Latest Space News
Sun, 16 Feb 2020 20:46:33 +0000
China has quietly rolled out a new Long March 7A rocket at a coastal launch site in preparation for launch of a ‘technology verification satellite’.
Sun, 16 Feb 2020 14:42:14 +0000
The Commerce Department is once again requesting a large budget increase for its Office of Space Commerce in order to work on space traffic management activities after Congress rejected a similar request last year.
Sat, 15 Feb 2020 22:00:44 +0000
A Cygnus cargo spacecraft launched Feb. 15 carrying more than three tons of supplies and experiments for the International Space Station.
Sat, 15 Feb 2020 14:20:10 +0000
NASA awarded a contract to Rocket Lab Feb. 14 for the launch of a cubesat mission that will serve as a precursor for the agency’s planned lunar Gateway.
Fri, 14 Feb 2020 22:55:11 +0000
As Astra prepares for its first orbital launch attempt, the company is setting expectations accordingly and taking the long view towards its goal of frequent, low-cost access to space.
Fri, 14 Feb 2020 19:30:37 +0000
DirecTV’s Spaceway-1 satellite has been retired to a graveyard orbit 500 kilometers above the geostationary arc, eliminating the risk of the malfunctioning satellite exploding in an orbit populated by active satellites.
Fri, 14 Feb 2020 11:59:43 +0000
NASA is considering missions to Venus and two outer solar system moons as the next in its Discovery line of planetary science missions.
Fri, 14 Feb 2020 10:14:11 +0000
Virgin Galactic’s SpaceShipTwo suborbital spaceplane arrived at the company’s spaceport in New Mexico Feb. 13, ready for a final series of test flights before the company starts commercial operations.
Fri, 14 Feb 2020 08:57:18 +0000
The White House has added the Secretary of Energy and two other officials to the roster of members of the National Space Council.
Fri, 14 Feb 2020 01:26:41 +0000
Astranis said it would use the new money to finish its first satellite, a broadband “MicroGEO” satellite that will deliver internet to Alaska.
Fri, 14 Feb 2020 00:10:38 +0000
Chief Master Sgt. Roger Towberman will serve as the first senior enlisted advisor of the U.S. Space Force.
Thu, 13 Feb 2020 23:55:37 +0000
NASA’s fiscal year 2021 budget request proposes cancelling an airborne observatory, a move that has surprised many astronomers but is also not the first time the project has faced termination.
Thu, 13 Feb 2020 23:31:20 +0000
Brig. Gen. D. Jason Cothern will replace Brig. Gen. Donna Shipton, as vice commander of the Space and Missile Systems Center
Thu, 13 Feb 2020 18:30:22 +0000
The U.S. Space Force is looking for ideas on names, ranks and names for operational units
Thu, 13 Feb 2020 15:47:07 +0000
Northrop Grumman won a $253.5 million payload development contract under the Protected Tactical Satellite Communications program.
Thu, 13 Feb 2020 13:00:57 +0000
Iceye, the Finnish radar satellite operator, opened a U.S. office in the San Francisco Bay Area led by Mark Matossian, who managed a series of aerospace programs at Google including the Earth-imaging venture Terra Bella.
Thu, 13 Feb 2020 12:13:18 +0000
The FAA’s commercial space office is seeking a modest budget increase in fiscal year 2021 as it also works on a reorganization and revision of commercial launch regulations.
Thu, 13 Feb 2020 01:07:56 +0000
Sigmatech will provide “architecture and integration support for Air Force space systems and programs."
Wed, 12 Feb 2020 23:35:02 +0000
National Guard officials said a Space National Guard should be established as soon as possible as a reserve component to the U.S. Space Force.
Wed, 12 Feb 2020 23:03:01 +0000
The Japan Aerospace Exploration Agency (JAXA) has selected Astroscale to send a spacecraft into orbit to inspect a discarded Japanese rocket upper stage, a step that would pave the way for a debris-removal  mission.
More space news...
19613 cvs - 591 jobs


  • HOME

  • HOME
  • CV: Scientist/Engineer-SE

    Printer Friendly

    << BACK

    Personal information
    Contact information
    Candidate Profile
     Date Submitted:10-10-2019
     Last Modified:17-10-2019 (07:25)
    Job information
     Current job:Scientist/Engineer-SE
     Employment Term:Permanent
     Job location:Anywhere
     Date available:within 2 months
     Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, Launch Systems, Business Services, Consulting/Engineering Services, Space Tourism
     KeywordsPropulsion systems design engineer, satellite project manager, Launch vehicle propulsion systems design engineer, chemical propulsion engineer, cryogenic and green propulsion technologiest,mechanical design engineer, mission analysis, Propulsion system c
    CV (2014-16): IIT, Kharagpur

    10+ Years Experienced Professional (Space & Defence)

    I am an in Aerospace Engineering  and B.Tech. in Mechanical Engineering with 10+ years of experience in both Satellite and Launch Vehicle System Design & Development Engineering, CAD/CAM, Fabrication, DFM, FMECA  ,Project Management & facilitation, generating customer centric solutions, Industry research & Growth Strategy.



    Product Design & Development                     Communication: NASA, ESA, ROSCOSMOS, HAL, NAL,ADA Etc.

    Budget Management                                      Resource Management & Personnel Administration                       

    Project Management& Facilitation                Manufacturing, Assembly & Testing

    Facility Establishment                                     Reverse engineering, 3D printing & additive manufacturing(R&D) 

    Individual & Team Contributor                       Technology transfer, Technical Training  & Concurrent Engineering

    Cost Estimation & e-procurement                  TQM(Quality control & assurance, ISO audit)



    CATIA Ver-5, CNC programming  and MASTER CAM ,AutoCAD.

    MSC Nastran/ Patran ,Ansys Fluent

    MS- project & EXCEL,FORTRAN  , Easy plot, VDISP






    Percentage  in  Aerospace Engineering

    Indian Institute of Technology, (IIT) Kharagpur


    8.18/10 CGPA

    B.Tech. (Mechanical Engineering)

    Berhampur University, Odisha


    78%,3rd Rank

    Diploma (Production Management)

    NILEM, Chennai



    Diploma (Mechanical Engineering)

    SCTE & VT, Odisha


    76 %

    Class X

    BSE, Odisha


    79 %




    Jan 2019  Onwards: Lead System Design Engineer & Project Manager, Human Space Flight Project,  ISRO

    Research and analysis of project requirements of propulsion system for crew module and service module for de boosting, re-entry and AOCS application. Prepared system requirement Doc for Crew Cabin Pressure control System(CPCS) as part of  Environmental Control and Life Support System and contribution in Preliminary system Design. Generation of  testing facility requirement technical document and  estimated its establishment cost  for class clean rooms, oxygen compatible test lab, component pre assembly lab, etc. Leading and mentoring of 10 multi-disciplinary team members. Project activities planning on daily basis ,Follow up the schedules, execution and Budget Management. Decision Making based on various requirements, quality control and system integration. Acting Project Manager for orbital vehicle propulsion system & Crew cabin pressure control system.


    Feb 2010-Dec-2018: Lead System Design Engineer and Project Manager, Liquid Propulsion System, ISRO

    Communication Satellite Projects: INSAT Series, GISAT series, , GSAT series, IRNSS series,

    Remote Sensing Satellite Projects: Cartosat Series, Resource sat Series, Ocean sat, Micro sat ,INS( Nano-satellites), HYSIS, Scat Sat, EMI sat.

    Scientific Missions: Mars orbiter Mission,Chandrayaan-2, Venus Mission(New)

    Technical Demonstration Program: Re-usable launch Vehicle, CARE mission, SRE mission


    Research and analysis of project requirements, viz. Space Mission, Space Propulsion, Controls, Launcher, Thermal, Power, Structure, MGSEs Etc. System Engineering ,Configuration study  and  accommodation assessment, BDR, PDR & CDR. Design & Development of product ( Thrust Chamber, C-D Nozzle, Pressure vessel design using MIL-1522-C and ASME std. , Flow control components such as filters, valves, fittings such as  Brackets, Plumb lines, ferrules, etc) with classical hand calculation by selecting suitable material, manufacturing feasibility   using DFM technique.

    3-D modeling, FE structural analysis (MODAL, FRF, Stress & strain, Fatigue Life Calculation ) and Fluid analysis( Pressure drop, Flow coefficients, etc), generation  of  engineering drawings for fabrication with fits & tolerance.

    Selection , Cost Estimation and Procurement of raw material (Forgings, Rods, Plates, Billets, Tubes, etc)as per aerospace standards ( Titanium alloy, SS alloy, Aluminum alloy and Non metals such as Teflon, Neoprene rubber, etc).Fabrication feasibility study( Machining methodology, EB/TIG welding parameter spec, surface finish req. etc),Preparation of Bill of Material and Free issue of material (FIM & BOM) for fabrication, Realisation of product  through in-house fabrication facility/external vendor.

    Assembly of components , Prepare test plan doc., specify instrumentation requirements ,conduct structural & functional testing , Compilation of test results, Presentation to Test Review committee and Salvage committee  and deliver  accepted products  to projects. Project activities planning & execution and Budget Management, manage timeline and schedules. Prepare and manage milestones on daily basis for all the ongoing and new projects.

    Inventory management, Jigs & Fixture design and realisation, Welder qualification, NDT( EDAX & SEM of material, CMM, UT, Eddy current test, FP & X-ray test).Conversant on  different aerospace standards (  ECSS,MIL,NASA,JSC,ARP, Federal  ,DIN, EN,AISI ,ASTM , ASME,GOST,SAE,AS).Divisional ISO coordinator and trained ISO auditor. Procurement of Lab. instruments  and prepare manpower requirement/assessment report.

    Leading and mentoring of multi-disciplinary team size of 15.


    2007-2010: System Engineer, Liquid Propulsion System center, Trivandrum

    Polar Satellite Launch Vehicle and Geosynchronous Satellite Launch Vehicle MK-II & MK-III Project

    Design, Development and Realisation of propulsion system elements viz. metallic & nonmetallic fluid circuit elements (Coiled Tube type Heat Exchanger, metal and non metal pipes, orifices, brackets, clamps, nut & bolt etc) to work under  critical cryogenic environment for  indigenously developed cryogenic upper stage for GSLV Mk-II & Mk-III launch vehicle projects.

    Development and Realisation of Propellant Acquisition Systems for Polar Satellite Launch Vehicle

    Configuration , subsystem accommodation and subsequent engineering drawings generation for LOX and LH2 fluid circuits.

    Fluid analysis viz. pressure drop calculation, flow rate analysis in fluid lines, heat exchanger thermal analysis and preparation of system level Integration drawings, hardware fabrication, test plan doc. preparation, conduct hot test, compilation of test data and post test performance analysis, presentation to various forums and obtain clearance for flight usage.

    Mass Properties Management and development of Mechanical Ground Support Equipment.

    Launcher interface studies and spacecraft envelope control.

    Establishment of Facility  & Technical Training  at Liquid Propulsion Systems Center

    Key Member of technology transfer team for establishing of USD 400 million aerospace components assembly & testing facility at LPSC, Bangalore ( SPS CATF-GOCO project) to meet the augmented satellite launches. First ( GOCO )Govt. Owned Corporate Operated Project  in  ISRO. Project member of Establishment of USD 3.5 Billion integrated titanium tank production facility at the outskirt of Bangalore and USD 50 Million Aerospace components production, assembly & testing facility at M/s MTAR, Hyderabad. An Experienced Technical Trainer and imparted Structured training to industry personnel on satellite propulsion system components assembly & testing.. Member of RFP/EOI committee & Project Cost Estimation committee. External Vendor development/Evaluation. Indent  Cost estimation , Indenting , Evaluation & E-Procurement.


    Innovation Programs at Liquid Propulsion Systems Center 2007-2018

    Reusable Launch Vehicle (RLV) Project: Designed & developed positive expulsion propellant tank with EPDM bladder for  high ‘g’ propulsion system for India’s indigenous RLV-TD project. Mars Orbiter Mission & Moon Mission-2: Member of propulsion team for India’s maiden successful Mars Orbiter Mission (MOM) project and contributed for design & development of propulsion system elements. Propulsion team Member for India’s 2nd lunar orbiter, Lander & rover mission project .Green Propulsion System: Member of young engineer’s team to design & develop HAN based green propulsion system for space craft application. Implementation of Lean methods for optimizing Integration processes.


    Previous Work Experience

    Defense Research and Development Organization (DRDO), June-2005 to August-2007:Technical Services.

    Sree Metaliks ( Captive  Thermal Power Plant Operation Engineer)  October-2004 to May-2005


    Professional Training

    Four months comprehensive training along with live project on rocket Science , spacecraft propulsion & satellite communication system at ISRO training school, Vikram Sarabhai Space Center (VSSC), ISRO.

    Computational fluid dynamics & heat Transfer on ANSYS software at IIT, Bhubaneswar.

    Computational fluid dynamics with project by using ANSYS software at M.S Ramaiah School for advance studies, Bangalore.

    CNC program & MASTER CAM at CTTC with project work (Central tool room & training center), Govt. Of India. CATIA V5 at CIPET (Central institute of plastic engineering & technology) Govt. Of India. AutoCAD at BOSE, Cuttack Odisha.

    Vibration & Flutters at IIT, Kharagpur.

    Residential training program on ‘Manufacturing of space systems’ at LPSC, Trivandrum.

    Several training programs and workshops on Team building, Project management and personality development.



    Key member of the 'Gaganyaan' Project Team (India’s maiden human space flight project) constituted by Chairman, ISRO.

    Received Outstanding Rating consecutively for 11 years (2008-2018) at ISRO.

    Published six conference papers:

    "Flow analysis of HAN based Mono Propellant Thrusters for Space Applications”, National Seminar on Advances in Aerospace Sciences and Technologies October 27 — 28, 2018, 32nd NATIONAL CONVENTION OF AEROSPACE ENGINEERS, Birla Institute of Technology(BIT), Ranchi, Mesra, India

    "Design And Analysis Of Combustion Chamber For Han Based Mono Propulsion System Thruster For Spacecraft Application", International Conference on New Frontiers in Engineering, Science, Law, Management, Humanities and Social Science 2019, INFES2019, Gauhati University, India, 23-24 Feb2019,INFES2019.

    "Conceptual Study Of Electro Chemical Propulsion For Space Application", International Conference on New Frontiers in Engineering, Science, Law, Management, Humanities and Social Science 2019, INFES2019, Gauhati University, India, 23-24 Feb2019 ,INFES2019

    "Dynamic Analysis Of A Component Mounted On PCB Due To Launch Environment”, International conference on Smart Systems & Structures (ICSSS-2016), IEEE, Madras Chapter, March-2016 (IEEE conference best paper award)

    "Fatigue Life Estimation of Components Mounted on PCB Due To Vibration”, International conference on Fatigue, Durability and Fracture Mechanics, September -2016 (Springer publication, Singapore, Proceedings of fatigue, Durability and Fracture mechanics pp 369-379, online ISBN 978-981-10-6002-1)

    "Finite Element Vibration Analysis of Printed Circuit Boards and Experimental Evaluation of Board Strains”, International Conference on Composite Materials and Structures- ICCMS 2017, IIT Hyderabad, December 2017



    Received 1st Prize in Essay writing, Debate and General Knowledge competitions at school.

    A keen sports person, painting, planting & gardening, take weekend classes for unprivileged children.

    STEM speaker and visit academic institutions for technical speeches on advances in space technologies.

    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!


    2020 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert


    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at We will set up an account for you and invoice you. Note that you can also pay through PayPal.




    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.



    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)



    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.



    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing Accounts found not to be in compliance will be deleted.

    Terms & ConditionsCopyright ©2020 Spacelinks
    Web Analytics