Latest Space News
Sat, 16 Oct 2021 11:46:23 +0000
An Atlas 5 successfully launched a NASA spacecraft Oct. 16 on a mission to study distant asteroids that may hold clues to the early history of the solar system. SpaceNews
Fri, 15 Oct 2021 18:18:57 +0000
As commercial human spaceflight enjoys a breakout 2021, it doesn't make sense for Congress to keep safety regulators handcuffed through 2023, argues the author of "Bringing Columbia Home." SpaceNews
Fri, 15 Oct 2021 17:37:11 +0000
Boeing’s CST-100 Starliner was within hours of launch on its second uncrewed test flight in early August when stuck valves in the spacecraft’s propulsion system forced a launch scrub that has turned into a delay that will extend well into next year. SpaceNews
Fri, 15 Oct 2021 16:56:11 +0000
A second crew of three astronauts are heading for China’s Tianhe space station module after the successful launch of the Shenzhou-13 mission Friday. SpaceNews
Fri, 15 Oct 2021 02:34:16 +0000
Virgin Galactic will postpone a SpaceShipTwo suborbital spaceflight that had been scheduled for this month, electing to instead immediately begin an extended maintenance period for the spaceplane and its carrier aircraft that will further delay the start of commercial flights. SpaceNews
Thu, 14 Oct 2021 23:48:44 +0000
Air Force Secretary Frank Kendall is asking Congress to authorize a new assistant secretary for space acquisitions before the Oct. 1, 2022, date that was set in the 2020 National Defense Authorization Act. SpaceNews
Thu, 14 Oct 2021 22:06:22 +0000
An agreement just announced between the U.S. Space Force and a venture capital firm is a pilot project intended to help government buyers understand how investors assess space industry startups. SpaceNews
Thu, 14 Oct 2021 21:23:04 +0000
Rocket Lab’s acquisition of an aerospace software company is one of a series of deals it is considering, enabled in part by going public. SpaceNews
Thu, 14 Oct 2021 19:07:07 +0000
Iceye won a contract to provide data from its constellation of small synthetic-aperture radar satellites to Copernicus, the European Union program aimed at providing continuous, global Earth observation. SpaceNews
Thu, 14 Oct 2021 18:02:39 +0000
OneWeb has contacted all 36 satellites launched from Russia’s Vostochny Cosmodrome Oct. 14, enlarging the broadband constellation beyond its halfway mark toward full deployment next year. SpaceNews
Thu, 14 Oct 2021 17:40:28 +0000
Orbit Fab, a venture-funded startup offering a refueling service in space, has signed a technology sharing agreement with the U.S. Air Force Research Laboratory. SpaceNews
Thu, 14 Oct 2021 13:02:51 +0000
China carried out its 37th orbital launch of the year Thursday, successfully sending the Chinese H-alpha Solar Explorer and 10 other satellites into orbit. SpaceNews
Thu, 14 Oct 2021 13:00:06 +0000
Italian ground segment provider Leaf Space announced plans Oct. 14 to add five ground stations to its global Leaf Line Network. SpaceNews
Thu, 14 Oct 2021 12:00:25 +0000
Space Perspective, a company developing a stratospheric ballooning system intended to give people views like those from space, has raised $40 million to fund the company through the start of commercial operations. SpaceNews
Thu, 14 Oct 2021 00:35:39 +0000
SpaceLink has awarded OHB System AG a contract with an anticipated value of more than $300 million to manufacture four satellites for its commercial space data relay constellation. SpaceNews
Wed, 13 Oct 2021 22:06:06 +0000
The launch of a NASA cubesat mission that will test the orbit to be used by the lunar Gateway has slipped to next March, the result of broader launch delays Rocket Lab has suffered because of the pandemic. SpaceNews
Wed, 13 Oct 2021 21:06:11 +0000
Maj. Gen. Ed Thomas, commander of the Air Force Recruiting Service, said the Space Force met its goal last year of recruiting nearly 400 guardians. Next year the target has been raised to 500. SpaceNews
Wed, 13 Oct 2021 17:23:21 +0000
Embedded Ventures, a venture capital firm investing in space startups, has signed a multi-year agreement with the U.S. Space Force. SpaceNews
Wed, 13 Oct 2021 15:11:22 +0000
Blue Origin launched Star Trek actor William Shatner and three others into space on a brief suborbital flight Oct. 13, the second crewed flight of the company’s New Shepard vehicle. SpaceNews
Wed, 13 Oct 2021 11:13:35 +0000
Chinese private launch Deep Blue Aerospace completed a 100-meter level launch and landing test with its Nebula M1 VTVL test stage Wednesday. SpaceNews
More space news...
20480 cvs - 725 jobs

LOOKING FOR A JOB?

  • HOME
  • POST YOUR CV
  • JOB SEARCH
  • LOOKING FOR STAFF?

  • HOME
  • REGISTER
  • CV SEARCH
  • POST JOBS
  • CV: Mechanical Engineer

    Printer Friendly

     


    << BACK

    Personal information
     Name:<withheld>
     Age:<withheld>
     Country:<withheld>
     Location:<withheld>
    Contact information
     Email:<withheld>
     Phone:<withheld>
     Mobile:<withheld>
    Candidate Profile
     Date Submitted:05-08-2021
     Last Modified:05-08-2021 (05:02)
    Job information
     Current job:Mechanical Engineer
     Employment Term:Permanent
     Job location:US only
     Date available:immediately
     Industry:Launch Systems
     Keywordsmechanical, design, structural, CAD, NX
    CV

    Engineering Professional

    Ambitious, resourceful professional with 6 years of engineering, design, and leadership experience. Effective as part of a team and as an independent contributor, thriving even under pressure in deadline-driven settings that call for adaptability. Able to adapt quickly to new project processes, using strong attention to detail to work on complex mechanical systems. Determined with a strong work ethic. Skilled at working on new original designs as well as supporting existing designs in production. Now seeking a contracting role that will allow for continued progression and growth. Willing to relocate or work remotely for the right opportunity.

    Areas of Expertise

    Engineering Operations, Design, CAD, PDM, Drafting, BOMs, Aerospace Hardware Selection, Production Support, Tolerance Analysis, Structural Analysis, Root-Cause Analysis, Microsoft Office (Word/Excel/PowerPoint/Outlook/Paint), Leadership, Cross-Functional Teamwork, Strong Work Ethic, Communication, Problem Solving, Time Management, Organization.

     

    Career History

    Northrop Grumman Launch Vehicles (Aerotek Contractor) | Engineer Mechanical, DI&T (II)           2020 – 2021

    In this most recent contract position, obtained a Secret Security Clearance and was given extreme ownership over the design of a new module for development as part of the T4 Program

    Autonomously designed a module for the T4 SRBM (Short-Range Ballistic Missile) vehicle as Responsible Engineer, with a focus on design for manufacturability (DFx)

    Contributed to design for Ground Support Equipment and the MRBM (Medium-Range Ballistic Missile) vehicle

    Collaborated with Integration & Test, Guidance/Navigation/Control, Mass Properties, Dynamics, Structural Analysis, Propulsion, Parts/Materials/Processes, and Electrical Engineers to finalize a design conducive to all applicable requirements

    Oversaw 3D modeling and design using NX12 (CAD) and Teamcenter (PDM)

    Produced drawings according to DPD (Digital Product Definition) and Northrop GD&T drafting requirements

    Created Bills Of Materials (BOMs) using Costpoint

    Performed high fidelity cable routing design and installation provisions in CAD

    Engaged in hardware selection conforming to company requirements using IHS and Costpoint

     

    MD Helicopters Inc. | Mechanical Engineer, Design & Integration (I / II)               2015 – 2020

    Conceptualized, designed and offered production support for sheet metal, machined, and composite structures

    Facilitated designs to allow for peak strength, manufacturability, cost control, corrosion protection and reliability

    Adhered to modeling and drafting rules and techniques specific to MDHI procedures

    Mastered company procedures for change requests and applicable authority for EOs

    Demonstrated competency in Siemens NX8.5 / NX11 (CAD) and Matrix One (PDM)

    Resolved various engineering issues using the company helpdesk system

    Performed stress analysis of new design, including shear, bearing and tear-out calculations

    Calculated weight and balance for new systems, suggesting locating design to keep the CG in the approved envelope

    Led tolerance stack-up analysis for new and existing designs

    Gained experience with GD&T per ASME Y14.5 1982 Standard

    Collaborated with Production Team to determine the root cause of issues and mitigate the number of NCRs (Non-Conformance Reports) per aircraft; yielded time and money savings in the process

    Learned and Utilized FAA Part 27 regulations; acted as a Certification Engineer to determine major or minor changes, approving minor drawing changes to structures on behalf of the FAA

    Appointed as a part-time checker for new designs and drawing revisions

    Educated new hires on company design, CAD, drafting and configuration management best practices

    Contributed actively to team design and individual projects

     

    Education

    Bachelor of Science, Mechanical Engineering, Mathematics Minor, University of Arizona, 2015


    Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

    All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

    All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

    Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

     

    2021 Pricing Structure (excluding VAT):

    1 month - Discovery 450 euros convert
    3 months - Bronze 1150 euros convert
    6 months - Silver 1950 euros convert
    12 months - Gold 3200 euros convert

     

    If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.

     

    Subscriptions

     

    Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

     

    VAT:

    Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
    - if your business is located outside the EU, VAT does not apply to you
    - if your business is located in France, you will be charged a 20% VAT
    - if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
    - if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

     

    Support:

    For sales enquiries and general information, you can call us on +33(0)622757477.
    Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

    Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

     

    Warning:

    We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

    To ensure you are approved, please include the following on your application:
    * The website address of your Company. Under construction websites will be rejected.
    * Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

    Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

     
    Terms & ConditionsCopyright ©2021 Spacelinks
    Web Analytics