CV: Stress Engineer


<< BACK

Personal information
 Name:<withheld>
 Age:<withheld>
 Country:<withheld>
 Location:<withheld>
Contact information
 Email:<withheld>
 Phone:<withheld>
 Mobile:<withheld>
Candidate Profile
 Date Submitted:10-01-2015
 Last Modified:11-01-2015 (09:31)
Job information
 Current job:Stress Engineer
 Employment Term:Either
 Job location:Anywhere
 Date available:immediately
 Industry:Civil Agencies/International Organizations, Satellite Manufacturers and Subcontractors, Satellite Operators, Launch Systems, Consulting/Engineering Services
 KeywordsFEM CAD STRESS STRUCTURES MATERIALS
CV

Work experience

 

Dates (from – to)

From June 1st 2013 to August 31st 2014

 

Name and address

of employer

Bertrandt Ingenieurbüro GmbHwww.bertrandt.com

Blohmstrasse 10, Hamburg,  GERMANY

 

Position – Contract type

Stress Engineer – Permanent Contract

 

Main activities and responsibilities

 

 

 

 

 

 

 

Main activities and responsibilities

From December 1st 2013 stress engineer in the frame of SIEMENS SylWin Alpha project (converter offshore platform for transferring of offshore wind energy).

Carrying out of FE linear static analysis to assess the material strength, the deformation behaviour and the buckling modes of the six platform’s legs.

Creation and validation of DFEMs (Detailed Finite Element Model) to extract the stresses in the cut outs surround.

Hand calculation of the overstressed regions.

Structural reports redaction.

Software : Nastran, HyperMesh, HyperView, Strand7, MS Office

From June 1st 2013 to November 30th 2013 stress engineer in the frame of AIRBUS A350-900 XWB project.

Carrying out of FE linear and non-linear static analysis to assess the material strength (both metallic and composite materials), the deformation behaviour and the buckling modes of the CARGO and PAX door surround primary structure (aft fuselage, section 16/18).

Creation and validation of LFEMs (Local Finite Element Model).

Joint analysis (bearing, pull through, etc.).

Hand calculation of the overstressed components.

Structural reports redaction.

Software: Nastran, Patran, HyperMesh, Isami, MS Office

 

 

 

Dates (from – to)

From May 21th 2012 to May 31th 2013

Name and address

of employer

Alten TechnologyGmbHwww.alten-technology.com

Fangdieckstraße 66, Hamburg, GERMANY

Position – Contract type

Mechanical Designer – Permanent Contract

Place of work

AIRBUS facility in Finkenwerder, Hamburg, GERMANY

Main activities and responsibilities

Mechanical designer in the frame of AIRBUS A350-900 XWB project.

Perform, via 3D models and DMU, the design review of the flight test equipment (sensors, probes, strain gauges, tail bumper etc.) installed on board the A350 central and aft fuselage (section 15/21 and 16/18).

Discuss the result of the reviews with the AIRBUS designers and DTR to find with them suitable solutions to make the flight test equipment complies with the different guidelines and principles applicable to the design process.

Follow und supervise the test equipment installation directly on the manufacturing facility.

 

Software: CatiaV5 ,Trend V4,PDM_Link, AIRBUS databases, MS Office

 

 

Dates (from – to)

From November 28th 2011 to April 11th 2012

Name and address

of employer

Highftech Engineering SRLwww.highftech.com

Via Fucà 145, Modena, ITALY

Position – Contract type

Stress Engineer- Mechanical Designer - Fixed-term contract

Main activities and responsibilities

During my period within the company I have been involved in the following projects:

THALES Alenia SIT: Mechanical design of an automated trolley so called MGSE (Mechanical Ground Support Equipment) designed to move and enable the manufacturing process of the SPACEBUS 4000 satellites. FE linear static analysis to assess its material strength and deformation behaviour.

Transport containers for the ISS (International Space Station): FE modal analysis of containers for the transport of aerospace material.

AGBMB (Automatic Gauge Blocks Measurement Bench): Maintenance and repairing of an automatic bench, equipped with a DENSO robotic arm, designed to calibrate Johnson gauge blocks.

Software: Nastran, Patran, Catia V4, MS Office

 

 

Dates (from – to)

 From November 9th 2011 to November 25th 2011

Name and address

of employer

Technische Universität DarmstadtDepartment of  Technical Thermodynamics   Petersenstraße 30, Darmstadt, GERMANY

Position – Contract type

Stress Engineer- Fixed-term contract

Place of work

Mérignac Airport  (Bordeaux), FRANCE

Main activities and responsibilities

Responsible for the structural integrity of an experimental equipment for the study of flow boiling phenomena under micro-gravity conditionsduring the 55th ESA Parabolic Flight Campaign. I also took part in the parabolic flight as operator for adjustment of experimental parameters. The experiment was designed during my internship at T.U.D. (see  Education and training).

 

 

Dates (from – to)

From September 2003 to September 2010

• Name and address

of employer

Service station  IP

  Via Jacopo Carrucci 234,  Empoli , ITALY

• Contract type

  Part-time

• Main activities and responsibilities

  Petrol pump attendant ,changing tires and minor maintenance (oil changes, lights etc.).

 

 

Education and training

 

• Dates (from – to)

From  October 2008 to October 2011

• Institute

Università degli Studi di Pisa ( Pisa University) - Engineering Faculty

• Qualification awarded

Master Degree in Mechanical Engineering. (Specialization in Structural Analysis )

• Thesis title

Design of an experimental setup for the study of flow boiling in parabolic flight

• Final grade

103/110

 

 

• Dates (from – to)

 From March 1st 2011 to August  31st 2011

• Institute

Technische Universität Darmstadt- Department of  Technical Thermodynamics

Position – Contract type

Internship (Master Degree Thesis)

Main activities and responsibilities

Mechanical design and structural verification of an experimental setup for the study of flow boiling phenomena within mini-channels under micro-gravity conditions. The experiments ran on board of the A300 ZERO-G from November 14th to 25th 2011 during the 55th ESA Parabolic Flight Campaign. My tasks were:

Design the different components of the experimental loop, follow their manufacturing process and assemble them.

FE linear static analysis to assess the material strength and the deformation behaviourof an aluminium rack designed to place the experiment on board the A300 during the tests under micro-gravity conditions.

Software: Ansys, ProEngineer Wildfire 2.0, UGS NX 7.5, MS Office

 

 

• Dates (from – to)

From October 2003 to October 2008

• Institute

Università degli Studi di Pisa ( Pisa University)Engineering  Faculty

• Qualification awarded

Bachelor Degree in Mechanical Engineering

• Thesis title

  Experimental analysis of outflow factors of a rotary valve for steam expander

 

 

• Dates (from – to)

Da settembre 1996 a luglio 2001

• Institute

Liceo classico -  “ Virgilio “, Empoli (Italy)

• Main field of study

Foreign languages (English, German, French and Latin)

• Qualification awarded

Diploma  (High School Leaving Certificate)

 

Language skills

 

•Mother tongue

 Italian

 

 

• Other languages

LANGUAGE

Reading skills

Writing skills

Verbal skills

English

Very good (C1)

Very good (C1)

Fluent (C1)

German

Good (B2)

Good (B2)

Good  (B2)

French

Basic (B1)

Basic  (B1)

Basic  (B1)

 

 

 From October 2014 to Januar2015 enrolled in an intensivebusiness German course.

 

Technical skills

 

• General I.T. knowledge

Excellent  knowledge of Windows operating systems with Office packet (Word, Excel, Outlook, etc.). Basic knowledge of programming language Python and Perl.

 

 

• FEM software

FEM

Patran

Nastran

HyperMesh

HyperView

Ansys

Knowledge

Advanced

Advanced

Advanced

Advanced

Good

Experience [years]

>3

>3

>2

>2

>2

 

 

 

 

 

 

 

• CAD  software

CAD

Catia V5

ProEngineer

SolidWorks

UGS NX 7.5

 

Knowledge

Good

Good

Good

Basic

 

Experience [years]

> 2

>2

>2

<1

 

 

 

• Digital calculus software

CALCULUS

Matlab

Mathcad

 

 

 

Knowledge

Good

Good

 

 

 

Experience [years]

>2

>2

 

 

 

 

 

• Technical knowledge

Good knowledge of metallic (steel, aluminium and titanium) and composite (CFRP) materials both from the structural point of view and of their manufacturing.

 

Other skills

 

 

I have always loved playing sports regularly. For several years I played with the Empoli Rugby Team.

 

I have an emergency first aid worker’s advanced level qualification because I worked regularly as a volunteer on ambulances of the local medical service from 2002 to 2007.



Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

 

2020 Pricing Structure (excluding VAT):

1 month - Discovery 450 euros convert
3 months - Bronze 1150 euros convert
6 months - Silver 1950 euros convert
12 months - Gold 3200 euros convert

 

If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

 

Subscriptions

 

Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

 

VAT:

Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

 

Support:

For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

 

Warning:

We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

 
Terms & ConditionsCopyright ©2020 Spacelinks
Web Analytics