Electronics Engineer with years of directly acquired professional experience and growth that couples sound analysis and solid technical expertise with proven ability to prioritize, manage and conclude a wide range of individual assignments in electronics engineering. Extensive engineering background includes multichip module design, circuit design, SMPS, packaging, PCB, testing, system integration, designing, building, engineering-modeling and documenting, maintaining, modifying, researching and developing equipment, circuits and devices used in RF, microwave, aerospace, military, space, etc. Extensive software application background includes but not limited to Orcad, Cadence PSD, PSpice, MS Office (including MS Access, MS Excel, MS Powerpoint, MS Project), Mathcad, etc. Extensive requirements background includes but not limited to ISO 9001:2008, SAE AS9100 Rev. B, MIL-HDBK-217, MIL-PRF-38534, MIL-PRF-38535, MIL-PRF-55310, MIL-STD-202, MIL-STD-750, MIL-STD-883, MIL-STD-1547, and much more. Areas of particular knowledge and capability include_
Designing, building, engineering-modeling and documenting synthesizer, RF and microwave assemblies; utilizing knowledge of leading-edge technologies and circuitry techniques involving chip configuration, wire bonding, die mounting, printed circuit board design, stepped-impedance matching, distributed-element matching, lumped-element matching, phase-noise measurement, thermal-scan verification, etc. to fulfill project specified parameters and designated subsystem requirements.
Writing/implementing test plans and procedures; assessing circuitry performance in terms of bandwidth, noise, power, gain, efficiency, and ruggedness constraints; interfacing with associate engineers, planners, technicians, equipment suppliers and technical representatives to prepare for and conduct project transfer to and for manufacturing.
Designing, maintaining, modifying, researching and developing equipment and devices used in synthesizers, RF, RADAR, CATV, broadcast video, aerospace, military, space, etc.
C, Pascal and Assembly programming languages; Microsoft Office applications, MS Word (Word Processing), MS Excel (Spreadsheet), MS Project, AutoCAD (Computer-Aided Drafting), OrCAD (Schematic capture and Printed Circuit Board Design), MathCAD (Analysis and Design), MATLAB and Simulink (Analysis and Contol Systems Simulation), PSPICE (Circuit Analysis), Altium Designer (Circuit Analysis) and many more application software packages.
Technically experienced hands-on problem solver with superior skill at relating complex technical information to non-technical personnel in a simple easy-to-understand manner.
"A Graphical Method to Design Low-Noise Amplifiers That Have Low Input VSWR" presented to the Institute of Electrical and Electronic Engineers, Southern Area Region 6 Conference, May 1989.
Active full-member of IEEE Ultrasonics, Ferroelectrics and Frequency Control Society
Active full-member of IEEE Components Packaging and Manufacturing Technology Society
Active full-member of IEEE Microwave Theory and Techniques Society
Active and lifetime member of the United States Judo Federation, ranked Nidan (Second Degree Black Belt)
Active Secret Clearance
Bachelor of Science, Electrical Engineering, California State Polytechnic University, CA, (June 1989)
Work Experience (Since November 1983)
ManTech SRS Technologies (aka SRS) (Feb 2007-Nov 2012)
Worked through ManTech SRS Technologies, Incorporated (aka SRS) to provide engineering support in fulfillment of the NASA Jet Propulsion Laboratory and California Institute of Technology Reliability Engineering Support Services (RESS) contract. Directly supported JPL’s 5131 Product and Circuit Reliability Engineering Group on the Mars Science Laboratory (MSL) project, Soil Moisture Active Passive (SMAP) project, Juno project and others. Performed reliability assessments, circuit modeling, EPSA, WCA, and Single Events/Effects Analysis. Provided MSL, SMAP and JUNO Mission Assurance Managers (MAMs), CogEs and PEMs analysis, thorough reports and detailed recommendations. Performed/reviewed reliability analyses; assessed performance with respect to requirements; evaluated failure reporting, analyses, and corrective action implementations; establishes reliability models and utilized said models for systems and subsystems analysis, and used computer aided engineering tools. Supported design teams and recommended design changes that had significant positive impact for the MSL, SMAP and Juno projects. Demonstrated ability to leverage years of design experience to the MSL, SMAP and Juno projects by recommending necessary design changes that mitigated reliability issues identified through circuit modeling and reliability analyses. Performed reliability analysis on several of the MSL Terminal Descent Sensor (TDS) modules, modeled all device permutations of the circuits using PSpice and determined under certain conditions CMOS devices were improperly biased resulting in certain failure. Also, identified that disconnection of a mating connector (during ground operations) would create an overvoltage condition by collapsing an inductor’s field. Worked with the CogEs and MAM to make sure the recommended design changes were implemented thus assuring mission success where potential mission failure was a near certainty. See Mantech.com.
Hybrid-Microcircuits (May 2006-Feb 2007)
Title: Sole Proprietor
Operated an engineering consulting servicewhich provided analysis support for military/commercial RF and microwave hybrid assemblies (bothactive and passive). See Hybrid-Microcircuits.com.
bd Systems, Incorporated (Jan. 2004-May 2006)
Worked through bd Systems, Incorporated to provide engineering support to the USAF on the SER project/contract at the Space, Missile Systems Center, located at the Los Angeles Air Force Base. The specific task being performed is related to space quality parts, materials and processes as utilized for satellites and expendable launch vehicles during which improvements to MIL-STD-202, MIL-STD-750, MIL-STD-883, and MIL-STD-1547 were generated and are now invoked by DSCC, JEDEC and the US Air Force as an Aerospace TOR. Recognized expertise in digital, analog, and RF design and analysis as recommendations were implemented project wide. Additionally, performed WCA, PSA, Single Events/Upset Analyses. (no website available)
Q-Tech, Corp. (Apr. 1993-Nov. 2002)
Title: Senior Design Engineer
Design Engineer / Project Engineer of MIL-Spec hybrid-microcircuit crystal controlled oscillators certified/qualified to ISO-9001:2008, MIL-PRF-38534, and MIL-PRF-55310; screened to MIL-STD-883. See Q-Tech.com.
M/A Com, PHI (Nov. 1985-Dec. 1992)
Title: Applications Engineer
Designed and project managed MIL-Spec/commercial hybrid microwave power transistors and circuits application development qualified/screened to MIL-PRF-38535, MIL-STD-202, and MIL-STD-750. See MAComTech.com.
Columbia Pictures (Nov. 1983-Oct. 1985)
Title: Broadcast Video Technician/Engineer
Provided technical support to Columbia Pictures’ Armed Forces Radio and Television Services (AFRTS) contract. (no website available)
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs.
2022 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at email@example.com. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing firstname.lastname@example.org. Accounts found not to be in compliance will be deleted.