California Institute of Technology (Caltech), Pasadena, California 2009 - 2014
Ph.D. in Aeronautics, June 2014 2010 - 2014
· GPA: 3.8/4.0
· Thesis title: High-strain composites and dual-matrix composite structures
M.S. in Aeronautics, June 2010 2009 - 2010
· GPA: 4.0/4.0
· Research project at NASA – Jet Propulsion Laboratory: designed, manufactured and tested a Langmuir probe for a mass spectrometer on a Mars Exploration Rover
Universidad Politécnica de Madrid, Madrid, Spain 2002 - 2007
Ingeniero Superior Aeronáutico (Aeronautical Engineer, 5-year degree), November 2007
· GPA: 9.23/10. Ranked 2nd in the Aerospace specialization and 5th overall. Honors on Diploma Thesis
· Thesis title: Analysis and simulation of the plasma discharge on a Hall thruster prototype
California Institute of Technology (Caltech),Pasadena, California 2010 - present
Graduate Aerospace Laboratories (GALCIT), Space Structures Laboratory
Supervisor: Professor Sergio Pellegrino
Collaborator September 2014 - present
Postdoctoral Research Fellow June – September 2014
Dual-matrix composite self-deployable log-spiral antennas for CubeSats
· Collaborate with the antenna research team to design self-deployable shell structures that integrate log-spiral antennas according to performance and stowage mission requirements
· Source tools and materials for the project within budget constraints
· Lead team to identify and address challenges including material selection, conductor integration, composite lay-up design, and manufacturing techniques
· Validate designed structures through preliminary non-destructive testing and finite element analysis
· Successfully manufacture self-deployable log-spiral antennas performing within the required bandwidth and gain
· Prepare proposals and presentations for the Air Force Office of Scientific Research (AFOSR), who funds the project
Research Assistant June 2010 - June 2014
Experimental research in advanced composite materials
· Collaborated with L’Garde, Inc. to address challenges in flexible fiber composites manufacturing
· Implemented novel material testing methodology to estimate the mechanical properties of the L’Garde flexible composites
· Led research of fiber microbuckling under compression of unidirectional carbon fiber-reinforced silicone composite rods
· Analyzed composite microstructures to obtain statistical data on fiber waviness, misalignment and volume fractions
· Prepared proposals, reports and review presentations with L’Garde, Inc. for NASA-Jet Propulsion Laboratory
Composite material modeling
· Implemented homogenization techniques and linear and non-linear Finite Element models to characterize flexible composite materials
· Implemented statistical values of microstructural properties on Finite Element models to predict the behavior in compression of soft composite rods replicating experimental conditions
· Analyzed experimental and numerical data and compared the results to theoretical estimations to explain the effect of fiber angle distributions on the fiber microbuckling of nominally-unidirectional silicone composite rods
Deployable shell structures
· Identified challenges to manufacture foldable shell structures for deployable space applications
· Designed, manufactured and tested dual-matrix foldable composite shells
· Sourced tools and materials under budget constraints and studied different composite lay-ups and matrix curing processes
· Designed concepts and manufacture prototypes of origami-inspired foldable and self-deployable shell structures
· Proposed dual-matrix composite shells to design deployable wideband antennas for CubeSats
Teaching Assistant 2010 - 2014
· Held office hours, trained students for laboratory coursework, managed laboratory resources, and graded homework, laboratory reports, Master thesis reports, and final exams
· Acquired teaching experience in three courses: Composite Materials (4 trimesters), Theory of Structures (1 trimester), and Experimental Methods (1 trimester)
Universidad Politécnica de Madrid (UPM),Madrid, Spain 2005 – 2009
Department of Mathematics, Escuela Técnica Superior de Ingenieros Aeronáuticos
Supervisor: Professor Eduardo Ahedo
· Developed and implemented new models for the plasma discharge on Hall thrusters
· Performed comparative analysis on the efficiency and accuracy of different plasma–wall interaction models
· Used measurements from a real prototype in order to improve existing models
· Numerical analysis of composite materials and structures: Finite Element Analysis packages ABAQUS/Standard and Explicit
· Additional software: SolidWorks, Solid Edge, Matlab, Tecplot, C++, Fortran, Python, Mathematica, Maple
· Composite materials testing: Instron mechanical systems, Digital Image Correlation, laser extensometers, optical and digital microscopy, SEM
· Fiber composite materials manufacturing with different fibers, fabrics and resins. Experience in vacuum bagging, autoclave curing and UV curing
· Spanish: native language
· English: fluent (5 years of work experience in the USA)
· French: intermediate (writing), basic (speaking)
SCHOLARSHIPS AND AWARDS
· Fulbright Scholarship, Fulbright Foundation, U.S. Department of State and Comunidad de Madrid 2009 - 2014
· Graduate Researcher Training Scholarship, Universidad Politécnica de Madrid 2008 - 2009
· Undergraduate Research Assistant Scholarship, Universidad Politécnica de Madrid 2006 - 2007
· Undergraduate Research Assistant Scholarship, Ministry of Education and Science, Spain 2005 - 2006
· Excellent Academic Performance Grant, Comunidad de Madrid 2002 - 2003
Sakovsky, M., Maqueda. I., Karl, C., Pellegrino, S., and Costantine, J. (2015). Dual-Matrix Composite Wideband Antenna Structures for CubeSats. AIAA Spacecraft Structures Conference, 5-9 January 2015, Kissimmee, FL, AIAA 2015-0944
Maqueda, I., Pellegrino, S. & Mejia-Ariza, J., Characterization of a high strain composite material. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii.
Maqueda, I.,Escobar, D. & Ahedo, E., Advances on a Hall thruster hybrid code, 30th International Electric Propulsion Conference, 17-20 September 2007 Florence, Italy
Ahedo, E.,Maqueda, I.,Antón, A., Raitses, Y. & Fisch, N.J., Numerical simulations of a 2kW Hall thruster, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 9 - 12 July 2006, Sacramento, California
SUPAERO,Toulouse, France Summer 2006
Community of Ariane Cities Summer School (180 hours)
· Attended lectures on aerospace engineering and management in the EU
· Visited French R&D centers and aerospace companies
· Worked in international teams on the design, certification, operation and management of nanolaunchers
· Awarded best project in program: Hybrid Propulsion Nanolaunchers
· Awarded with a visit to the Guiana Space Centre in Kourou, French Guiana
Interests: space technology and exploration, classic guitar, model making, numismatics, photography and travel
Associations:Spanish Fulbright Alumni Association (Member of the Executive Board), AIAA, Caltech Alumni Association, Community of Ariane Cities
Registering is the only way of posting vacancies and obtaining contact details of candidates in our CV database.
All it takes is a few minutes and a credit card (Visa or American Express). To sign-up to this service, simply click on the Register link and fill in the form. You will then have instant access to our system after on-line payment where you will be able to complete the transaction in either US Dollars, UK Pounds or Euros.
All online credit/debit card transitions are handled through our secure third party payment processors at WorldPay. Worldpay are part of The Royal Bank of Scotland Group, the 5th biggest banking group in the world, WorldPay payment solutions are trusted by thousands of businesses, big and small worldwide.
Pricing starts at €450 (approx £400 or US$500 - use the convert tool for an exact conversion) for one month unlimited job postings and unlimited CV database access (for one user), with package discounts available if you have more permanent recruiting needs. For example, a Silver subscription will give you unlimited jobs posting and unlimited CV database access for one year at just €325 per month!
2022 Pricing Structure (excluding VAT):
|1 month - Discovery||450 euros||convert|
|3 months - Bronze||1150 euros||convert|
|6 months - Silver||1950 euros||convert|
If online payment is not convenient, give us a call at +33(0)622757477 or send us an email at firstname.lastname@example.org. We will set up an account for you and invoice you, but in this case, access to our website will be granted only after payment has been received. Note that you can also pay through PayPal.
Please note that the posting of academic positions is free of charge. All you need to do is email us your job description and we will post it for you.
Spacelinks is based in France so the following European Union regulations regarding electronic commerce apply:
- if your business is located outside the EU, VAT does not apply to you
- if your business is located in France, you will be charged a 20% VAT
- if your business is located in the EU and you don't have a valid VAT registration number, you will be charged a 20% VAT
- if your business is located in the EU and you do have a valid VAT registration number, you won't be charged VAT provided you give us your VAT number (mandatory for invoicing)
For sales enquiries and general information, you can call us on +33(0)622757477.
Support is available Mon-Fri on +33(0)622757477 or via email. Out-of-hours support is provided only via email.
Please also note that we are located in France. Our normal office hours are 09:00 to 18:00 Monday to Friday. France timezone is GMT+1.
We are very serious about our job seekers privacy so only legitimate recruiters and employers are eligible for a recruiter account. All subscriptions requests will be manually approved and recruiter accounts constantly monitored. Users who enter inaccurate or incomplete information will not gain access to post jobs or search resumes. Sharing of login details with a third party will result in the suspension of the recruiter's account with no subscription refund.
To ensure you are approved, please include the following on your application:
* The website address of your Company. Under construction websites will be rejected.
* Email - Must end in @yourcompany.com. Applications using free email accounts such as Hotmail, Yahoo or Gmail will be rejected.
Individual exceptions can be made on a case by case basis by emailing email@example.com. Accounts found not to be in compliance will be deleted.