RF Design and Test Engineer working for AceAxis (Essex, UK) in the Radio Systems Group since 2010.
My most recent work has involved the development of Remote Radio Head (RRH) products for LTE and WiMax systems.
I have carried out design verification testing of radio receivers and transmitters, extended life testing and design of RF and IF filter stages.
The software tools I am most familiar with are Mentor Pads for schematic capture and layout, Agilent ADS for RF simulation, hp Vee and Labview for running system tests.
Previously employed at NortelNetworks in the Wireless Technology Department, where my role began as a Technician and progressed to an RF Engineer.
Test and verification of Radio Systems.
RF design of amplifier and filter stages.
Experience in Agilent ADS for RF design and Pads for schematic capture and layout.
2010-Present, AceAxis- RF Design and Verification Engineer in the Wireless Systems Group.
Verification testing of RRH units, RF sections, DC supply, extended life testing, system tests. RF Filter design with ADS, automated testing using Labview software.
4G Antenna Array for cost reduction project, involving track layout with ADS for 9-element antenna array, micro-strip air-gap solution, including power splitters and phase delay sections.
2003-2010, NortelNetworks- RF Engineer in the product design team for Radio Development in the Carrier Networks Division.
Transmit PA sections for LTE Radios, 900 to 2600MHz. Driver section design, impedance matching and testing. Transceiver levels planning, adaptation from 700MHz system to higher frequency bands.
Tower Top LNA development for improved coverage of communication systems, 2.3 and 2.6GHz. Design of LNA protection circuits, gain compensation and system testing. Use of ADS for RF design and HPVee software for laboratory testing.
Design of 1.5GHz LNA for WiMax radio receiver stage, matching networks and PIN diode protection section. ADS used for RF design.
Bias-T Lightning protection and filter for tower top LNA system at 1800MHz. BPF network design for datacomm link and surge protection.
1996-2003, Nortel Networks- Technician Engineer in the Wireless Technology Labs (WTL).
Development of Frequency Translators at 1800 and 1900MHz for uplink and downlink conversion in UMTS trials, LO and VCO design.
Design and development of RF coupler circuits and PIN diode attenuators for UMTS radio system, simulations and PCB layout with Jomega RF design tools.
Design of power detection circuit for gain control of power amplifier.
Test and development of RF front end receivers at 6 and 11GHz bands, LNA and mixer stage measurements.
Studied for BEng (Hon’s) in Electrical and Electronic Engineering, awarded in 1996.
Design and development of radio transceivers and PA stages in the 700 to 2700MHz bands.
Project utilising the mains distribution network for Internet access, involving the development of 240V interface units, RF Repeaters, integration trials and verification measurements.
1977-1996, Nortel Networks– Research Technician in the Wireless Technology Labs (WTL).
Initially employed as a Research Assistant to build and test communication systems.
Hardware development for a range of RF systems as a Technician, antenna measurements for base stations, CT2 development for handsets and target simulators for radar systems.
1996 B.Eng. (Hon’s) Electrical and Electronic Engineering (2:1), University of Hertfordshire, Hatfield, Herts.
1993 MIET (Member of Institution of Engineering and Technology)
1989 BTEC (HNC) in Electronic Engineering, Harlow Technical College, Harlow, Essex.
1980 TEC (ONC) in Electronics, Harlow Technical College, Harlow, Essex.
1977 City and Guilds, Radio and Electronics Part A (Credit), NGCT, Cheltenham, Glos.
1976 Certificate of Secondary Education (Grade 1 in 7 subjects), Naunton Park Secondary School, Cheltenham, Glos.
Born in Cheltenham, UK.
Full driving licence.
Interests: Member of local triathlon and running clubs, level 1 triathlon coach, committee member of running club.
References available on request.
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Silver subscription will give you unlimited jobs posting and unlimited CV database access for one year at just €325 per month!
2022 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
|6 months - Silver||1950 euros||convert|
If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at firstname.lastname@example.org. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing email@example.com. Accounts found not to be in compliance will be deleted.