, ESA

    I graduated in Mechanical  Engineering at Politecnico of Milan. The courses I attended provided me with a sound theoretical knowledge of Mechanical, Thermal, Electrical Engineering.

    I have been till 31st December 2018 responsible of the Electrical design testing and integration of solar array for space application.

    I managed several team in the development and as support to purchase, manufacturing, quality and testing of the electrical/mechanical sub-system/ machines/ plants dedicated to Steel Making, Space, Avionic and Environmental Control.

    What am I looking for?  I’m looking for a job that allows me to be proficient, and at the same time, to live a quiet life without the occupational precariousness that I’m experiencing in this period of my life in Italy. I did many different jobs and I reached also high level of leadership. (maximum value managed 51 millions of €; commissioning of 1 rolling mill for a value of 89 millions of €)

    I am a proactive person and I make use of a methodological approach while working. I am able to adapt to changing circumstances and I am quick to pick up new competencies and enthusiastic in learn from others, and give my knowledge to others. I believe that be emphatic and built solid relationship with teammate ensure successful project outcomes.

    I am inspired by the passion for mechatronic systems for space, aerospace, medical devices, automotive, heavy machines, steel making machines and for other various industrial products.

    I’m also inspired by the challenge that comes from working in fields where the technological limits are constantly leading the minds of the persons. This position could provide me the way to express my analytical and communications skills in its exciting international environments.

    I’m passionate about swimming, karting  and plying guitar and for the remaining free time, I pass it teaching English , French, German and Mathematics to daughters.

    My motto is: “the happiness of your life depends on the quality of your thoughts” (Marco Aurelio)

    I’m ready to relocate without family

    My linkedIn address is: https://www.linkedin.com/in/pietro-cervi-313696150/

    Oh Yes, it is undeniable, I’m 59, and I don’t know if all the things I wrote in my CV and in this cover letter will convince you about my adequacy to the request you are doing; but it is my intention to work for other 20 years at high level; I keep my body fit, (I swim 2 Km minimum every afternoon). 

    Thank you for the time you used to read this letter.

    I look forward to hearing from you soon.

    Yours faithfully


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2020 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2020 Spacelinks
    Web Analytics