CV: Technical Consultant


<< BACK

Personal information
 Name:<withheld>
 Age:<withheld>
 Country:<withheld>
 Location:<withheld>
Contact information
 Email:<withheld>
 Phone:<withheld>
 Mobile:<withheld>
Candidate Profile
 Date Submitted:04-04-2014
 Last Modified:06-04-2014 (05:14)
Job information
 Current job:Technical Consultant
 Employment Term:Permanent
 Job location:Anywhere
 Date available:immediately
 Industry:Consulting/Engineering Services
 KeywordsRF engineer in the field of satellite transmitters and FGU. EMC and Avionic Responsible for ISS Module payloads
CV

Personal information

 

Nationality

 

Italian

Date of birth

 

 04, 07, 1971

 

Work experience

 

From 01/10/2007

 

 

Name and address of the work employer

 

ALTRAN ITALIA SPA, Rome, Via Tiburtina 1132

• Work detail

 

Salary after taxation in Euro per month

 

 

Consultant Electronic Engineer  (current employment)

 

1800

 

 

 

•   MainTasks

 

Consultant Electronic Engineer in the field of electronic apparatus for micro and millimeters wave frequency applications.

Electronic Design of electronic apparatus and devices for micro and millimeters wave frequency applications: Synthesized frequency generation Units in the X and K band frequency range, Low noise amplifier chains, reconfigurable down and up converters etc..

Antenna design.

Electric Engineer for ISS Nodes Class I Payloads (EMC Responsible, Avionic Responsible).

Main Work Customers: Thales Alenia Space Rome (RF Designer, RF Technical Responsible for Satellite Units), Rheinmetall Italiy (RF Designer)

Thales Alenia Space Turin (Current Customer, Avionic and Electric engineer. International Space Station Class I Node Payloads)

• From 01/10/2008

 

 

• Name and address of the work Employer

 

RISI ALESSANDRO S.R.L., Rome, Via Riace 62

• Work detail

 

Electronic and Electric Designer partner   

 

 

 

•  MainTasks

 

Technical Responsible, Design of Electrical Systems in low and mediom voltage ranges for Houses, commercial activities and for special Events. Design of Solar Energy Generation Systems.

 

•  From 07/07/2005 al 30/09/2007

 

 

Name and address of the work

  Employer

 

CNR Institute For Micro Electronic and Micro Systems, Rome Research Area  Rome 2-Tor Vergata, Via Fosso del Cavaliere 100, 00133 Rome

Work details

 

 

 Researcher

 

 

 

MainTasks

 

1) Hardware designer and Electrical test responsible of Microwave True Time Delay Lines and Phase Shifters realized by using MEMS Switches. Activity carried out together with international partners (VT Finland, Selex Integrated Systems Italy)

 

2) Electrical test responsible of Microwave aerospace Devices like MEMS Switches or Switch Matrices relevant to the  “Microwave Electrostatic Micro-Machined Devices for on board applications” ESA Contract in collaboration with Thales Alenia Space S.P.A. , Perugia University (Italy), Bruno Kessler Foundation (Italy)

3)Design and electrical test of transmission lines and package test jigs for the electrical transitions of RF/Microwave devices in microstrip and coplanar technology. Sylicon Wafer level electrical characterization in collaboration withST Microelectronics.

4) Support activity during Degree Thesis developed by Electronic Engineer Students

 

5) Design and Development of Photo Lithographic Masks for electronic devices fabrication.

 

6) Data package Report Activity and partecipation to Milestone Meetings. (Helsinky, Roma, Trento, Perugia).

 

7) Partecipation to international conferences and presentation of scientific papers published on international proceedings.

 

8) Design and  test on electronic devices like:

  1. Membrane
  2. EMBG ( Electro magnetic Band gap)
  3. micro machined Substrate (trenched lines etc.)

Most significant papers:

            (INTERNATIONAL PAPERS, CHAPTERS ON BOOKS OR SPECIAL ISSUES)

 Simone Catoni,Romolo Marcelliand Giancarlo Bartolucci: “Design of IF Band-Pass Filters based on Micro-machined Resonators”, Romanian Journal of Information Science and Technology, Vol.7, No.3-4, pp.317-334, Publishing House of the Romanian Academy (2004).

 

Romolo Marcelli,Gianluca Minucci, Simone Catoni, Benno Margesin, Flavio Giacomozzi, Giovanni Mannocchi, Francesco Vitulli: “Reliability of RF-MEMS Series Switches under Low and Medium Power Cycling”, in Advanced MEMS for RF and Millimeter Wave Communications, Editors A. Müller, A. Rydberg, and R. Plana, Romanian Academy Publisher, Series in Micro and Nanoengineering, No. 7, pp.159-168(2005).

 

Giancarlo Bartolucci, Romolo Marcelli, Simone Catoni, Benno Margesin, Flavio Giacomozzi: “AN EQUIVALENT CIRCUITAL MODEL FOR SHUNT CONNECTED COPLANAR RF MEMS SWITCHES”, submitted to Electronics Lett. On March 6, 2006. Still under review on June 07, 2006.

      (ARTICLES PUBLISHED ON PROCEEDINGS OF INTERNATIONAL CONFERENCES)

 

Romolo Marcelli,Gianluca Minucci, Simone Catoni, Benno Margesin, Flavio Giacomozzi, Giovanni Mannocchi, Francesco Vitulli: “Reliability of RF-MEMS Series Switches under Low and Medium Power Cycling”, Proceedings of the 5th MEMSWAVE Workshop, MEMS for Millimeter Wave Communications, Angstroem Laboratoriet, Uppsala, Sweden, 30th June – 2nd July 2004, pp.F10-F13 (2004).

 

Simone Catoni, Romolo Marcelli, Giancarlo Bartolucci: “Design of Band-Pass Micromachined Filters based on fixed-fixed Beam Resonators”, Proceedings of International Semiconductor Conference (CAS 2004), Sinaia, Romania, 4-6 October 2004, pp.509-512.

 

Giancarlo Bartolucci, Romolo Marcelli, Gianluca Minucci, Simone Catoni, Benno Margesin and Flavio Giacomozzi: “Design of Phase Shifters based on RF MEMS Shunt Switches”, CAS 2005, Proceedings of the INTERNATIONAL SEMICONDUCTOR CONFERENCE, 28th Edition, October 3-5, 2005, Sinaia, Romania, Vol. 1, pp.103-106 (2005).

 

Romolo Marcelli, Simone Catoni, Luciano Frenguelli:LOW LOSS COPLANAR LINES ON LOW RESISTIVITY SILICON BY SU-8 THICK NEGATIVE PHOTORESIST”, CAS 2005, Proceedings of the INTERNATIONAL SEMICONDUCTOR CONFERENCE, 28th Edition, October 3-5, 2005, Sinaia, Romania, pp.107-110 (2005).

 

Simone Catoni, Sergio Di Nardo, Paola Farinelli, Flavio Giacomozzi, Giovanni Mannocchi, Romolo Marcelli, Benno Margesin, Paolo Mezzanotte, Viviana Mulloni, Roberto Sorrentino, Francesco Vitulli, Larissa Vietzorreck: “Reliability and Power Handling Issues in Ohmic Series and Shunt Capacitive RF MEMS Switches,submitted to MEMSWAVE 2006, Orvieto, June 27-29, 2006. Accepted.

 

Andrea Ferrari, Simone Catoni, Romolo Marcelli, and Giancarlo Bartolucci: “Analog and Digital RF MEMS Variable Capacitors”, submitted to MEMSWAVE 2006, Orvieto, June 27-29, 2006. Accepted.

 

Massimiliano Dispenza1), Roberta Buttiglione1), Anna Maria Fiorello1),Jarkko Tuominen2), Kari Kautio2), Jyrki Ollila2), Pentti Korhonen2), Manu Lahdes2), Kari Rönkä2), Simone Catoni3), Daniele Pochesci3), Romolo Marcelli3), Vittorio Foglietti4), Elena Cianci4), Andrea Coppa4):”Fabrication of high performances RF  MEMS Structures on Surface Planarised Planarised LTCC Substrates” ,  IMAPS Nordic EMPC Conference OULU (Finland ), June 17-21, 2007.

From 21/01/2005 To 21/03/2005

 

 

Name and address of the work

  Employer

 

Electronic Engineer Department of the Engineer Division of the University of “Tor Vergata” , Rome, Via del Politecnico 1, 00133

Work details

 

 

Temporary job

MainTasks

 

Electromagnetic and circuital simulation of Delay lines realized by using MEMS Devices.

From 21/09/2004 to 23/12/2004

 

 

Name and address of the work

  Employer

 

 Electronic Engineer Department of the Engineer Division of the University of “Tor Vergata” , Rome, Via del Politecnico 1, 00133

Work details

 

Temporary job

MainTasks

 

Software development relevant to the remote control of RF/Microwave electronic measure instrumentation

From 01/01/2004 to 01/07/2004

 

 

Name and address of the work

  Employer

 

CNR Institute For Micro Electronic and Micro Systems, Rome Research Area  Rome 2-Tor Vergata, Via Fosso del Cavaliere 100, 00133 Rome

Work details

 

Temporary job

MainTasks

 

Software development relevant to the remote control of RF/Microwave electronic measure instrumentation Relevant to the High Frequency Electronic laboratory managed by Doctor Romolo Marcelli.  The activity was carried out in clean room facility and was relevant to the characterization of high frequency electronic aerospace devices. The related devices was characterized in terms of reliability, linear and high power behavior.

Development of circuital models and simulation of micro-electro-mechanical switches.

 

From 23/11/2003 To 23/12/2003

 

 

Name and address of the work

  Employer

 

Electronic Engineer Department of the Engineer Division of the University of “Tor Vergata” , Rome, Via del Politecnico 1, 00133

Work details

 

Temporary job

MainTasks

 

Theoretical basis development on micro machined and MEMS Narrow Band electrical filters.

 

From 01/01/1993 to 01/01/1997

 

 

Name and address of the work

  Employer

 

4 years of student career interruption.

Italian military service(1993) and various temporary jobs

Work details

 

TV Antenna installation, employment in the field of commercial activity of software and pc hardware products

 

 

Education

 

• 03/06/2004

 

 

• Name and typology of education institution

 

University of “Tor Vergata” , Rome, Via del Politecnico 1, 00133

• Examination

 

Italian qualifying examination achieved in order to develop the Engineer professional career.

• From 01/10/1991 to 28/10/2001

 

 

• Name and typology of education institution

 

University of “Tor Vergata” , Rome, Via del Politecnico 1, 00133

• Education title

 

Electronic Engineer Master Degree  91  / 100

• Main characteristics of education training

 

Microwave Integrated Circuits

• Degree Thesis Title

• Job Description

 

“Design and Simulation of RF MEMS Resonator Narrow band Filters”

Design of narrow band filters for HF frequency range application. The design was achieved by using as starting design brick the model of a single MEMS very high quality factor resonator. The Thesis training was developed at the  CNR Institute For Micro Electronic and Micro Systems, Rome Research Area  Rome 2-Tor Vergata, Via Fosso del Cavaliere 100, 00133 Rome

Thesis responsibles:

prof. G. Bartolucci – Microwave integrated circuits associated professor at the Electronic Engineer Department of the Engineer Division of the University of “Tor Vergata” , Rome, Via del Politecnico 1, 00133

dott.  R. Marcelli, - First Researcher and Institute Responsible at CNR Institute For Micro Electronic and Micro Systems, Rome Research Area  Rome 2-Tor Vergata, Via Fosso del Cavaliere 100, 00133 Rome

• From 1986 To 1991

 

 

• Name and typology of education institution

 

ITIS G. Marconi. Via Ciro Corradetti 2 Civitavecchia, 00053 Rome

• Education title

 

High schools award of industrial electronic Technical responsible 48/60

• Main characteristics of education training

 

Analogic Elecrtonic for video amplifier Systems. Digital Electronic. Electronic Control Systems.

 

Personal skills

.

 

Native language

Other Languages

 

Italian

English

 

read

 

good

written

 

good

spoken

 

good

 

Technical skills

 

 

 

 

 

 

 

Driving Licence

 

AVAILABILITY

TREATMENT OF PERSONAL DATA

 

Excellent skills in the human relationships always required especially when larger teams are involved during a job experience. Fluent use of the English language.
Extensive experience in the Field of prototypes design of electronic naked die devices for use in millimeter and microwave frequencies range application.
Extensive experience in technical coordination activities in the context of photo -lithography processes for prototyping electronic devices for on wafers applications in microwave and millimeter frequencies ranges.
Good knowledge of Autocad software for 2D and 3D drawing models.
Advanced knowledge of the most used software applications for Windows ( Office Suite , Corel D , Access, etc.) which are currently used in the data package reporting.
Good knowledge in programming languages ​​and mathematical tools such as C + + , Turbo Pascal , Visual Basic , Matlab , Matcad , Origin.
Advanced knowledge of the Agilent VEE for the remote control of measurement equipment.
Advanced knowledge of CAD simulation circuits , electromagnetic and FEM software based, such as: Capture Spice , AWR Microwave Office , Agilent ADS ,Ansys HFSS 3D simulator, ANSYS Designer, Ansys E -Physics , CST Microwave Studio , Comsol Multiphisics .

Advanced knowledge in the field of the on and off-wafer measurements of microwave devices.
(Using the Network Analyzer 8510 for frequencies up to 50 GHz and semi-automatic probe station in clean room facilities, design of SOLT and TRL calibration kit for on and off  wafer application, remote data acquisition software developed by using Agilent VEE),
Advanced knowledge in the field of RF measurements: Power Supply, Oscilloscopes, Signal Generators, Network Analyzer, Noise figures meeters, Spectrum Analyzer. . etc.

B

15 days

 

I declare that the informations contained in this Curriculum Vitae are true and accurate. I Authorize the processing of my personal data, including sensitive ones, in accordance with the italian Law 196/2003.


Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.

All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.

All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide. 

Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Gold subscription will give you unlimited jobs posting and unlimited CV database access for one year at just over €250 per month!

 

2020 Pricing Structure (excluding VAT):

1 month - Discovery 450 euros convert
3 months - Bronze 1150 euros convert
6 months - Silver 1950 euros convert
12 months - Gold 3200 euros convert

 

If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at sales@space-careers.com. We will set up an account for you and invoice you. Note that you can also pay through PayPal.

 

Subscriptions

 

Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.

 

VAT:

Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)

 

Support:

For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.

Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.

 

Warning:

We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.

To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.

Individual exceptions can be made on a case by case basis by emailing sales@space-careers.com. Accounts found not to be in compliance will be deleted.

 
Terms & ConditionsCopyright ©2020 Spacelinks
Web Analytics